1,811 research outputs found
OUTPUT BASED INPUT SHAPING FOR OPTIMAL CONTROL OF SINGLE LINK FLEXIBLE MANIPULATOR
Endpoint residual vibrations and oscillations due to flexible and rigid body motions are big challenges in control of single link flexible manipulators, it makes positioning of payload difficult especially when using various payloads. This paper present output based input shaping with two different control algorithms for optimal control of single link flexible manipulators. Output based filter (OBF) is designed using the signal output of the system and then incorporated with both linear quadratic regulator (LQR) and PID separately for position and residual vibration control. The Robustness of these control algorithms are tested by changing the payloads from 0g to30g, 50g and 70g in each case. Based on MATLAB simulation results and time response analysis, LQR-OBF outperformed the PID-OBF in both tracking and vibration reduction
Deformation Control in Rest-to-Rest Motion of Mechanisms with Flexible Links
This paper develops and validates experimentally a feedback strategy for the reduction of the link deformations in rest-to-rest motion of mechanisms with flexible links, named Delayed Reference Control (DRC). The technique takes advantage of the inertial coupling between rigid-bodymotion and elasticmotion to control the undesired link deformations by shifting in time the position reference through an action reference parameter. The action reference parameter is computed on the fly based on the sensed strains by solving analytically an optimization problem. An outer control loop is closed to compute the references for the position controllers of each actuator, which can be thought of as the inner control loop. The resulting multiloop architecture of the DRC is a relevant advantage over several traditional feedback controllers: DRC can be implemented by just adding an outer control loop to standard position controllers. A validation of the proposed control strategy is provided by applying the DRC to the real-time control of a four-bar linkage
Modeling and Control of Flexible Link Manipulators
Autonomous maritime navigation and offshore operations have gained wide attention with the aim of reducing operational costs and increasing reliability and safety. Offshore operations, such as wind farm inspection, sea farm cleaning, and ship mooring, could be carried out autonomously or semi-autonomously by mounting one or more long-reach robots on the ship/vessel. In addition to offshore applications, long-reach manipulators can be used in many other engineering applications such as construction automation, aerospace industry, and space research. Some applications require the design of long and slender mechanical structures, which possess some degrees of flexibility and deflections because of the material used and the length of the links. The link elasticity causes deflection leading to problems in precise position control of the end-effector. So, it is necessary to compensate for the deflection of the long-reach arm to fully utilize the long-reach lightweight flexible manipulators.
This thesis aims at presenting a unified understanding of modeling, control, and application of long-reach flexible manipulators. State-of-the-art dynamic modeling techniques and control schemes of the flexible link manipulators (FLMs) are discussed along with their merits, limitations, and challenges. The kinematics and dynamics of a planar multi-link flexible manipulator are presented. The effects of robot configuration and payload on the mode shapes and eigenfrequencies of the flexible links are discussed. A method to estimate and compensate for the static deflection of the multi-link flexible manipulators under gravity is proposed and experimentally validated. The redundant degree of freedom of the planar multi-link flexible manipulator is exploited to minimize vibrations. The application of a long-reach arm in autonomous mooring operation based on sensor fusion using camera and light detection and ranging (LiDAR) data is proposed.publishedVersio
Data-driven mode shape selection and model-based vibration suppression of 3-RRR parallel manipulator with flexible actuation links
The mode shape function is difficult to determine in modeling manipulators
with flexible links using the assumed mode method. In this paper, for a planar
3-RRR parallel manipulator with flexible actuation links, we provide a
data-driven method to identify the mode shape of the flexible links and propose
a model-based controller for the vibration suppression. By deriving the inverse
kinematics of the studied mechanism in analytical form, the dynamic model is
established by using the assumed mode method. To select the mode shape
function, the software of multi-body system dynamics is used to simulate the
dynamic behavior of the mechanism, and then the data-driven method which
combines the DMD and SINDy algorithms is employed to identify the reasonable
mode shape functions for the flexible links. To suppress the vibration of the
flexible links, a state observer for the end-effector is constructed by a
neural network, and the model-based control law is designed on this basis. In
comparison with the model-free controller, the proposed controller with
developed dynamic model has promising performance in terms of tracking accuracy
and vibration suppression
Dynamic analysis and control system design of a deployable space robotic manipulator
This thesis presents a dynamic analysis and a control system for a flexible space
manipulator, the Deployable Robotic Manipulator or DRM, which has a
deployable/retractable link. The link extends (or retracts) from the containing slewing
link of the manipulator to change the DRM's length and hence its workspace. This
makes the system dynamics time varying and therefore any control strategy has to adapt
to this fact. The aim of the control system developed is to slew the manipulator through
a predetermined angle given a maximum angular acceleration, to reduce flexural
vibrations of the manipulator and to have a certain degree of robustness, all of this while
carrying a payload and while the length of the manipulator is changing. The control
system consists of a slewing motor that rotates the manipulator using the open-loop
assumed torque method and two reaction wheel actuators, one at the base and one at the
tip of the manipulator, which are driven by a closed-loop damping control law. Two
closed-loop control laws are developed, a linear control law and a Lyapunov based
control law. The linear control law is based on collocated output feedback. The
Lyapunov control law is developed for each of the actuators using Lyapunov stability
theory to produce vibration control that can achieve the objectives stated above for
different payloads, while the manipulator is rotating and deploying or retracting. The
response of the system is investigated by computer simulation for two-dimensional
vibrations of the deployable manipulator. Both the linear and Lyapunov based feedback
control laws are found to eliminate vibrations for a range of payloads, and to increase the
robustness of the slewing mechanism to deal with uncertain payload characteristics
Dynamics and Control of Smart Structures for Space Applications
Smart materials are one of the key emerging technologies for a variety of space systems ranging in their applications from instrumentation to structural design. The underlying principle of smart materials is that they are materials that can change their properties based on an input, typically a voltage or current. When these materials are incorporated into structures, they create smart structures. This work is concerned with the dynamics and control of three smart structures: a membrane structure with shape memory alloys for control of the membrane surface flatness, a flexible manipulator with a collocated piezoelectric sensor/actuator pair for active vibration control, and a piezoelectric nanopositioner for control of instrumentation.
Shape memory alloys are used to control the surface flatness of a prototype membrane structure. As these actuators exhibit a hysteretic nonlinearity, they need their own controller to operate as required. The membrane structures surface flatness is then controlled by the shape memory alloys, and two techniques are developed: genetic algorithm and proportional-integral controllers. This would represent the removal of one of the main obstacles preventing the use of membrane structures in space for high precision applications, such as a C-band synthetic aperture radar antenna.
Next, an adaptive positive position feedback law is developed for control of a structure with a collocated piezoelectric sensor/actuator pair, with unknown natural frequencies. This control law is then combined with the input shaping technique for slew maneuvers of a single-link flexible manipulator. As an alternative to the adaptive positive position feedback law, genetic algorithms are investigated as both system identification techniques and as a tool for optimal controller design in vibration suppression. These controllers are all verified through both simulation and experiments.
The third area of investigation is on the nonlinear dynamics and control of piezoelectric actuators for nanopositioning applications. A state feedback integral plus double integral synchronization controller is designed to allow the piezoelectrics to form the basis of an ultra-precise 2-D Fabry-Perot interferometer as the gap spacing of the device could be controlled at the nanometer level. Next, an output feedback linear integral control law is examined explicitly for the piezoelectric actuators with its nonlinear behaviour modeled as an input nonlinearity to a linear system. Conditions for asymptotic stability are established and then the analysis is extended to the derivation of an output feedback integral synchronization controller that guarantees global asymptotic stability under input nonlinearities. Experiments are then performed to validate the analysis.
In this work, the dynamics and control of these smart structures are addressed in the context of their three applications. The main objective of this work is to develop effective and reliable control strategies for smart structures that broaden their applicability to space systems
Advanced Strategies for Robot Manipulators
Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored
Dynamic modeling, property investigation, and adaptive controller design of serial robotic manipulators modeled with structural compliance
Research results on general serial robotic manipulators modeled with structural compliances are presented. Two compliant manipulator modeling approaches, distributed and lumped parameter models, are used in this study. System dynamic equations for both compliant models are derived by using the first and second order influence coefficients. Also, the properties of compliant manipulator system dynamics are investigated. One of the properties, which is defined as inaccessibility of vibratory modes, is shown to display a distinct character associated with compliant manipulators. This property indicates the impact of robot geometry on the control of structural oscillations. Example studies are provided to illustrate the physical interpretation of inaccessibility of vibratory modes. Two types of controllers are designed for compliant manipulators modeled by either lumped or distributed parameter techniques. In order to maintain the generality of the results, neither linearization is introduced. Example simulations are given to demonstrate the controller performance. The second type controller is also built for general serial robot arms and is adaptive in nature which can estimate uncertain payload parameters on-line and simultaneously maintain trajectory tracking properties. The relation between manipulator motion tracking capability and convergence of parameter estimation properties is discussed through example case studies. The effect of control input update delays on adaptive controller performance is also studied
Dynamics and Control of Flexible Composite Robotic Manipulators Based on Finite Element Method
The robotic manipulator is a device to carry out the various tasks according to the requirements without any human intervention. Vibration analysis of flexible manipulators has been an important area of research in order to model and control of such systems. In the present analysis, the Timoshenko beam theory based single and double link flexible manipulators made up of advanced composite material have been analyzed using finite element method. A three noded beam element has been implemented for modelling and analysis of the flexible composite manipulators under different input torques. The effects of hybridization of the different composite materials on the positions and residuals of the end effectors have also been studied. The input shaping has also been carried out in order to reduce the residual vibration of the end effector by adjusting the amplitude and time delay. The influences of the taper angles of the tapered flexible composite manipulators on the end effector movement and vibration have also been presented. The linear quadratic regulator control (LQR) scheme has been applied in order to further reduce the residual vibration of the end effector. Various results have been obtained based on the different analyses. The results reveal that the tapered hollow flexible composite manipulators give the better performances in terms of end effector positions and residual vibration. The obtained results based on the LQR control scheme show that residual vibration can be controlled without compromising the end effector movement
- …