1,158 research outputs found
Towards electrodeless EMG linear envelope signal recording for myo-activated prostheses control
After amputation, the residual muscles of the limb may function in a normal way, enabling the electromyogram (EMG) signals recorded from them to be used to drive a replacement limb. These replacement limbs are called myoelectric prosthesis. The prostheses that use EMG have always been the first choice for both clinicians and engineers. Unfortunately, due to the many drawbacks of EMG (e.g. skin preparation, electromagnetic interferences, high sample rate, etc.); researchers have aspired to find suitable alternatives. One proposes the dry-contact, low-cost sensor based on a force-sensitive resistor (FSR) as a valid alternative which instead of detecting electrical events, detects mechanical events of muscle. FSR sensor is placed on the skin through a hard, circular base to sense the muscle contraction and to acquire the signal. Similarly, to reduce the output drift (resistance) caused by FSR edges (creep) and to maintain the FSR sensitivity over a wide input force range, signal conditioning (Voltage output proportional to force) is implemented. This FSR signal acquired using FSR sensor can be used directly to replace the EMG linear envelope (an important control signal in prosthetics applications). To find the best FSR position(s) to replace a single EMG lead, the simultaneous recording of EMG and FSR output is performed. Three FSRs are placed directly over the EMG electrodes, in the middle of the targeted muscle and then the individual (FSR1, FSR2 and FSR3) and combination of FSR (e.g. FSR1+FSR2, FSR2-FSR3) is evaluated. The experiment is performed on a small sample of five volunteer subjects. The result shows a high correlation (up to 0.94) between FSR output and EMG linear envelope. Consequently, the usage of the best FSR sensor position shows the ability of electrode less FSR-LE to proportionally control the prosthesis (3-D claw). Furthermore, FSR can be used to develop a universal programmable muscle signal sensor that can be suitable to control the myo-activated prosthesis
A Review of EMG Techniques for Detection of Gait Disorders
Electromyography (EMG) is a commonly used technique to record myoelectric signals, i.e., motor neuron signals that originate from the central nervous system (CNS) and synergistically activate groups of muscles resulting in movement. EMG patterns underlying movement, recorded using surface or needle electrodes, can be used to detect movement and gait abnormalities. In this review article, we examine EMG signal processing techniques that have been applied for diagnosing gait disorders. These techniques span from traditional statistical tests to complex machine learning algorithms. We particularly emphasize those techniques are promising for clinical applications. This study is pertinent to both medical and engineering research communities and is potentially helpful in advancing diagnostics and designing rehabilitation devices
Relating forearm muscle electrical activity to finger forces
The electromyogram (EMG) signal is desired to be used as a control signal for applications such as multifunction prostheses, wheelchair navigation, gait generation, grasping control, virtual keyboards, and gesture-based interfaces [25]. Several research studies have attempted to relate the electromyogram (EMG) activity of the forearm muscles to the mechanical activity of the wrist, hand and/or fingers [41], [42], [43]. A primary interest is for EMG control of powered upper-limb prostheses and rehabilitation orthotics. Existing commercial EMG-controlled devices are limited to rudimentary control capabilities of either discrete states (e.g. hand close/open), or one degree of freedom proportional control [4], [36]. Classification schemes for discriminating between hand/wrist functions and individual finger movements have demonstrated accuracy up to 95% [38], [39], [29]. These methods may provide for increased amputee function, though continuous control of movement is not generally achieved. This thesis considered proportional control via EMG-based estimation of finger forces with the goal of identifying whether multiple degrees of freedom of proportional control information are available from the surface EMG of the forearm. Electromyogram (EMG) activity from the extensor and flexor muscles of the forearm was sensed with bipolar surface electrodes and related to the force produced at the four fingertips during constant-posture, slowly force-varying contractions from 20 healthy subjects. The contractions ranged between 30% maximum voluntary contractions (MVC) extension and 30% MVC flexion. EMG amplitude sampling rate, least squares regularization, linear vs. nonlinear models and number of electrodes used in the system identification were studied. Results are supportive that multiple degrees of freedom of proportional control information are available from the surface EMG of the forearm, at least in healthy subjects. An EMG amplitude sampling frequency of 4.096 Hz was found to produce models which allowed for good EMG amplitude estimates. Least squares regularization with a pseudo-inverse tolerance of 0.055 resulted in significant improvement in modeling results, with an average error of 4.69% MVC-6.59% MVC (maximum voluntary contraction). Increasing polynomial order did not significantly improve modeling results. Results from smaller electrode arrays remained fairly good with as few as six electrodes, with the average %MVC error ranging from 5.13%-7.01% across the four fingers. This study also identified challenges in the current experimental study design and subsequent system identification when EMG-force modeling is performed with four fingers simultaneously. Methods to compensate for these issues have been proposed in this thesis
Time series morphological analysis applied to biomedical signals events detection
Dissertation submitted in the fufillment of the requirements for the Degree of Master in Biomedical EngineeringAutomated techniques for biosignal data acquisition and analysis have become increasingly powerful, particularly at the Biomedical Engineering research field. Nevertheless, it is verified the need to improve tools for signal pattern recognition and classification systems, in which the detection of specific events and the automatic signal segmentation are preliminary
processing steps.
The present dissertation introduces a signal-independent algorithm, which detects significant events in a biosignal. From a time series morphological analysis, the algorithm computes the instants when the most significant standard deviation discontinuities occur, segmenting the signal. An iterative optimization step is then applied. This assures that a minimal error is achieved when modeling these segments with polynomial regressions. The adjustment of a scale factor gives different detail levels of events detection.
An accurate and objective algorithm performance evaluation procedure was designed.
When applied on a set of synthetic signals, with known and quantitatively predefined events, an overall mean error of 20 samples between the detected and the actual events showed the high accuracy of the proposed algorithm. Its ability to perform the detection of signal activation onsets and transient waveshapes was also assessed, resulting in higher reliability than
signal-specific standard methods.
Some case studies, with signal processing requirements for which the developed algorithm can be suitably applied, were approached. The algorithm implementation in real-time, as part of an application developed during this research work, is also reported.
The proposed algorithm detects significant signal events with accuracy and significant
noise immunity. Its versatile design allows the application in different signals without previous knowledge on their statistical properties or specific preprocessing steps. It also brings added objectivity when compared with the exhaustive and time-consuming examiner analysis.
The tool introduced in this dissertation represents a relevant contribution in events detection, a particularly important issue within the wide digital biosignal processing research field
Home detection of freezing of gait using Support Vector Machines through a single waist-worn triaxial accelerometer
Among Parkinson’s disease (PD) symptoms, freezing of gait (FoG) is one of the most debilitating. To assess FoG, current clinical practice mostly employs repeated evaluations over weeks and months based on questionnaires, which may not accurately map the severity of this symptom. The use of a non-invasive system to monitor the activities of daily living (ADL) and the PD symptoms experienced by patients throughout the day could provide a more accurate and objective evaluation of FoG in order to better understand the evolution of the disease and allow for a more informed decision-making process in making adjustments to the patient’s treatment plan. This paper presents a new algorithm to detect FoG with a machine learning approach based on Support Vector Machines (SVM) and a single tri-axial accelerometer worn at the waist. The method is evaluated through the acceleration signals in an outpatient setting gathered from 21 PD patients at their home and evaluated under two different conditions: first, a generic model is tested by using a leave-one-out approach and, second, a personalised model that also uses part of the dataset from each patient. Results show a significant improvement in the accuracy of the personalised model compared to the generic model, showing enhancement in the specificity and sensitivity geometric mean (GM) of 7.2%. Furthermore, the SVM approach adopted has been compared to the most comprehensive FoG detection method currently in use (referred to as MBFA in this paper). Results of our novel generic method provide an enhancement of 11.2% in the GM compared to the MBFA generic model and, in the case of the personalised model, a 10% of improvement with respect to the MBFA personalised model. Thus, our results show that a machine learning approach can be used to monitor FoG during the daily life of PD patients and, furthermore, personalised models for FoG detection can be used to improve monitoring accuracy.Peer ReviewedPostprint (published version
Pattern recognition-based real-time myoelectric control for anthropomorphic robotic systems : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Mechatronics at Massey University, Manawatū, New Zealand
All copyrighted Figures have been removed but may be accessed via their source cited in their respective captions.Advanced human-computer interaction (HCI) or human-machine interaction (HMI) aims to help
humans interact with computers smartly. Biosignal-based technology is one of the most promising
approaches in developing intelligent HCI systems. As a means of convenient and non-invasive
biosignal-based intelligent control, myoelectric control identifies human movement intentions from
electromyogram (EMG) signals recorded on muscles to realise intelligent control of robotic systems.
Although the history of myoelectric control research has been more than half a century, commercial
myoelectric-controlled devices are still mostly based on those early threshold-based methods. The
emerging pattern recognition-based myoelectric control has remained an active research topic in
laboratories because of insufficient reliability and robustness. This research focuses on pattern
recognition-based myoelectric control. Up to now, most of effort in pattern recognition-based
myoelectric control research has been invested in improving EMG pattern classification accuracy.
However, high classification accuracy cannot directly lead to high controllability and usability for
EMG-driven systems. This suggests that a complete system that is composed of relevant modules,
including EMG acquisition, pattern recognition-based gesture discrimination, output equipment and its
controller, is desirable and helpful as a developing and validating platform that is able to closely emulate
real-world situations to promote research in myoelectric control.
This research aims at investigating feasible and effective EMG signal processing and pattern
recognition methods to extract useful information contained in EMG signals to establish an intelligent,
compact and economical biosignal-based robotic control system. The research work includes in-depth
study on existing pattern recognition-based methodologies, investigation on effective EMG signal
capturing and data processing, EMG-based control system development, and anthropomorphic robotic
hand design. The contributions of this research are mainly in following three aspects:
Developed precision electronic surface EMG (sEMG) acquisition methods that are able to
collect high quality sEMG signals. The first method was designed in a single-ended signalling
manner by using monolithic instrumentation amplifiers to determine and evaluate the analog
sEMG signal processing chain architecture and circuit parameters. This method was then
evolved into a fully differential analog sEMG detection and collection method that uses
common commercial electronic components to implement all analog sEMG amplification and
filtering stages in a fully differential way. The proposed fully differential sEMG detection and collection method is capable of offering a higher signal-to-noise ratio in noisy environments
than the single-ended method by making full use of inherent common-mode noise rejection
capability of balanced signalling. To the best of my knowledge, the literature study has not
found similar methods that implement the entire analog sEMG amplification and filtering chain
in a fully differential way by using common commercial electronic components.
Investigated and developed a reliable EMG pattern recognition-based real-time gesture
discrimination approach. Necessary functional modules for real-time gesture discrimination
were identified and implemented using appropriate algorithms. Special attention was paid to
the investigation and comparison of representative features and classifiers for improving
accuracy and robustness. A novel EMG feature set was proposed to improve the performance
of EMG pattern recognition.
Designed an anthropomorphic robotic hand construction methodology for myoelectric control
validation on a physical platform similar to in real-world situations. The natural anatomical
structure of the human hand was imitated to kinematically model the robotic hand. The
proposed robotic hand is a highly underactuated mechanism, featuring 14 degrees of freedom
and three degrees of actuation.
This research carried out an in-depth investigation into EMG data acquisition and EMG signal pattern
recognition. A series of experiments were conducted in EMG signal processing and system
development. The final myoelectric-controlled robotic hand system and the system testing confirmed
the effectiveness of the proposed methods for surface EMG acquisition and human hand gesture
discrimination. To verify and demonstrate the proposed myoelectric control system, real-time tests were
conducted onto the anthropomorphic prototype robotic hand. Currently, the system is able to identify
five patterns in real time, including hand open, hand close, wrist flexion, wrist extension and the rest
state. With more motion patterns added in, this system has the potential to identify more hand
movements. The research has generated a few journal and international conference publications
Classification of EMG signals to control a prosthetic hand using time-frequesncy representations and Support Vector Machines
Myoelectric signals (MES) are viable control signals for externally-powered prosthetic devices. They may improve both the functionality and the cosmetic appearance of these devices. Conventional controllers, based on the signal\u27s amplitude features in the control strategy, lack a large number of controllable states because signals from independent muscles are required for each degree of freedom (DoF) of the device. Myoelectric pattern recognition systems can overcome this problem by discriminating different residual muscle movements instead of contraction levels of individual muscles. However, the lack of long-term robustness in these systems and the design of counter-intuitive control/command interfaces have resulted in low clinical acceptance levels. As a result, the development of robust, easy to use myoelectric pattern recognition-based control systems is the main challenge in the field of prosthetic control.
This dissertation addresses the need to improve the controller\u27s robustness by designing a pattern recognition-based control system that classifies the user\u27s intention to actuate the prosthesis. This system is part of a cost-effective prosthetic hand prototype developed to achieve an acceptable level of functional dexterity using a simple to use interface. A Support Vector Machine (SVM) classifier implemented as a directed acyclic graph (DAG) was created. It used wavelet features from multiple surface EMG channels strategically placed over five forearm muscles. The classifiers were evaluated across seven subjects. They were able to discriminate five wrist motions with an accuracy of 91.5%. Variations of electrode locations were artificially introduced at each recording session as part of the procedure, to obtain data that accounted for the changes in the user\u27s muscle patterns over time. The generalization ability of the SVM was able to capture most of the variability in the data and to maintain an average classification accuracy of 90%.
Two principal component analysis (PCA) frameworks were also evaluated to study the relationship between EMG recording sites and the need for feature space reduction. The dimension of the new feature set was reduced with the goal of improving the classification accuracy and reducing the computation time. The analysis indicated that the projection of the wavelet features into a reduced feature space did not significantly improve the accuracy and the computation time. However, decreasing the number of wavelet decomposition levels did lower the computational load without compromising the average signal classification accuracy.
Based on the results of this work, a myoelectric pattern recognition-based control system that uses an SVM classifier applied to time-frequency features may be used to discriminate muscle contraction patterns for prosthetic applications
Fatigue Evaluation through Machine Learning and a Global Fatigue Descriptor
Research in physiology and sports science has shown that fatigue, a complex psychophysiological phenomenon, has a relevant
impact in performance and in the correct functioning of our motricity system, potentially being a cause of damage to the human
organism. Fatigue can be seen as a subjective or objective phenomenon. Subjective fatigue corresponds to a mental and cognitive
event, while fatigue referred as objective is a physical phenomenon. Despite the fact that subjective fatigue is often undervalued,
only a physically and mentally healthy athlete is able to achieve top performance in a discipline. )erefore, we argue that physical
training programs should address the preventive assessment of both subjective and objective fatigue mechanisms in order to
minimize the risk of injuries. In this context, our paper presents a machine-learning system capable of extracting individual fatigue
descriptors (IFDs) from electromyographic (EMG) and heart rate variability (HRV) measurements. Our novel approach, using
two types of biosignals so that a global (mental and physical) fatigue assessment is taken into account, reflects the onset of fatigue
by implementing a combination of a dimensionless (0-1) global fatigue descriptor (GFD) and a support vector machine (SVM)
classifier. )e system, based on 9 main combined features, achieves fatigue regime classification performances of 0.82 ± 0.24,
ensuring a successful preventive assessment when dangerous fatigue levels are reached. Training data were acquired in a constant
work rate test (executed by 14 subjects using a cycloergometry device), where the variable under study (fatigue) gradually
increased until the volunteer reached an objective exhaustion state
- …