A Review of Cooperative Actuator and Sensor Systems Based on Dielectric Elastomer Transducers

This paper presents an overview of cooperative actuator and sensor systems based on dielectric elastomer (DE) transducers. A DE consists of a flexible capacitor made of a thin layer of soft dielectric material (e.g., acrylic, silicone) surrounded with a compliant electrode, which is able to work as an actuator or as a sensor. Features such as large deformation, high compliance, flexibility, energy efficiency, lightweight, self-sensing, and low cost make DE technology particularly attractive for the realization of mechatronic systems that are capable of performance not achievable with alternative technologies. If several DEs are arranged in an array-like configuration, new concepts of cooperative actuator/sensor systems can be enabled, in which novel applications and features are made possible by the synergistic operations among nearby elements. The goal of this paper is to review recent advances in the area of cooperative DE systems technology. After summarizing the basic operating principle of DE transducers, several applications of cooperative DE actuators and sensors from the recent literature are discussed, ranging from haptic interfaces and bio-inspired robots to micro-scale devices and tactile sensors. Finally, challenges and perspectives for the future development of cooperative DE systems are discussed

Digital Clay: User Interaction Model for Control of a Fluidically Actuated Haptics Device

To be presented at Sim2003, 1st International Conference on Computational Methods in Fluid Power Technology, November 26-28, 2003, Melbourne, Australia.Digital Clay is a novel haptics device the purpose which is to form a continuously variable surface that can be used to display shape data or accept shape input. It will be composed of a large number of small fluidic actuators and an array of MEMS micro-valves. Teams are investigating the kinematic architecture, the human interface, the control, the fluidics, and the valve design for this device. This paper describes the development of a computer model to simulate the device as well as human interaction with it via a simulated fmgertip. The model is developed for a conceptual architecture design that could be used in a future prototype wherein the surface is defined by a close-packed array of slender fluidic actuators, however other architectures are also discussed. A key element of controlling this device will be interpreting user input. Therefore the simulations presented attempt to validate algorithms for tracking the user's finger and producing variable height bosses and creases in the surface

A Characterization of Actuation Techniques for Generating Movement in Shape-Changing Interfaces

Abstract This article characterizes actuation techniques for generating movement in shape-changing displays with physically reconfigurable geometry. To date, few works in Human Computer Interaction literature provide detailed and reflective descriptions of the implementation techniques used in shape-changing displays. This hinders the rapid development of novel interactions as researchers must initially spend time understanding technologies before prototyping new interactions and applications. To bridge this knowledge gap, we propose a taxonomy that classifies actuator characteristics and simplifies the process for designers to select appropriate technologies that match their requirements for developing shape-displays. We scope our investigation to linear actuators that are used in grid configurations. The taxonomy is validated by (a) examining current implementation techniques of motorized, pneumatic, hydraulic, magnetic, and shape-memory actuators in the literature, (b) constructing prototypes to address limited technical details and explore actuator capabilities in depth, (c) describing a use-case scenario through a case study that details the construction of a 10 ? 10 actuator shape-display, and (d) a set of guidelines to aid researchers in selecting actuation techniques for shape-changing applications. The significance of our taxonomy is twofold. First, we provide an original contribution that enables HCI researchers to appropriately select actuation techniques and build shape-changing applications. This is situated amongst other past works that have investigated broader application scenarios such as a shape-changing vocabulary, a framework for shape transformations, material properties, and technical characteristics of various actuators. Second, we carry out in-depth investigations to validate our taxonomy and expand the knowledge of vertical actuation in shape-changing applications to enable rapid development

A reconfigurable tactile display based on polymer MEMS technology

This research focuses on the development of polymer microfabrication technologies for the realization of two major components of a pneumatic tactile display: a microactuator array and a complementary microvalve (control) array. The concept, fabrication, and characterization of a kinematically-stabilized polymeric microbubble actuator (¡°endoskeletal microbubble actuator¡±) were presented. A systematic design and modeling procedure was carried out to generate an optimized geometry of the corrugated diaphragm to satisfy membrane deflection, force, and stability requirements set forth by the tactile display goals. A refreshable Braille cell as a tactile display prototype has been developed based on a 2x3 endoskeletal microbubble array and an array of commercial valves. The prototype can provide both a static display (which meets the displacement and force requirement of a Braille display) and vibratory tactile sensations. Along with the above capabilities, the device was designed to meet the criteria of lightness and compactness to permit portable operation. The design is scalable with respect to the number of tactile actuators while still being simple to fabricate. In order to further reduce the size and cost of the tactile display, a microvalve array can be integrated into the tactile display system to control the pneumatic fluid that actuates the microbubble actuator. A piezoelectrically-driven and hydraulically-amplified polymer microvalve has been designed, fabricated, and tested. An incompressible elastomer was used as a solid hydraulic medium to convert the small axial displacement of a piezoelectric actuator into a large valve head stroke while maintaining a large blocking force. The function of the microvalve as an on-off switch for a pneumatic microbubble tactile actuator was demonstrated. To further reduce the cost of the microvalve, a laterally-stacked multilayer PZT actuator has been fabricated using diced PZT multilayer, high aspect ratio SU-8 photolithography, and molding of electrically conductive polymer composite electrodes.Ph.D.Committee Chair: Allen,Mark; Committee Member: Bucknall,David; Committee Member: Book,Wayne; Committee Member: Griffin,Anselm; Committee Member: Yao,Donggan

Haptics Rendering and Applications

There has been significant progress in haptic technologies but the incorporation of haptics into virtual environments is still in its infancy. A wide range of the new society's human activities including communication, education, art, entertainment, commerce and science would forever change if we learned how to capture, manipulate and reproduce haptic sensory stimuli that are nearly indistinguishable from reality. For the field to move forward, many commercial and technological barriers need to be overcome. By rendering how objects feel through haptic technology, we communicate information that might reflect a desire to speak a physically- based language that has never been explored before. Due to constant improvement in haptics technology and increasing levels of research into and development of haptics-related algorithms, protocols and devices, there is a belief that haptics technology has a promising future

Sensory Communication

Contains table of contents for Section 2, an introduction and reports on twelve research projects.National Institutes of Health Grant 5 R01 DC00117National Institutes of Health Contract 2 P01 DC00361National Institutes of Health Grant 5 R01 DC00126National Institutes of Health Grant R01-DC00270U.S. Air Force - Office of Scientific Research Contract AFOSR-90-0200National Institutes of Health Grant R29-DC00625U.S. Navy - Office of Naval Research Grant N00014-88-K-0604U.S. Navy - Office of Naval Research Grant N00014-91-J-1454U.S. Navy - Office of Naval Research Grant N00014-92-J-1814U.S. Navy - Naval Training Systems Center Contract N61339-93-M-1213U.S. Navy - Naval Training Systems Center Contract N61339-93-C-0055U.S. Navy - Naval Training Systems Center Contract N61339-93-C-0083U.S. Navy - Office of Naval Research Grant N00014-92-J-4005U.S. Navy - Office of Naval Research Grant N00014-93-1-119

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility

Tactile displays, design and evaluation

Fritschi M. Tactile displays, design and evaluation. Bielefeld: Universität Bielefeld; 2016.This thesis presents the design and development of several tactile displays, as well as their eventual integration into a framework of tactile and kinesthetic stimulation. As a basis for the design of novel devices, an extensive survey of existing actuator principles and existing realizations of tactile displays is complemented by neurobiological and psychophysical findings. The work is structured along three main goals: First, novel actuator concepts are explored whose performance can match the challenging capabilities of human tactile perception. Second, novel kinematic concepts for experimental platforms are investigated that target an almost unknown sub-modality of tactile perception: The perception of shear force. Third, a setup for integrated tactile-kinesthetic displays is realized, and a first study on the psychophysical correlation between the tactile and the kinesthetic portion of haptic information is conducted. The developed devices proved to exceed human tactile capabilities and have already been used to learn more about the human tactile sense

Remote tactile feedback on interactive surfaces

Direct touch input on interactive surfaces has become a predominating standard for the manipulation of digital information in our everyday lives. However, compared to our rich interchange with the physical world, the interaction with touch-based systems is limited in terms of flexibility of input and expressiveness of output. Particularly, the lack of tactile feedback greatly reduces the general usability of a touch-based system and hinders from a productive entanglement of the virtual information with the physical world. This thesis proposes remote tactile feedback as a novel method to provide programmed tactile stimuli supporting direct touch interactions. The overall principle is to spatially decouple the location of touch input (e.g. fingertip or hand) and the location of the tactile sensation on the user's body (e.g. forearm or back). Remote tactile feedback is an alternative concept which avoids particular challenges of existing approaches. Moreover, the principle provides inherent characteristics which can accommodate for the requirements of current and future touch interfaces. To define the design space, the thesis provides a structured overview of current forms of touch surfaces and identifies trends towards non-planar and non-rigid forms with more versatile input mechanisms. Furthermore, a classification highlights limitations of the current methods to generate tactile feedback on touch-based systems. The proposed notion of tactile sensory relocation is a form of sensory substitution. Underlying neurological and psychological principles corroborate the approach. Thus, characteristics of the human sense of touch and principles from sensory substitution help to create a technical and conceptual framework for remote tactile feedback. Three consecutive user studies measure and compare the effects of both direct and remote tactile feedback on the performance and the subjective ratings of the user. Furthermore, the experiments investigate different body locations for the application of tactile stimuli. The results show high subjective preferences for tactile feedback, regardless of its type of application. Additionally, the data reveals no significant differences between the effects of direct and remote stimuli. The results back the feasibility of the approach and provide parameters for the design of stimuli and the effective use of the concept. The main part of the thesis describes the systematical exploration and analysis of the inherent characteristics of remote tactile feedback. Four specific features of the principle are identified: (1) the simplification of the integration of cutaneous stimuli, (2) the transmission of proactive, reactive and detached feedback, (3) the increased expressiveness of tactile sensations and (4) the provision of tactile feedback during multi-touch. In each class, several prototypical remote tactile interfaces are used in evaluations to analyze the concept. For example, the PhantomStation utilizes psychophysical phenomena to reduce the number of single tactile actuators. An evaluation with the prototype compares standard actuator technologies with each other in order to enable simple and scalable implementations. The ThermalTouch prototype creates remote thermal stimuli to reproduce material characteristics on standard touchscreens. The results show a stable rate of virtual object discrimination based on remotely applied temperature profiles. The AutmotiveRTF system is implemented in a vehicle and supports the driver's input on the in-vehicle-infotainment system. A field study with the system focuses on evaluating the effects of proactive and reactive feedback on the user's performance. The main contributions of the dissertation are: First, the thesis introduces the principle of remote tactile feedback and defines a design space for this approach as an alternative method to provide non-visual cues on interactive surfaces. Second, the thesis describes technical examples to rapidly prototype remote tactile feedback systems. Third, these prototypes are deployed in several evaluations which highlight the beneficial subjective and objective effects of the approach. Finally, the thesis presents features and inherent characteristics of remote tactile feedback as a means to support the interaction on today's touchscreens and future interactive surfaces.Die Interaktion mit berührungsempfindlichen Oberflächen ist heute ein Standard für die Manipulation von digitaler Information. Jedoch weist die Bedienung dieser interaktiven Bildschirme starke Einschränkungen hinsichtlich der Flexibilität bei der Eingabe und der Ausdruckskraft der Ausgabe auf, wenn man sie mit den vielfältigen Möglichkeiten des Umgangs mit Objekten in unserer Alltagswelt vergleicht. Besonders die nicht vorhandenen Tastsinnesrückmeldungen vermindern stark die Benutzbarkeit solcher Systeme und verhindern eine effektive Verknüpfung von virtueller Information und physischer Welt. Die vorliegende Dissertation beschreibt den Ansatz der 'distalen taktilen Rückmeldungen' als neuartige Möglichkeit zur Vermittlung programmierter Tastsinnesreize an Benutzer interaktiver Oberflächen. Das Grundprinzip dabei ist die räumliche Trennung zwischen der Eingabe durch Berührung (z.B. mit der Fingerspitze) und dem daraus resultierenden taktilen Reiz am Körper der Benutzer (z.B. am Rücken). Dabei vermeidet das Konzept der distalen taktilen Rückmeldungen einzelne technische und konzeptionelle Nachteile existierender Ansätze. Zusätzlich bringt es Interaktionsmöglichkeiten mit sich, die den Eigenheiten der Interaktion mit aktuellen und auch zukünftigen berührungsempfindlichen Oberflächen Rechnung tragen. Zu Beginn zeigt ein Überblick zu relevanten Arbeiten den aktuellen Forschungstrend hin zu nicht-flachen und verformbaren berührungsempfindlichen Oberflächen sowie zu vielfältigeren Eingabemethoden. Eine Klassifizierung ordnet existierende technische Verfahren zur Erzeugung von künstlichen Tastsinnesreizen und stellt jeweils konzeptuelle und technische Herausforderungen dar. Der in dieser Arbeit vorgeschlagene Ansatz der Verlagerung von Tastsinnesreizen ist eine Form der sensorischen Substitution, zugrunde liegende neurologische und psychologische Prinzipien untermauern das Vorgehen. Die Wirkprinzipien des menschlichen Tastsinnes und die Systeme zur sensorischen Substitution liefern daher konzeptionelle und technische Richtlinien zur Umsetzung der distalen taktilen Rückmeldungen. Drei aufeinander aufbauende Benutzerstudien vergleichen die Auswirkungen von direkten und distalen taktilen Rückmeldungen auf die Leistung und das Verhalten von Benutzern sowie deren subjektive Bewertung der Interaktion. Außerdem werden in den Experimenten die Effekte von Tastsinnesreizen an verschiedenen Körperstellen untersucht. Die Ergebnisse zeigen starke Präferenzen für Tastsinnesrückmeldungen, unabhängig von deren Applikationsort. Die Daten ergeben weiterhin keine signifikanten Unterschiede bei den quantitativen Effekten von direktem und distalen Rückmeldungen. Diese Ergebnisse befürworten die Realisierbarkeit des Ansatzes und zeigen Richtlinien für weitere praktische Umsetzungen auf. Der Hauptteil der Dissertation beschreibt die systematische Untersuchung und Analyse der inhärenten Möglichkeiten, die sich aus der Vermittlung distaler taktiler Rückmeldungen ergeben. Vier verschiedene Charakteristika werden identifiziert: (1) die vereinfachte Integration von Tastsinnesreizen, (2) die Vermittlung von proaktiven, reaktiven und entkoppelten Rückmeldungen, (3) die erhöhte Bandbreite der taktilen Signale und (4) die Darstellung von individuellen Tastsinnesreizen für verschiedene Kontaktpunkte mit der berührungsempfindlichen Oberfläche. Jedes dieser Prinzipien wird durch prototypische Systeme umgesetzt und in Benutzerstudien analysiert. Beispielsweise nutzt das System PhantomStation psychophysikalische Illusionen, um die Anzahl der einzelnen Reizgeber zu reduzieren. In einer Evaluierung des Prototypen werden mehrere Aktuatortechnologien verglichen, um einfache und skalierbare Ansätze zu identifizieren. Der ThermalTouch-Prototyp wird dazu genutzt, distale thermale Reize zu vermitteln, um so Materialeigenschaften auf Berührungsbildschirmen darstellen zu können. Eine Benutzerstudie zeigt, dass sich auf Basis dieser Temperaturverläufe virtuelle Objekte unterscheiden lassen. Das AutomotiveRTF-System wird schließlich in ein Kraftfahrzeug integriert, um den Fahrer bei der Eingabe auf dem Informations- und Unterhaltungssystem zu unterstützen. Eine Feldstudie untersucht die Auswirkungen der proaktiven und reaktiven Rückmeldungen auf die Benutzerleistung. Die vorliegende Dissertation leistet mehrere Beiträge zur Mensch-Maschine-Interaktion: Das Prinzip der distalen taktilen Rückmeldungen wird eingeführt als Alternative zur Erzeugung nicht-visueller Rückmeldungen auf interaktiven Oberflächen. Es werden technische Verfahrensweisen zur prototypischen Implementierung solcher Systeme vorgeschlagen. Diese technischen Prototypen werden in einer Vielzahl verschiedener Benutzerstudien eingesetzt, welche die quantitativen und qualitativen Vorteile des Ansatzes aufzeigen. Schließlich wird gezeigt, wie sich das Prinzip zur Unterstützung heutiger und zukünftiger Interaktionsformen mit berührungsempfindlichen Bildschirmen nutzen lässt