125 research outputs found

    Constructive interconnection and damping assignment passivity-based control with applications

    No full text
    Energy-based modeling and control of dynamical systems is crucial since energy is a fundamental concept in Science and Engineering theory and practice. While Interconnection and Damping Assignment Passivity-based Control (IDA-PBC) is a powerful theoretical tool to control port-controlled Hamiltonian (PCH) systems that arise from energy balancing principles, sensorless operation of energy harvesters is a promising practical solution for low-power energy generation. The thesis addresses these two problems of energy-based control and efficient energy generation. The design via IDA-PBC hinges on the solution of the so-called matching equation which is the stumbling block in making this method widely applicable. In the first part of the thesis, a constructive approach for IDA-PBC for PCH systems that circumvents the solution of the matching equation is presented. A new notion of solution for the matching equation, called algebraic solution, is introduced. This notion is instrumental for the construction of an energy function defined on an extended state-space. This yields, differently from the classical solution, a dynamic state-feedback that stabilizes a desired equilibrium point. In addition, conditions that preserve the PCH structure in the extended closed-loop system have been provided. The theory is validated on four examples: a two-dimensional nonlinear system, a magnetic levitated ball, an electrostatic microactuator and a third order food-chain system. For these systems damping structures that cannot be imposed with the standard approach are assigned. In the second part of the thesis, the design of a nonlinear observer and of an energy-based controller for sensorless operation of a rotational energy harvester is presented. A mathematical model of the harvester with its power electronic interface is developed. This model is used to design an observer that estimates the mechanical quantities from the measured electrical quantities. The gains of the observer depend on the solution of a modified Riccati equation. The estimated mechanical quantities are used in a feedback control law that sustains energy generation across a range of source rotation speeds. The proposed observer-controller scheme is assessed through simulations and experiments.Open Acces

    Generalized Scattering-Based Stabilization of Nonlinear Interconnected Systems

    Get PDF
    The research presented in this thesis is aimed at development of new methods and techniques for stability analysis and stabilization of interconnections of nonlinear systems, in particular, in the presence of communication delays. Based on the conic systems\u27 formalism, we extend the notion of conicity for the non-planar case where the dimension of the cone\u27s central subspace may be greater than one. One of the advantages of the notion of non-planar conicity is that any dissipative system with a quadratic supply rate can be represented as a non-planar conic system; specifically, its central subspace and radius can be calculated using an algorithm developed in this thesis. For a feedback interconnection of two non-planar conic systems, a graph separation condition for finite-gain L2-stability is established in terms of central subspaces and radii of the subsystems\u27 non-planar cones. Subsequently, a generalized version of the scattering transformation is developed which is applicable to non-planar conic systems. The transformation allows for rendering the dynamics of a non-planar conic system into a prescribed cone with compatible dimensions; the corresponding design algorithm is presented. The ability of the generalized scattering transformation to change the parameters of a system\u27s cone can be used for stabilization of interconnections of non-planar conic systems. For interconnections without communication delays, stabilization is achieved through the design of a scattering transformation that guarantees the fulfilment of the graph separation stability condition. For interconnected systems with communication delays, scattering transformations are designed on both sides of communication channel in a way that guarantees the overall stability through fulfilment of the small gain stability condition. Application to stabilization of bilateral teleoperators with multiple heterogeneous communication delays is briefly discussed. Next, the coupled stability problem is addressed based on the proposed scattering based stabilization techniques. The coupled stability problem is one of the most fundamental problems in robotics. It requires to guarantee stability of a controlled manipulator in contact with an environment whose dynamics are unknown, or at least not known precisely. We present a scattering-based design procedure that guarantees coupled stability while at the same time does not affect the robot\u27s trajectory tracking performance in free space. A detailed design example is presented that demonstrates the capabilities of the scattering-based design approach, as well as its advantages in comparison with more conventional passivity-based approaches. Finally, the generalized scattering-based technique is applied to the problem of stabilization of complex interconnections of dissipative systems with quadratic supply rates in the presence of multiple heterogeneous constant time delays. Our approach is to design local scattering transformations that guarantee the fulfilment of a multi-dimensional small-gain stability condition for the interconnected system. A numerical example is presented that illustrates the capabilities of the proposed design method

    Stabilization of cascaded nonlinear systems under sampling and delays

    Get PDF
    Over the last decades, the methodologies of dynamical systems and control theory have been playing an increasingly relevant role in a lot of situations of practical interest. Though, a lot of theoretical problem still remain unsolved. Among all, the ones concerning stability and stabilization are of paramount importance. In order to stabilize a physical (or not) system, it is necessary to acquire and interpret heterogeneous information on its behavior in order to correctly intervene on it. In general, those information are not available through a continuous flow but are provided in a synchronous or asynchronous way. This issue has to be unavoidably taken into account for the design of the control action. In a very natural way, all those heterogeneities define an hybrid system characterized by both continuous and discrete dynamics. This thesis is contextualized in this framework and aimed at proposing new methodologies for the stabilization of sampled-data nonlinear systems with focus toward the stabilization of cascade dynamics. In doing so, we shall propose a small number of tools for constructing sampled-data feedback laws stabilizing the origin of sampled-data nonlinear systems admitting cascade interconnection representations. To this end, we shall investigate on the effect of sampling on the properties of the continuous-time system while enhancing design procedures requiring no extra assumptions over the sampled-data equivalent model. Finally, we shall show the way sampling positively affects nonlinear retarded dynamics affected by a fixed and known time-delay over the input signal by enforcing on the implicit cascade representation the sampling process induces onto the retarded system

    Simultaneous Position-and-Stiffness Control of Underactuated Antagonistic Tendon-Driven Continuum Robots

    Full text link
    Continuum robots have gained widespread popularity due to their inherent compliance and flexibility, particularly their adjustable levels of stiffness for various application scenarios. Despite efforts to dynamic modeling and control synthesis over the past decade, few studies have focused on incorporating stiffness regulation in their feedback control design; however, this is one of the initial motivations to develop continuum robots. This paper aims to address the crucial challenge of controlling both the position and stiffness of a class of highly underactuated continuum robots that are actuated by antagonistic tendons. To this end, the first step involves presenting a high-dimensional rigid-link dynamical model that can analyze the open-loop stiffening of tendon-driven continuum robots. Based on this model, we propose a novel passivity-based position-and-stiffness controller adheres to the non-negative tension constraint. To demonstrate the effectiveness of our approach, we tested the theoretical results on our continuum robot, and the experimental results show the efficacy and precise performance of the proposed methodology

    On Observer-Based Control of Nonlinear Systems

    Get PDF
    Filtering and reconstruction of signals play a fundamental role in modern signal processing, telecommunications, and control theory and are used in numerous applications. The feedback principle is an important concept in control theory. Many different control strategies are based on the assumption that all internal states of the control object are available for feedback. In most cases, however, only a few of the states or some functions of the states can be measured. This circumstance raises the need for techniques, which makes it possible not only to estimate states, but also to derive control laws that guarantee stability when using the estimated states instead of the true ones. For linear systems, the separation principle assures stability for the use of converging state estimates in a stabilizing state feedback control law. In general, however, the combination of separately designed state observers and state feedback controllers does not preserve performance, robustness, or even stability of each of the separate designs. In this thesis, the problems of observer design and observer-based control for nonlinear systems are addressed. The deterministic continuous-time systems have been in focus. Stability analysis related to the Positive Real Lemma with relevance for output feedback control is presented. Separation results for a class of nonholonomic nonlinear systems, where the combination of independently designed observers and state-feedback controllers assures stability in the output tracking problem are shown. In addition, a generalization to the observer-backstepping method where the controller is designed with respect to estimated states, taking into account the effects of the estimation errors, is presented. Velocity observers with application to ship dynamics and mechanical manipulators are also presented

    Positioning control and port-Hamiltonian based model for compound eyes microscopy

    Get PDF
    Trabajo Final de Graduación (Licenciatura en Ingeniería en Mecatrónica) Instituto Tecnológico de Costa Rica, Área Académica de Ingeniería en Mecatrónica, 2019El aparato goniométrico robótico para ojos compuestos (GRACE) de la Universidad de Groningen requiere un sistema de posicionamiento preciso para el uso de un telemicroscopio con el objetivo de analizar los ojos compuestos de insectos y su caracterización. En esta tesis el lector puede obtener información sobre la creación de este sistema, el cual incluye el diseño del circuito, identi cación del sistema, creación de la interfaz gra ca y diseño del control del motor CD facilitado para esta tarea.The Goniometric Robotic Apparatus for Compound Eyes (GRACE) at the University of Groningen requires a precise positioning system to use a telemicroscope with the goal of analyzing and characterizing the compound eyes of insects. In this thesis the reader can obtain information regarding the creation of this system, this includes the circuit design, the system identi cation, the graphic user interface, and the control design for the DC motor given to accomplish this task

    Eingangsadmittanz-Modellierung und passivitätsbasierte Stabilisierung von digital-stromgeregelten, netzgebundenen Umrichtern

    Get PDF
    Due to the ever increasing number of renewable energy systems in the electrical power grid, the application of power electronic-based circuits is gaining more and more importance. It has however been known for a while that interactions of one or multiple converters with resonances in the grid can lead to poorly damped oscillations, and thus, may threaten the stability of parts of the power system. The passivity theory has proven to be particularly powerful in preventing such situations. Accordingly, the stability of the power grid can be guaranteed by design if all components act passive. This means that all active loads and energy feeding converters have an input admittance with a non-negative real part. This can theoretically be achieved using passive or active damping strategies, but most research neglects real-world effects, which arise from the sampling of high-frequency switching harmonics. The aim of this dissertation is therefore to review the complete modeling and analysis of digitally current-controlled grid-connected converters and to extend the controller as well as filter design. On the basis of typical single-input single-output models of the converter’s input admittance, methods for the design of a passive damping or an active feed-forward are proposed and it is discussed which aspects have to be considered when implementing the filters. However, since the used models cannot reproduce all alias effects, in the further part of the thesis a multiple-input multiple-output converter model is developed. It is shown that the mirroring of high-frequency signal components onto low-frequency components can in principle be described by a dynamic uncertainty that affects the behavior of the converters' baseband dynamics. Due to this new insight it becomes clear which criteria passive or active filters should fulfill in order to specifically counteract the often negative mirroring effects of digital control. Finally, it is demonstrated that a robust passivation of the converter input admittance can prevent a destabilization of the power system by harmonics for a large number of grid impedances. The presented theory and the developed controller design are illustrated and verified by various simulations of an exemplary converter system.Aufgrund der immer größer werdenden Anzahl von erneuerbaren Energieanlagen im elektrischen Energieversorgungsnetz gewinnt der Einsatz von leistungselektronischen Schaltungen immer mehr an Bedeutung. Es ist jedoch seit längerem bekannt, dass Wechselwirkungen von einem oder mehreren Umrichtern mit Resonanzen im Netz zu schlecht gedämpften Schwingungen führen und damit die Stabilität von Teilen des Energienetzes gefährden können. Die Passivitätstheorie hat sich als besonders wirkungsvoll erwiesen, um solche Situationen zu verhindern. Demnach kann die Stabilität des Stromnetzes bereits in der Designphase gewährleistet werden, indem alle Komponenten passiv wirken. Das bedeutet, dass alle aktiven Verbraucher und einspeisenden Umrichter eine Eingangsadmittanz mit nicht negativem Realteil besitzen. Dies ist theoretisch mit Hilfe von passiven oder aktiven Dämpfungsstrategien zu erreichen. Die meisten Forschungsarbeiten vernachlässigen jedoch reale Effekte, die bei der Abtastung von hochfrequenten Harmonischen entstehen. Ziel dieser Dissertation ist es daher, den kompletten Modellierungs-, Analyse- und Regler- sowie Filterentwurfsprozess von digital-stromgeregelten, netzgebundenen Umrichtern zu überprüfen und zu erweitern. Auf der Basis typischer Eingrößenmodelle der Umrichter-Eingangsadmittanz werden Verfahren für die Auslegung einer passiven Dämpfung bzw. einer aktiven Vorsteuerung vorgeschlagen und es wird diskutiert, welche Aspekte bei der Implementierung der Filter zu berücksichtigen sind. Da sich mit den Modellen jedoch nicht alle Alias-Effekte abbilden lassen, wird im weiteren Teil der Arbeit ein Mehrgrößen-Umrichtermodell entwickelt. Es zeigt sich, dass die Spiegelung hochfrequenter Signalanteile auf niederfrequente Anteile prinzipiell durch eine dynamische Unsicherheit beschrieben werden kann, die das Grundfrequenzverhalten der Umrichter beeinflusst. Dank dieser neuen Erkenntnisse wird deutlich, welche Kriterien passive oder aktive Filter erfüllen sollten, um den oft negativen Spiegeleffekten der digitalen Regelung gezielt entgegenzuwirken. Es wird demonstriert, dass eine robuste Passivierung der Umrichter-Eingangsadmittanz eine Destabilisierung des Energienetzes durch Harmonische für eine Vielzahl von Netzimpedanzen verhindern kann. Die vorgestellte Theorie und der erarbeitete Reglerentwurf werden anhand diverser Simulationen eines beispielhaften Umrichtersystems verdeutlicht und validiert
    corecore