Green inter-cluster interference management in uplink of multi-cell processing systems

This paper examines the uplink of cellular systems employing base station cooperation for joint signal processing. We consider clustered cooperation and investigate effective techniques for managing inter-cluster interference to improve users' performance in terms of both spectral and energy efficiency. We use information theoretic analysis to establish general closed form expressions for the system achievable sum rate and the users' Bit-per-Joule capacity while adopting a realistic user device power consumption model. Two main inter-cluster interference management approaches are identified and studied, i.e., through: 1) spectrum re-use; and 2) users' power control. For the former case, we show that isolating clusters by orthogonal resource allocation is the best strategy. For the latter case, we introduce a mathematically tractable user power control scheme and observe that a green opportunistic transmission strategy can significantly reduce the adverse effects of inter-cluster interference while exploiting the benefits from cooperation. To compare the different approaches in the context of real-world systems and evaluate the effect of key design parameters on the users' energy-spectral efficiency relationship, we fit the analytical expressions into a practical macrocell scenario. Our results demonstrate that significant improvement in terms of both energy and spectral efficiency can be achieved by energy-aware interference management

Resource Allocation for Wireless-Powered Full-Duplex Relaying Systems with Nonlinear Energy Harvesting Efficiency

In wireless power transfer (WPT)-assisted relaying systems, spectral efficiency (SE) of source-relay link plays a dominant role in system SE performance due to the limited transmission power at the WPT-aided relay. In this paper, we propose a novel protocol for a downlink orthogonal frequency division multiple access (OFDMA) system with a WPT-aided relay operating in full-duplex (FD) decode-and-forward (DF) mode, where the time slot durations of the source-relay and relay-users hops are designed to be dynamic, to enhance the utilization of degrees of freedom and hence the system SE. In particular, a multiple-input and signal-output (MISO) source-relay channel is considered to satisfy the stringent sensitivity of the energy harvesting (EH) circuit at the relay, while a single-input and single-output (SISO) relay-user channel is considered to alleviate the power consumption at the relay node. Taking into account the non-linearity of EH efficiency, a near-optimal iteration-based dynamic WPT-aided FD relaying (A-FR) algorithm is developed by jointly optimizing the time slot durations, subcarriers, and transmission power at the source and the relay. Furthermore, self-interference generated at the relay is utilized as a vital energy source rather than being canceled, which increases substantially the total energy harvested at the FD relay. We also reveal some implicit characteristics of the considered WPT-aided FD relaying system through intensive discussions. Simulation results confirm that the proposed A-FR achieves a significant enhancement in terms of SE with different relay's locations and the number of users, compared to the conventional symmetric WPT-aided FD relaying (S-FR) and the time-switching-based WPT-aided FD relaying (TS-FR) benchmarks

Polarization handling in photonic integrated circuits

Photonic Integrated Circuits (PICs) are usually polarization dependent. A changing polarization of the light coupled into these circuits can severely degrade their performance. On-chip manipulation of the polarization can help to improve this and to add extra functionality based on polarization. The aim of this thesis is to develop a generic integration technology with polarization handling capability. The main effort of the work focusses on extending the standard technology for PICs with a new type of polarization converter. Furthermore a novel type of polarization splitter has been developed that consists of a passive Mach Zehnder Interferometer and polarization converters. Thus by only adding a polarization converter, the generic platform with polarization handling, including a polarization splitter is obtained. Moreover by the addition of a spot size converter packaging of the PICs becomes feasible. The polarization can be applied to add functionality. For example the performance of a wavelength converter can be optimized using the polarization. Wavelength converters are key components in optical telecommunications networks, but the available devices have several problems. Firstly they need expensive tunable wavelength filters at the output, and secondly they are highly polarization dependent. The application of polarization handling is demonstrated by a new type of integrated wavelength converter: POLARIS (POlarization LAbelling for Rejection and Isolation of Signals). This wavelength converter uses the polarization of the light to label the original and the converted signals. By using a polarization splitter, the two signals can be separated and filtered. This approach can also be used in all-optical switches. In this way tunable filters and polarization dependence are avoided. On-chip polarization manipulation can be used in a number of other circuits as well to enable a broad variety of functions and improvements (for example: polarization independent optical amplifiers, on-chip polarization controller, a laser with a switchable output polarization). To demonstrate the generic integration platform, the development and realization of polarization converters and polarization splitters, together with standard passive (waveguides, couplers) and active (semiconductor optical amplifiers) components is needed. The standard components are designed and a standard fabrication process is developed in which all these components can be integrated. Two generations of polarization converters are realized. The first device has an efficient and short design, but it proved to be difficult to integrate it with active components. A second generation converter is designed, fabricated and characterized. This device is well suited for integration and has a high conversion. Furthermore, two types of polarization splitters are demonstrated. Also these devices need to fit in the standard fabrication. One design is a relatively long device, tolerant to fabrication variations, but leading to complications with integration. A second design is shorter and consists only of a passive Mach Zehnder interferometer with polarization converters in the arms. This splitter fits exactly in the integration scheme, so this is the device of choice for the generic integration technology. Moreover an array of Mach Zehnder Interferometers with SOAs in the arms is designed and fabricated. This circuit can be used in wavelength converters and all-optical switches. The device is integrated with spotsize converters to enable packaging. With the packaged device wavelength conversion up to 40 Gb/s is demonstrated. The POLARIS concept is demonstrated by simulations and experimentally verified. An integrated version of POLARIS is designed. The generic integrated polarization handling technology is demonstrated by realizing this circuit. The realization clearly showed that the integration scheme is useable, because working examples of all relevant components were present on the chip. Unfortunately due to time constraints not all processing steps were sufficiently optimized, leading to a too low yield of working components; therefore no POLARIS operation could be shown with the integrated device. This thesis describes the theory, design, fabrication and characterization of polarization handling components, as well as passive and active components, integrated in InP/InGaAsP. A generic integration technology for Photonic Integrated Circuits is developed. Circuits constructed with the components of this technology can be made polarization insensitive and can have additional functionality based on polarization

IEEE Access Special Section Editorial: Wirelessly Powered Networks, and Technologies

Wireless Power Transfer (WPT) is, by definition, a process that occurs in any system where electrical energy is transmitted from a power source to a load without the connection of electrical conductors. WPT is the driving technology that will enable the next stage in the current consumer electronics revolution, including battery-less sensors, passive RF identification (RFID), passive wireless sensors, the Internet of Things and 5G, and machine-to-machine solutions. WPT-enabled devices can be powered by harvesting energy from the surroundings, including electromagnetic (EM) energy, leading to a new communication networks paradigm, the Wirelessly Powered Networks

HOL(y)Hammer: Online ATP Service for HOL Light

HOL(y)Hammer is an online AI/ATP service for formal (computer-understandable) mathematics encoded in the HOL Light system. The service allows its users to upload and automatically process an arbitrary formal development (project) based on HOL Light, and to attack arbitrary conjectures that use the concepts defined in some of the uploaded projects. For that, the service uses several automated reasoning systems combined with several premise selection methods trained on all the project proofs. The projects that are readily available on the server for such query answering include the recent versions of the Flyspeck, Multivariate Analysis and Complex Analysis libraries. The service runs on a 48-CPU server, currently employing in parallel for each task 7 AI/ATP combinations and 4 decision procedures that contribute to its overall performance. The system is also available for local installation by interested users, who can customize it for their own proof development. An Emacs interface allowing parallel asynchronous queries to the service is also provided. The overall structure of the service is outlined, problems that arise and their solutions are discussed, and an initial account of using the system is given

Progress in analytical methods to predict and control azimuthal combustion instability modes in annular chambers

Longitudinal low-frequency thermoacoustic unstable modes in combustion chambers have been intensively studied experimentally, numerically, and theoretically, leading to significant progress in both understanding and controlling these acoustic modes. However, modern annular gas turbines may also exhibit azimuthal modes, which are much less studied and feature specific mode structures and dynamic behaviors, leading to more complex situations. Moreover, dealing with 10–20 burners mounted in the same chamber limits the use of high fidelity simulations or annular experiments to investigate these modes because of their complexity and costs. Consequently, for such circumferential acoustic modes, theoretical tools have been developed to uncover underlying phenomena controlling their stability, nature, and dynamics. This review presents recent progress in this field. First, Galerkin and network models are described with their pros and cons in both the temporal and frequency framework. Then, key features of such acoustic modes are unveiled, focusing on their specificities such as symmetry breaking, non-linear modal coupling, forcing by turbulence. Finally, recent works on uncertainty quantifications, guided by theoretical studies and applied to annular combustors, are presented. The objective is to provide a global view of theoretical research on azimuthal modes to highlight their complexities and potential

Directly Phase Modulated Transmitters and Coherent Recivers for Future Passive Optical Networks (PON)

En los últimos años, el tráfico de dato transmitido en las redes ópticas de acceso ha crecido exponencialmente debido a nuevos servicios como pueden ser la computación en la nube, el video online, la realidad virtual y aumentada, el internet de las cosas (IoT) y la convergencia entre las redes ópticas y redes inalámbricas en el paradigma del 5G. Estos nuevos servicios endurecen los requerimientos de las redes ópticas de acceso, como pueden ser unas tasas de datos más altas, un mayor alcance y un mayor número de usuarios. Para abordar estos requerimientos, esta tesis ha investigado, desarrollado y analizado nuevas tecnologías para transmisores y receptores orientadas a los dos tipos de redes ópticas de acceso que la comunidad científica ha identificado como posibles candidatas. Estos dos tipos de redes ópticas son las redes uDWDM y las redes TWDM como las redes NG-PON2 y sus evoluciones.Las redes uDWDM están basadas en la transmisión de tasas de datos relativamente bajas, por debajo de 2.5 Gbps, que son dedicadas en su totalidad a los usuarios finales. Estas tasas de datos relativamente bajas son multiplexadas en longitud de onda usando intervalos frecuenciales estrechos, del orden de 12.5 GHz o 6.25 GHz. En esta tesis, los transmisores modulados directamente en fase se han propuesto como posibles candidatos para estas redes uDWDM. En concreto, se han propuesto un DFB modulado directamente en fase con una tasa de datos de 1 Gbps; un RSOA bombeado por un VCSEL y modulado directamente en fase con una tasa de datos de 1 Gbps; y un VCSEL modulado directamente en fase con una tasa de datos de 1.25 Gbps y 2.5 Gbps. Estas señales moduladas directamente en fase son recibidas con un receptor heterodino con un único fotodiodo (PD) para mantener el coste tan bajo como sea posible. La combinación de estos transmisores modulados directamente en fase con el receptor heterodino con un único PD ha sido probada como unos candidatos muy prometedores para las redes ópticas de acceso basadas en redes uDWDM. Estas combinaciones proveen sensibilidades que varían entre -39.5 dBm y -52 dBm, que se traducen en balances de potencia que van desde 38.5 dB a 51 dB y por lo tanto en ratios de división o número de usuarios de entre 128 y 1024 después de una transmisión de 50 km a través de fibra monomodo estándar (SSMF).Además, los links de 1 Gbps formados por la modulación directa de DFBs o de RSOAs bombeados por VCSELs y el receptor heterodino con un único PD son usados como enlace de subida en canales bidireccionales. Estos enlaces de subida son combinados con enlaces de bajada basados en Nyquist-DPSK generada con un MZM y recibidos con un receptor heterodino de un único PD. Como parte de análisis de los canales bidireccionales, se ha analizado el estudio de la viabilidad del uso de LOs de bajo coste, como DFBs o VCSELs, en los receptores heterodinos con un único PD. Estos canales bidireccionales son también unos candidatos prometedores para las futuras redes uDWDM, ya que en esta tesis se ha probado que pueden proveer enlaces full-duplex de 1 Gbps usando intervalos frecuenciales tan pequeños como 6.25 GHz o 5 GHz. Estos canales bidireccionales tienen balances de potencia que van desde 37 dB a 42 dB y tienen posibles ratios de división de 128 o 256 después de una transmisión de 50 km a través de SSMF.Esta tesis también ha investigado y desarrollado receptores quasicoherentes para redes NG-PON2 y sus evoluciones. Este tipo de redes están basadas en altas tasas de datos, como 10 Gbps para redes NG-PON2 y 25 Gbps para las futuras evoluciones de NG-PON2, en entornos multi longitud de onda donde los usuarios son multiplexados en tiempo y longitud de onda (TWDM). El receptor quasicoherente usa la amplificación coherente gracias a la recepción heterodina y por tanto la sensibilidad del receptor es mejorada en comparación con los esquemas de detección directa. El receptor quasicoherente es independiente a la polarización, lo cual es una característica importante para los receptores coherentes. Además, el receptor quasicoherente permite seleccionar el canal de trabajo sin la necesidad de filtros ópticos y es un receptor independiente de la longitud de onda debido a que el canal de trabajo se puede elegir ajustando la longitud de onda del LO. El receptor quasicoherente de 10 Gbps muestra una sensibilidad -35.2 dBm y por tanto permite un balance de potencias de 35.64 dB y un ratio de división de 128 después de una transmisión de 40 km a través de SSMF.La combinación del receptor quasicoherente con un ecualizador FFE/DFE permite combatir la dispersión cromática de la banda C y conseguir un link de 25 Gbps con un alcance de 20 km a través de SSMF. El receptor quasicoherente a 25 Gbps con ecualización FFE/DFE muestra una mejor sensibilidad de -30.5 dBm con el llamado ecualizador de altas prestaciones, lo que lleva a un balance de potencias de25 dB. Si se utilizada el llamado ecualizador de baja complejidad, la sensibilidad cae a -27 dBm y el balance de potencias cae a 23 dBm. En ambos casos, el receptor quasicoherente a 25 Gbps con ecualización FFE/DFE permite un ratio de división de 32 después de una transmisión de 20 km a través de SSMF.En conclusión, esta tesis ha presentado transmisores (DFB, RSOA y VCSEL) modulados directamente en fase combinados con un receptor heterodino con un único PD como potenciales candidatos para las redes uDWDM. Esta tesis también ha presentados los receptores quasicoherentes como unos candidatos muy prometedores para las redes NG-PON2 y sus futuras evoluciones.<br /