33 research outputs found
MIMO-aided near-capacity turbo transceivers: taxonomy and performance versus complexity
In this treatise, we firstly review the associated Multiple-Input Multiple-Output (MIMO) system theory and review the family of hard-decision and soft-decision based detection algorithms in the context of Spatial Division Multiplexing (SDM) systems. Our discussions culminate in the introduction of a range of powerful novel MIMO detectors, such as for example Markov Chain assisted Minimum Bit-Error Rate (MC-MBER) detectors, which are capable of reliably operating in the challenging high-importance rank-deficient scenarios, where there are more transmitters than receivers and hence the resultant channel-matrix becomes non-invertible. As a result, conventional detectors would exhibit a high residual error floor. We then invoke the Soft-Input Soft-Output (SISO) MIMO detectors for creating turbo-detected two- or three-stage concatenated SDM schemes and investigate their attainable performance in the light of their computational complexity. Finally, we introduce the powerful design tools of EXtrinsic Information Transfer (EXIT)-charts and characterize the achievable performance of the diverse near- capacity SISO detectors with the aid of EXIT charts
Turbo Decoding and Detection for Wireless Applications
A historical perspective of turbo coding and turbo transceivers inspired by the generic turbo principles is provided, as it evolved from Shannon’s visionary predictions. More specifically, we commence by discussing the turbo principles, which have been shown to be capable of performing close to Shannon’s capacity limit. We continue by reviewing the classic maximum a posteriori probability decoder. These discussions are followed by studying the effect of a range of system parameters in a systematic fashion, in order to gauge their performance ramifications. In the second part of this treatise, we focus our attention on the family of iterative receivers designed for wireless communication systems, which were partly inspired by the invention of turbo codes. More specifically, the family of iteratively detected joint coding and modulation schemes, turbo equalization, concatenated spacetime and channel coding arrangements, as well as multi-user detection and three-stage multimedia systems are highlighted
Turbo Packet Combining Strategies for the MIMO-ISI ARQ Channel
This paper addresses the issue of efficient turbo packet combining techniques
for coded transmission with a Chase-type automatic repeat request (ARQ)
protocol operating over a multiple-input--multiple-output (MIMO) channel with
intersymbol interference (ISI). First of all, we investigate the outage
probability and the outage-based power loss of the MIMO-ISI ARQ channel when
optimal maximum a posteriori (MAP) turbo packet combining is used at the
receiver. We show that the ARQ delay (i.e., the maximum number of ARQ rounds)
does not completely translate into a diversity gain. We then introduce two
efficient turbo packet combining algorithms that are inspired by minimum mean
square error (MMSE)-based turbo equalization techniques. Both schemes can be
viewed as low-complexity versions of the optimal MAP turbo combiner. The first
scheme is called signal-level turbo combining and performs packet combining and
multiple transmission ISI cancellation jointly at the signal-level. The second
scheme, called symbol-level turbo combining, allows ARQ rounds to be separately
turbo equalized, while combining is performed at the filter output. We conduct
a complexity analysis where we demonstrate that both algorithms have almost the
same computational cost as the conventional log-likelihood ratio (LLR)-level
combiner. Simulation results show that both proposed techniques outperform
LLR-level combining, while for some representative MIMO configurations,
signal-level combining has better ISI cancellation capability and achievable
diversity order than that of symbol-level combining.Comment: 13 pages, 7 figures, and 2 table
Self-concatenated coding for wireless communication systems
In this thesis, we have explored self-concatenated coding schemes that are designed for transmission over Additive White Gaussian Noise (AWGN) and uncorrelated Rayleigh fading channels. We designed both the symbol-based Self-ConcatenatedCodes considered using Trellis Coded Modulation (SECTCM) and bit-based Self- Concatenated Convolutional Codes (SECCC) using a Recursive Systematic Convolutional (RSC) encoder as constituent codes, respectively. The design of these codes was carried out with the aid of Extrinsic Information Transfer (EXIT) charts. The EXIT chart based design has been found an efficient tool in finding the decoding convergence threshold of the constituent codes. Additionally, in order to recover the information loss imposed by employing binary rather than non-binary schemes, a soft decision demapper was introduced in order to exchange extrinsic information withthe SECCC decoder. To analyse this information exchange 3D-EXIT chart analysis was invoked for visualizing the extrinsic information exchange between the proposed Iteratively Decoding aided SECCC and soft-decision demapper (SECCC-ID). Some of the proposed SECTCM, SECCC and SECCC-ID schemes perform within about 1 dB from the AWGN and Rayleigh fading channels’ capacity. A union bound analysis of SECCC codes was carried out to find the corresponding Bit Error Ratio (BER) floors. The union bound of SECCCs was derived for communications over both AWGN and uncorrelated Rayleigh fading channels, based on a novel interleaver concept.Application of SECCCs in both UltraWideBand (UWB) and state-of-the-art video-telephone schemes demonstrated its practical benefits.In order to further exploit the benefits of the low complexity design offered by SECCCs we explored their application in a distributed coding scheme designed for cooperative communications, where iterative detection is employed by exchanging extrinsic information between the decoders of SECCC and RSC at the destination. In the first transmission period of cooperation, the relay receives the potentially erroneous data and attempts to recover the information. The recovered information is then re-encoded at the relay using an RSC encoder. In the second transmission period this information is then retransmitted to the destination. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel-concatenated encoder. At the destination a Distributed Binary Self-Concatenated Coding scheme using Iterative Decoding (DSECCC-ID) was employed, where the two decoders (SECCC and RSC) exchange their extrinsic information. It was shown that the DSECCC-ID is a low-complexity scheme, yet capable of approaching the Discrete-input Continuous-output Memoryless Channels’s (DCMC) capacity.Finally, we considered coding schemes designed for two nodes communicating with each other with the aid of a relay node, where the relay receives information from the two nodes in the first transmission period. At the relay node we combine a powerful Superposition Coding (SPC) scheme with SECCC. It is assumed that decoding errors may be encountered at the relay node. The relay node then broadcasts this information in the second transmission period after re-encoding it, again, using a SECCC encoder. At the destination, the amalgamated block of Successive Interference Cancellation (SIC) scheme combined with SECCC then detects and decodes the signal either with or without the aid of a priori information. Our simulation results demonstrate that the proposed scheme is capable of reliably operating at a low BER for transmission over both AWGN and uncorrelated Rayleigh fading channels. We compare the proposed scheme’s performance to a direct transmission link between the two sources having the same throughput
Transmission strategies for broadband wireless systems with MMSE turbo equalization
This monograph details efficient transmission strategies for single-carrier wireless broadband communication systems employing iterative (turbo) equalization. In particular, the first part focuses on the design and analysis of low complexity and robust MMSE-based turbo equalizers operating in the frequency domain. Accordingly, several novel receiver schemes are presented which improve the convergence properties and error performance over the existing turbo equalizers. The second part discusses concepts and algorithms that aim to increase the power and spectral efficiency of the communication system by efficiently exploiting the available resources at the transmitter side based upon the channel conditions. The challenging issue encountered in this context is how the transmission rate and power can be optimized, while a specific convergence constraint of the turbo equalizer is guaranteed.Die vorliegende Arbeit beschäftigt sich mit dem Entwurf und der Analyse von
effizienten Übertragungs-konzepten für drahtlose, breitbandige
Einträger-Kommunikationssysteme mit iterativer (Turbo-) Entzerrung und
Kanaldekodierung. Dies beinhaltet einerseits die Entwicklung von
empfängerseitigen Frequenzbereichs-entzerrern mit geringer Komplexität
basierend auf dem Prinzip der Soft Interference Cancellation Minimum-Mean
Squared-Error (SC-MMSE) Filterung und andererseits den Entwurf von
senderseitigen Algorithmen, die durch Ausnutzung von
Kanalzustandsinformationen die Bandbreiten- und Leistungseffizienz in Ein-
und Mehrnutzersystemen mit Mehrfachantennen (sog. Multiple-Input
Multiple-Output (MIMO)) verbessern.
Im ersten Teil dieser Arbeit wird ein allgemeiner Ansatz für Verfahren zur
Turbo-Entzerrung nach dem Prinzip der linearen MMSE-Schätzung, der
nichtlinearen MMSE-Schätzung sowie der kombinierten MMSE- und
Maximum-a-Posteriori (MAP)-Schätzung vorgestellt. In diesem Zusammenhang
werden zwei neue Empfängerkonzepte, die eine Steigerung der
Leistungsfähigkeit und Verbesserung der Konvergenz in Bezug auf
existierende SC-MMSE Turbo-Entzerrer in verschiedenen Kanalumgebungen
erzielen, eingeführt. Der erste Empfänger - PDA SC-MMSE - stellt eine
Kombination aus dem Probabilistic-Data-Association (PDA) Ansatz und dem
bekannten SC-MMSE Entzerrer dar. Im Gegensatz zum SC-MMSE nutzt der PDA
SC-MMSE eine interne Entscheidungsrückführung, so dass zur Unterdrückung
von Interferenzen neben den a priori Informationen der Kanaldekodierung
auch weiche Entscheidungen der vorherigen Detektions-schritte
berücksichtigt werden. Durch die zusätzlich interne
Entscheidungsrückführung erzielt der PDA SC-MMSE einen wesentlichen Gewinn
an Performance in räumlich unkorrelierten MIMO-Kanälen gegenüber dem
SC-MMSE, ohne dabei die Komplexität des Entzerrers wesentlich zu erhöhen.
Der zweite Empfänger - hybrid SC-MMSE - bildet eine Verknüpfung von
gruppenbasierter SC-MMSE Frequenzbereichsfilterung und MAP-Detektion.
Dieser Empfänger besitzt eine skalierbare Berechnungskomplexität und weist
eine hohe Robustheit gegenüber räumlichen Korrelationen in MIMO-Kanälen
auf. Die numerischen Ergebnisse von Simulationen basierend auf Messungen
mit einem Channel-Sounder in Mehrnutzerkanälen mit starken räumlichen
Korrelationen zeigen eindrucksvoll die Überlegenheit des hybriden
SC-MMSE-Ansatzes gegenüber dem konventionellen SC-MMSE-basiertem Empfänger.
Im zweiten Teil wird der Einfluss von System- und Kanalmodellparametern auf
die Konvergenzeigenschaften der vorgestellten iterativen Empfänger mit
Hilfe sogenannter Korrelationsdiagramme untersucht. Durch semi-analytische
Berechnungen der Entzerrer- und Kanaldecoder-Korrelationsfunktionen wird
eine einfache Berechnungsvorschrift zur Vorhersage der
Bitfehlerwahrscheinlichkeit von SC-MMSE und PDA SC-MMSE Turbo Entzerrern
für MIMO-Fadingkanäle entwickelt. Des Weiteren werden zwei Fehlerschranken
für die Ausfallwahrscheinlichkeit der Empfänger vorgestellt. Die
semi-analytische Methode und die abgeleiteten Fehlerschranken ermöglichen
eine aufwandsgeringe Abschätzung sowie Optimierung der Leistungsfähigkeit
des iterativen Systems.
Im dritten und abschließenden Teil werden Strategien zur Raten- und
Leistungszuweisung in Kommunikationssystemen mit konventionellen iterativen
SC-MMSE Empfängern untersucht. Zunächst wird das Problem der Maximierung
der instantanen Summendatenrate unter der Berücksichtigung der Konvergenz
des iterativen Empfängers für einen Zweinutzerkanal mit fester
Leistungsallokation betrachtet. Mit Hilfe des Flächentheorems von
Extrinsic-Information-Transfer (EXIT)-Funktionen wird eine obere Schranke
für die erreichbare Ratenregion hergeleitet. Auf Grundlage dieser Schranke
wird ein einfacher Algorithmus entwickelt, der für jeden Nutzer aus einer
Menge von vorgegebenen Kanalcodes mit verschiedenen Codierraten denjenigen
auswählt, der den instantanen Datendurchsatz des Mehrnutzersystems
verbessert. Neben der instantanen Ratenzuweisung wird auch ein
ausfallbasierter Ansatz zur Ratenzuweisung entwickelt. Hierbei erfolgt die
Auswahl der Kanalcodes für die Nutzer unter Berücksichtigung der Einhaltung
einer bestimmten Ausfallwahrscheinlichkeit (outage probability) des
iterativen Empfängers. Des Weiteren wird ein neues Entwurfskriterium für
irreguläre Faltungscodes hergeleitet, das die Ausfallwahrscheinlichkeit von
Turbo SC-MMSE Systemen verringert und somit die Zuverlässigkeit der
Datenübertragung erhöht. Eine Reihe von Simulationsergebnissen von
Kapazitäts- und Durchsatzberechnungen werden vorgestellt, die die
Wirksamkeit der vorgeschlagenen Algorithmen und Optimierungsverfahren in
Mehrnutzerkanälen belegen. Abschließend werden außerdem verschiedene
Maßnahmen zur Minimierung der Sendeleistung in Einnutzersystemen mit
senderseitiger Singular-Value-Decomposition (SVD)-basierter Vorcodierung
untersucht. Es wird gezeigt, dass eine Methode, welche die Leistungspegel
des Senders hinsichtlich der Bitfehlerrate des iterativen Empfängers
optimiert, den konventionellen Verfahren zur Leistungszuweisung überlegen
ist
Low-complexity soft-decision feedback turbo equalization for multilevel modulations
This dissertation proposes two new decision feedback equalization schemes suitable for multilevel modulation systems employing turbo equalization. One is soft-decision feedback equalization (SDFE) that takes into account the reliability of both soft a priori information and soft decisions of the data symbols. The proposed SDFE exhibits lower signal to noise ratio (SNR) threshold that is required for water fall bit error rate (BER) and much faster convergence than the near-optimal exact minimum mean square error linear equalizer (Exact-MMSE-LE) for high-order constellation modulations. The proposed SDFE also offers a low computational complexity compared to the Exact-MMSE-LE. The drawback of the SDFE is that its coefficients cannot reach the matched filter bound (MFB) and therefore after a large number of iterations (e.g. 10), its performance becomes inferior to that of the Exact-MMSE-LE. Therefore, soft feedback intersymbol interference (ISI) canceller-based (SIC) structure is investigated. The SIC structure not only exhibits the same low complexity, low SNR threshold and fast convergence as the SDFE but also reaches the MFB after a large number of iterations. Both theoretical analysis and numerical simulations demonstrate why the SIC achieves MFB while the SDFE cannot. These two turbo equalization structures are also extended from single-input single-output (SISO) systems to multiple-input multiple-output (MIMO) systems and applied in high data-rate underwater acoustic (UWA) communications --Abstract, page iv
Achievable rates of iterative MIMO receivers over interference channels
In this thesis, we study the achievable rates of some interference communication schemes when iterative interference-cancellation (IC) is applied. We assume multiple-input multiple-output (MIMO) communication employing iterative receivers with linear front-ends which involves two modules concatenated serially and cooperating iteratively; a linear combiner based on minimum-mean-square-error (MMSE) detection or maximal-ratio-combining (MRC) and a SISO decoder. We investigate the achievable rates of this receiver when the transmitted signal is Gaussian-distributed with hypothetical erasure-type feedback from the decoder to the combiner and a more practical case with large-size QAM constellations with log-likelihood-ratios (LLRs) being exchanged between the receiver's modules. The achievable rate is approximated by the area below the EXIT curve of the linear FE receiver. Some properties have been observed and mathematically been proved about the iterative MIMO receivers with linear front-end
Self-concatenated code design and its application in power-efficient cooperative communications
In this tutorial, we have focused on the design of binary self-concatenated coding schemes with the help of EXtrinsic Information Transfer (EXIT) charts and Union bound analysis. The design methodology of future iteratively decoded self-concatenated aided cooperative communication schemes is presented. In doing so, we will identify the most important milestones in the area of channel coding, concatenated coding schemes and cooperative communication systems till date and suggest future research directions
Cross-layer hybrid automatic repeat request error control with turbo processing for wireless system
The increasing demand for wireless communication system requires an efficient design in wireless communication system. One of the main challenges is to design error control mechanism in noisy wireless channel. Forward Error Correction (FEC) and Automatic Repeat reQuest (ARQ) are two main error control mechanisms. Hybrid ARQ allows the use of either FEC or ARQ when required. The issues with existing Hybrid ARQ are reliability, complexity and inefficient design. Therefore, the design of Hybrid ARQ needs to be further improved in order to achieve performance close to the Shannon capacity. The objective of this research is to develop a Cross-Layer Design Hybrid ARQ defined as CLD_ARQ to further minimize error in wireless communication system. CLD_ARQ comprises of three main stages. First, a low complexity FEC defined as IRC_FEC for error detection and correction has been developed by using Irregular Repetition Code (IRC) with Turbo processing. The second stage is the enhancement of IRC_FEC defined as EM_IRC_FEC to improve the reliability of error detection by adopting extended mapping. The last stage is the development of efficient CLD_ARQ to include retransmission for error correction that exploits EM_IRC_FEC and ARQ. In the proposed design, serial iterative decoding and parallel iterative decoding are deployed in the error detection and correction. The performance of the CLD_ARQ is evaluated in the Additive White Gaussian Noise (AWGN) channel using EXtrinsic Information Transfer (EXIT) chart, bit error rate (BER) and throughput analysis. The results show significant Signal-to-Noise Ratio (SNR) gain from the theoretical limit at BER of 10-5. IRC_FEC outperforms Recursive Systematic Convolutional Code (RSCC) by SNR gain up to 7% due to the use of IRC as a simple channel coding code. The usage of CLD_ARQ enhances the SNR gain by 53% compared to without ARQ due to feedback for retransmission. The adoption of extended mapping in the CLD_ARQ improves the SNR gain up to 50% due to error detection enhancement. In general, the proposed CLD_ARQ can achieve low BER and close to the Shannon‘s capacity even in worse channel condition