Active exoskeleton control systems: State of the art

To get a compliant active exoskeleton controller, the force interaction controllers are mostly used in form of either the impedance or admittance controllers. The impedance or admittance controllers can only work if they are followed by either the force or the position controller respectively. These combinations place the impedance or admittance controller as high-level controller while the force or position controller as low-level controller. From the application point of view, the exoskeleton controllers are equipped by task controllers that can be formed in several ways depend on the aims. This paper presents the review of the control systems in the existing active exoskeleton in the last decade. The exoskeleton control system can be categorized according to the model system, the physical parameters, the hierarchy and the usage. These considerations give different control schemes. The main consideration of exoskeleton control design is how to achieve the best control performances. However, stability and safety are other important issues that have to be considered. © 2012 The Authors

A Fuzzy Logic Architecture for Rehabilitation Robotic Systems

Robots are highly incorporated in rehabilitation in the last decade to compensate lost functions in disabled individuals. By controlling the rehabilitation robots from far, many benefits are achieved. These benefits include but not restricted to minimum hospital stays, decreasing cost, and increasing the level of care. The main goal of this work is to have an effective solution to take care of patients from far. Tackling the problem of the remote control of rehabilitation robots is undergoing and highly challenging. In this paper, a remote wrist rehabilitation system is presented. The developed system is a sophisticated robot ensuring the two wrist movements (Flexion /extension and abduction/adduction). Additionally, the proposed system provides a software interface enabling the physiotherapists to control the rehabilitation process remotely. The patient’s safety during the therapy is achieved through the integration of a fuzzy controller in the system control architecture. The fuzzy controller is employed to control the robot action according to the pain felt by the patient. By using fuzzy logic approach, the system can adapt effectively according to the patients’ conditions. The Queue Telemetry Transport Protocol (MQTT) is considered to overcome the latency during the human robot interaction. Based on a Kinect camera, the control technique is made gestural. The physiotherapist gestures are detected and transmitted to the software interface to be processed and be sent to the robot. The acquired measurements are recorded in a database that can be used later to monitor patient progress during the treatment protocol. The obtained experimental results show the effectiveness of the developed remote rehabilitation system

Human Activity Recognition and Control of Wearable Robots

abstract: Wearable robotics has gained huge popularity in recent years due to its wide applications in rehabilitation, military, and industrial fields. The weakness of the skeletal muscles in the aging population and neurological injuries such as stroke and spinal cord injuries seriously limit the abilities of these individuals to perform daily activities. Therefore, there is an increasing attention in the development of wearable robots to assist the elderly and patients with disabilities for motion assistance and rehabilitation. In military and industrial sectors, wearable robots can increase the productivity of workers and soldiers. It is important for the wearable robots to maintain smooth interaction with the user while evolving in complex environments with minimum effort from the user. Therefore, the recognition of the user's activities such as walking or jogging in real time becomes essential to provide appropriate assistance based on the activity. This dissertation proposes two real-time human activity recognition algorithms intelligent fuzzy inference (IFI) algorithm and Amplitude omega ($A \omega$) algorithm to identify the human activities, i.e., stationary and locomotion activities. The IFI algorithm uses knee angle and ground contact forces (GCFs) measurements from four inertial measurement units (IMUs) and a pair of smart shoes. Whereas, the $A \omega$ algorithm is based on thigh angle measurements from a single IMU. This dissertation also attempts to address the problem of online tuning of virtual impedance for an assistive robot based on real-time gait and activity measurement data to personalize the assistance for different users. An automatic impedance tuning (AIT) approach is presented for a knee assistive device (KAD) in which the IFI algorithm is used for real-time activity measurements. This dissertation also proposes an adaptive oscillator method known as amplitude omega adaptive oscillator ($A\omega AO$) method for HeSA (hip exoskeleton for superior augmentation) to provide bilateral hip assistance during human locomotion activities. The $A \omega$ algorithm is integrated into the adaptive oscillator method to make the approach robust for different locomotion activities. Experiments are performed on healthy subjects to validate the efficacy of the human activities recognition algorithms and control strategies proposed in this dissertation. Both the activity recognition algorithms exhibited higher classification accuracy with less update time. The results of AIT demonstrated that the KAD assistive torque was smoother and EMG signal of Vastus Medialis is reduced, compared to constant impedance and finite state machine approaches. The $A\omega AO$ method showed real-time learning of the locomotion activities signals for three healthy subjects while wearing HeSA. To understand the influence of the assistive devices on the inherent dynamic gait stability of the human, stability analysis is performed. For this, the stability metrics derived from dynamical systems theory are used to evaluate unilateral knee assistance applied to the healthy participants.Dissertation/ThesisDoctoral Dissertation Aerospace Engineering 201

Biomimetic Manipulator Control Design for Bimanual Tasks in the Natural Environment

As robots become more prolific in the human environment, it is important that safe operational procedures are introduced at the same time; typical robot control methods are often very stiff to maintain good positional tracking, but this makes contact (purposeful or accidental) with the robot dangerous. In addition, if robots are to work cooperatively with humans, natural interaction between agents will make tasks easier to perform with less effort and learning time. Stability of the robot is particularly important in this situation, especially as outside forces are likely to affect the manipulator when in a close working environment; for example, a user leaning on the arm, or task-related disturbance at the end-effector. Recent research has discovered the mechanisms of how humans adapt the applied force and impedance during tasks. Studies have been performed to apply this adaptation to robots, with promising results showing an improvement in tracking and effort reduction over other adaptive methods. The basic algorithm is straightforward to implement, and allows the robot to be compliant most of the time and only stiff when required by the task. This allows the robot to work in an environment close to humans, but also suggests that it could create a natural work interaction with a human. In addition, no force sensor is needed, which means the algorithm can be implemented on almost any robot. This work develops a stable control method for bimanual robot tasks, which could also be applied to robot-human interactive tasks. A dynamic model of the Baxter robot is created and verified, which is then used for controller simulations. The biomimetic control algorithm forms the basis of the controller, which is developed into a hybrid control system to improve both task-space and joint-space control when the manipulator is disturbed in the natural environment. Fuzzy systems are implemented to remove the need for repetitive and time consuming parameter tuning, and also allows the controller to actively improve performance during the task. Experimental simulations are performed, and demonstrate how the hybrid task/joint-space controller performs better than either of the component parts under the same conditions. The fuzzy tuning method is then applied to the hybrid controller, which is shown to slightly improve performance as well as automating the gain tuning process. In summary, a novel biomimetic hybrid controller is presented, with a fuzzy mechanism to avoid the gain tuning process, finalised with a demonstration of task-suitability in a bimanual-type situation.EPSR

An Industrial Robot-Based Rehabilitation System for Bilateral Exercises

Robot-assisted rehabilitation devices can provide intensive and precise task-based training that differs from clinician-facilitated manual therapy. However, industrial robots are still rarely used in rehabilitation, especially in bilateral exercises. The main purpose of this research is to develop and evaluate the functionality of a bilateral upper-limb rehabilitation system based on two modern industrial robots. A `patient-cooperative' control strategy is developed based on an adaptive admittance controller, which can take into account patients' voluntary efforts. Three bilateral training protocols (passive, active, and self) are also proposed based on the system and the control strategy. Experimental results from 10 healthy subjects show that the proposed system can provide reliable bilateral exercises: the mean RMS values for the master error and the master-slave error are all less than 1.00 mm and 1.15 mm respectively, and the mean max absolute values for the master error and the master-slave error are no greater than 6.11 mm and 6.73 mm respectively. Meanwhile, the experimental results also confirm that the recalculated desired trajectory can present the voluntary efforts of subjects. These experimental findings suggest that industrial robots can be used in bilateral rehabilitation training, and also highlight the potential applications of the proposed system in further clinical practices

Active interaction control applied to a lower limb rehabilitation robot by using EMG recognition and impedance model

Purpose – The purpose of this paper is to propose a seamless active interaction control method integrating electromyography (EMG)-triggered assistance and the adaptive impedance control scheme for parallel robot-assisted lower limb rehabilitation and training. Design/methodology/approach – An active interaction control strategy based on EMG motion recognition and adaptive impedance model is implemented on a six-degrees of freedom parallel robot for lower limb rehabilitation. The autoregressive coefficients of EMG signals integrating with a support vector machine classifier are utilized to predict the movement intention and trigger the robot assistance. An adaptive impedance controller is adopted to influence the robot velocity during the exercise, and in the meantime, the user’s muscle activity level is evaluated online and the robot impedance is adapted in accordance with the recovery conditions. Findings – Experiments on healthy subjects demonstrated that the proposed method was able to drive the robot according to the user’s intention, and the robot impedance can be updated with the muscle conditions. Within the movement sessions, there was a distinct increase in the muscle activity levels for all subjects with the active mode in comparison to the EMG-triggered mode. Originality/value – Both users’ movement intention and voluntary participation are considered, not only triggering the robot when people attempt to move but also changing the robot movement in accordance with user’s efforts. The impedance model here responds directly to velocity changes, and thus allows the exercise along a physiological trajectory. Moreover, the muscle activity level depends on both the normalized EMG signals and the weight coefficients of involved muscles

Admittance-based controller design for physical human-robot interaction in the constrained task space

In this article, an admittance-based controller for physical human-robot interaction (pHRI) is presented to perform the coordinated operation in the constrained task space. An admittance model and a soft saturation function are employed to generate a differentiable reference trajectory to ensure that the end-effector motion of the manipulator complies with the human operation and avoids collision with surroundings. Then, an adaptive neural network (NN) controller involving integral barrier Lyapunov function (IBLF) is designed to deal with tracking issues. Meanwhile, the controller can guarantee the end-effector of the manipulator limited in the constrained task space. A learning method based on the radial basis function NN (RBFNN) is involved in controller design to compensate for the dynamic uncertainties and improve tracking performance. The IBLF method is provided to prevent violations of the constrained task space. We prove that all states of the closed-loop system are semiglobally uniformly ultimately bounded (SGUUB) by utilizing the Lyapunov stability principles. At last, the effectiveness of the proposed algorithm is verified on a Baxter robot experiment platform. Note to Practitioners-This work is motivated by the neglect of safety in existing controller design in physical human-robot interaction (pHRI), which exists in industry and services, such as assembly and medical care. It is considerably required in the controller design for rigorously handling constraints. Therefore, in this article, we propose a novel admittance-based human-robot interaction controller. The developed controller has the following functionalities: 1) ensuring reference trajectory remaining in the constrained task space: A differentiable reference trajectory is shaped by the desired admittance model and a soft saturation function; 2) solving uncertainties of robotic dynamics: A learning approach based on radial basis function neural network (RBFNN) is involved in controller design; and 3) ensuring the end-effector of the manipulator remaining in the constrained task space: different from other barrier Lyapunov function (BLF), integral BLF (IBLF) is proposed to constrain system output directly rather than tracking error, which may be more convenient for controller designers. The controller can be potentially applied in many areas. First, it can be used in the rehabilitation robot to avoid injuring the patient by limiting the motion. Second, it can ensure the end-effector of the industrial manipulator in a prescribed task region. In some industrial tasks, dangerous or damageable tools are mounted on the end-effector, and it will hurt humans and bring damage to the robot when the end-effector is out of the prescribed task region. Third, it may bring a new idea to the designed controller for avoiding collisions in pHRI when collisions occur in the prescribed trajectory of end-effector

An EMG-based force prediction and control approach for robot-assisted lower limb rehabilitation

This paper proposes an electromyography (EMG)-based method for online force prediction and control of a lower limb rehabilitation robot. Root mean square (RMS) features of EMG signals from four muscles of the lower limb are used as the inputs to a support vector regression (SVR) model to estimate the human-robot interaction force. The autoregressive algorithm is utilized to construct the relationship between EMG signals and the impact force. Combining the force prediction model with the position-based impedance controller, the robot can be controlled to track the desired force of the lower limb, and so as to achieve an adaptive and active rehabilitation mode, which is adaptable to the individual muscle strength and movement ability. Finally, the method was validated through experiments on a healthy subject. The results show that the EMG-based SVR model can predict the lower limb force accurately and the robot can be controlled to track the estimated force by using simplified impedance model

An EMG-based force prediction and control approach for robot-assisted lower limb rehabilitation

This paper proposes an electromyography (EMG)-based method for online force prediction and control of a lower limb rehabilitation robot. Root mean square (RMS) features of EMG signals from four muscles of the lower limb are used as the inputs to a support vector regression (SVR) model to estimate the human-robot interaction force. The autoregressive algorithm is utilized to construct the relationship between EMG signals and the impact force. Combining the force prediction model with the position-based impedance controller, the robot can be controlled to track the desired force of the lower limb, and so as to achieve an adaptive and active rehabilitation mode, which is adaptable to the individual muscle strength and movement ability. Finally, the method was validated through experiments on a healthy subject. The results show that the EMG-based SVR model can predict the lower limb force accurately and the robot can be controlled to track the estimated force by using simplified impedance model

Robot Impedance Control and Passivity Analysis with Inner Torque and Velocity Feedback Loops

Impedance control is a well-established technique to control interaction forces in robotics. However, real implementations of impedance control with an inner loop may suffer from several limitations. Although common practice in designing nested control systems is to maximize the bandwidth of the inner loop to improve tracking performance, it may not be the most suitable approach when a certain range of impedance parameters has to be rendered. In particular, it turns out that the viable range of stable stiffness and damping values can be strongly affected by the bandwidth of the inner control loops (e.g. a torque loop) as well as by the filtering and sampling frequency. This paper provides an extensive analysis on how these aspects influence the stability region of impedance parameters as well as the passivity of the system. This will be supported by both simulations and experimental data. Moreover, a methodology for designing joint impedance controllers based on an inner torque loop and a positive velocity feedback loop will be presented. The goal of the velocity feedback is to increase (given the constraints to preserve stability) the bandwidth of the torque loop without the need of a complex controller.Comment: 14 pages in Control Theory and Technology (2016