Deep Learning Framework for Wireless Systems: Applications to Optical Wireless Communications

Optical wireless communication (OWC) is a promising technology for future wireless communications owing to its potentials for cost-effective network deployment and high data rate. There are several implementation issues in the OWC which have not been encountered in radio frequency wireless communications. First, practical OWC transmitters need an illumination control on color, intensity, and luminance, etc., which poses complicated modulation design challenges. Furthermore, signal-dependent properties of optical channels raise non-trivial challenges both in modulation and demodulation of the optical signals. To tackle such difficulties, deep learning (DL) technologies can be applied for optical wireless transceiver design. This article addresses recent efforts on DL-based OWC system designs. A DL framework for emerging image sensor communication is proposed and its feasibility is verified by simulation. Finally, technical challenges and implementation issues for the DL-based optical wireless technology are discussed.Comment: To appear in IEEE Communications Magazine, Special Issue on Applications of Artificial Intelligence in Wireless Communication

Cell Detection by Functional Inverse Diffusion and Non-negative Group Sparsity−-Part I: Modeling and Inverse Problems

In this two-part paper, we present a novel framework and methodology to analyze data from certain image-based biochemical assays, e.g., ELISPOT and Fluorospot assays. In this first part, we start by presenting a physical partial differential equations (PDE) model up to image acquisition for these biochemical assays. Then, we use the PDEs' Green function to derive a novel parametrization of the acquired images. This parametrization allows us to propose a functional optimization problem to address inverse diffusion. In particular, we propose a non-negative group-sparsity regularized optimization problem with the goal of localizing and characterizing the biological cells involved in the said assays. We continue by proposing a suitable discretization scheme that enables both the generation of synthetic data and implementable algorithms to address inverse diffusion. We end Part I by providing a preliminary comparison between the results of our methodology and an expert human labeler on real data. Part II is devoted to providing an accelerated proximal gradient algorithm to solve the proposed problem and to the empirical validation of our methodology.Comment: published, 15 page

An Optical Design Configuration for Wireless Data Transmission

The concept of 2D barcodes is of great relevance for use in wireless data transmission between handheld electronic devices. In a typical setup, any file on a cell phone for example can be transferred to a second cell phone through a series of images on the LCD which are then captured and decoded through the camera of the second cell phone. In this research, a new approach for data modulation in 2D barcodes is introduced, and its performance is evaluated in comparison to other standard methods of barcode modulation. In the proposed method, Orthogonal Frequency Division Multiplexing (OFDM) modulation is used together with Differential Phase Shift Keying (DPSK) over adjacent frequency domain elements to modulate intensity of individual pixels. It is shown that the bit error rate performance of the proposed system is superior to the current state of the art in various scenarios. A specific aim of this study is to establish a system that is proven tolerant to camera motion, picture blur and light leakage within neighboring pixels of an LCD. Furthermore, intensity modulation requires the input signal used to modulate a light source to be positive, which requires the addition of a dc bias. In the meantime, the high crest factor of OFDM requires a lower modulation index to limit clipping distortion. These two factors result in poor power efficiency in radio over fiber applications in which signal bandwidth is generally much less than the carrier frequency. In this study, it is shown that clipping a bipolar radio frequency signal at zero level, when it has a carrier frequency sufficiently higher than its bandwidth, results in negligible distortion in the pass band and most of the distortion power is concentrated in the baseband. Consequently, with less power provided to the optical carrier, higher power efficiencies and better receiver sensitivity will result. Finally, a more efficient optical integrated system is introduced to implement the proposed intensity modulation method which is optimized for radio over fiber applications

Line-Field Based Adaptive Image Model for Blind Deblurring

Ph.DDOCTOR OF PHILOSOPH

Etäisyyden huomioiva kaksiulotteinen viivakoodi mobiilikäyttötapauksiin

Global internet use is becoming increasingly mobile, and mobile data usage is growing exponentially. This puts increasing stress on the radio frequency spectrum that cellular and Wi-Fi networks use. As a consequence, research has also been conducted to develop wireless technologies for other parts of the electromagnetic spectrum – namely, visible light. One approach of using the visible light channel for wireless communication leverages barcodes. In this thesis, we propose a 2D barcode that can display different information based on the distance between the barcode and the scanner. Earlier research on distance-sensitive barcodes has focused on providing a closer viewer more information as a closer viewer can see more detail. In contrast, we target use cases where a clear physical separation between users of different roles can be made, such as presentation systems. We evaluate two methods of achieving distance-awareness: color-shifting of individual colors, where a color changes tone at longer distances, and color blending, where two colors blend into a third color at longer viewing distances. Our results show that a modern smartphone is capable of leveraging color-shifting in ideal conditions, but external changes such as ambient lighting render color-shifting unusable in practical scenarios. On the other hand, color blending is robust in varying indoor conditions and can be used to construct a reliable distance-aware barcode. Accordingly, we employ color blending to design a distance-aware barcode. We implement our solution in an off-the-shelf Android smartphone. Experimental results show that our scheme achieves a clear separation between close and far viewers. As a representative use case, we also implement a presentation system where a single barcode provides the presenter access to presentation tools and the audience access to auxiliary presentation material.Maailmanlaajuinen internetin käyttö muuttuu yhä liikkuvammaksi, ja mobiilidatan käyttö kasvaa eksponentiaalisesti. Tämä kohdistaa yhä suurempia vaatimuksia radiotaajuusspektriin, jota mobiili- ja Wi-Fi-verkot käyttävät. Näin ollen tutkijat ovat kehittäneet langattomia teknologioita hyödyntäen myös muita sähkömagneettisen spektrin osia – erityisesti näkyvää valoa. Yksi näkyvän valon sovellus langattomassa viestinnässä ovat viivakoodit. Tässä työssä kehitämme kaksiulotteisen viivakoodin, joka pystyy välittämään eri tietoa katselijoille eri etäisyyksillä. Aiempi etäisyyden huomioivien viivakoodien tutkimus on keskittynyt tarjoamaan lähellä olevalle katselijalle enemmän tietoa, koska läheinen katselija näkee viivakoodin tarkemmin. Sitä vastoin me keskitymme käyttötapauksiin, joissa eri käyttäjäroolien välillä on selkeä etäisyydellinen ero, kuten esimerkiksi esitelmissä puhujan ja yleisön välillä. Tarkastelemme kahta menetelmää: yksittäisten värien muutoksia etäisyyden muuttuessa ja kahden värin sekoittumista etäisyyden kasvaessa. Tulostemme perusteella nykyaikainen älypuhelin pystyy hyödyntämään yksittäisten värien muutoksia ihanteellisissa olosuhteissa, mutta ulkoiset tekijät, kuten ympäristön valaistus, aiheuttavat liian suuria värimuutoksia käytännön käyttötapauksissa. Toisaalta värien sekoittuminen on johdonmukaista muuttuvassa sisäympäristössä ja sitä voidaan käyttää luotettavan viivakoodin luomisessa. Näin ollen me suunnittelemme etäisyyden huomioivan viivakoodin hyödyntäen värien sekoittumista. Toteutamme ratkaisumme yleisesti saatavilla olevalle Android-älypuhelimelle. Kokeellisten tulostemme perusteella menetelmämme saavuttaa selkeän erottelun läheisten ja kaukaisten katselijoiden välillä. Esimerkkikäyttötapauksena toteutamme myös esitelmäjärjestelmän, jossa sama viivakoodi antaa lähellä olevalle puhujalle nopean pääsyn esitystyökaluihin ja kauempana olevalle yleisölle pääsyn esityksen apumateriaaliin

Recent Advances in Signal Processing

The signal processing task is a very critical issue in the majority of new technological inventions and challenges in a variety of applications in both science and engineering fields. Classical signal processing techniques have largely worked with mathematical models that are linear, local, stationary, and Gaussian. They have always favored closed-form tractability over real-world accuracy. These constraints were imposed by the lack of powerful computing tools. During the last few decades, signal processing theories, developments, and applications have matured rapidly and now include tools from many areas of mathematics, computer science, physics, and engineering. This book is targeted primarily toward both students and researchers who want to be exposed to a wide variety of signal processing techniques and algorithms. It includes 27 chapters that can be categorized into five different areas depending on the application at hand. These five categories are ordered to address image processing, speech processing, communication systems, time-series analysis, and educational packages respectively. The book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Multiple-input multiple-output visible light communication receivers for high data-rate mobile applications

Visible light communication (VLC) is an emerging form of optical wireless communication that transmits data by modulating light in the visible spectrum. To meet the growing demand for wireless communication capacity from mobile devices, we investigate multiple-input multiple-output (MIMO) VLC to achieve multiplexing capacity gains and to allow multiple users to simultaneously transmit without disrupting each other. Previous approaches to receive VLC signals have either been unable to simultaneously receive multiple independent signals from multiple transmitters, unable to adapt to moving transmitters and receivers, or unable to sample the received signals fast enough for high-speed VLC. In this dissertation, we develop and evaluate two novel approaches to receive high-speed MIMO VLC signals from mobile transmitters that can be practically scaled to support additional transmitters. The first approach, Token-Based Pixel Selection (TBPS) exploits the redundancy and sparsity of high-resolution transmitter images in imaging VLC receivers to greatly increase the rate at which complementary metal-oxide semiconductor (CMOS) active pixel sensor (APS) image sensors can sample VLC signals though improved signal routing to enable such high-resolution image sensors to capture high-speed VLC signals. We further model the CMOS APS pixel as a linear shift-invariant system, investigate how it scales to support additional transmitters and higher resolutions, and investigate how noise can affect its performance. The second approach, a spatial light modulator (SLM)-based VLC receiver, uses an SLM to dynamically control the resulting wireless channel matrix to enable relatively few photodetectors to reliably receive from multiple transmitters despite their movements. As part of our analysis, we develop a MIMO VLC channel capacity model that accounts for the non-negativity and peak-power constraints of VLC systems to evaluate the performance of the SLM VLC receiver and to facilitate the optimization of the channel matrix through the SLM