13,514 research outputs found
Motion estimation and CABAC VLSI co-processors for real-time high-quality H.264/AVC video coding
Real-time and high-quality video coding is gaining a wide interest in the research and industrial community for different applications. H.264/AVC, a recent standard for high performance video coding, can be successfully exploited in several scenarios including digital video broadcasting, high-definition TV and DVD-based systems, which require to sustain up to tens of Mbits/s. To that purpose this paper proposes optimized architectures for H.264/AVC most critical tasks, Motion estimation and context adaptive binary arithmetic coding. Post synthesis results on sub-micron CMOS standard-cells technologies show that the proposed architectures can actually process in real-time 720 Ă 480 video sequences at 30 frames/s and grant more than 50 Mbits/s. The achieved circuit complexity and power consumption budgets are suitable for their integration in complex VLSI multimedia systems based either on AHB bus centric on-chip communication system or on novel Network-on-Chip (NoC) infrastructures for MPSoC (Multi-Processor System on Chip
Mesh-based video coding for low bit-rate communications
In this paper, a new method for low bit-rate content-adaptive mesh-based video coding is proposed. Intra-frame coding of this method employs feature map extraction for node distribution at specific threshold levels to achieve higher density placement of initial nodes for regions that contain high frequency features and conversely sparse placement of initial nodes for smooth regions. Insignificant nodes are largely removed using a subsequent node elimination scheme. The Hilbert scan is then applied before quantization and entropy coding to reduce amount of transmitted information. For moving images, both node position and color parameters of only a subset of nodes may change from frame to frame. It is sufficient to transmit only these changed parameters. The proposed method is well-suited for video coding at very low bit rates, as processing results demonstrate that it provides good subjective and objective image quality at a lower number of required bits
Real-time complexity constrained encoding
Complex software appliances can be deployed on hardware with limited available computational resources. This computational boundary puts an additional constraint on software applications. This can be an issue for real-time applications with a fixed time constraint such as low delay video encoding. In the context of High Efficiency Video Coding (HEVC), a limited number of publications have focused on controlling the complexity of an HEVC video encoder. In this paper, a technique is proposed to control complexity by deciding between 2Nx2N merge mode and full encoding, at different Coding Unit (CU) depths. The technique is demonstrated in two encoders. The results demonstrate fast convergence to a given complexity threshold, and a limited loss in rate-distortion performance (on average 2.84% Bjontegaard delta rate for 40% complexity reduction)
Layer Selection in Progressive Transmission of Motion-Compensated JPEG2000 Video
MCJ2K (Motion-Compensated JPEG2000) is a video codec based on MCTF (Motion- Compensated Temporal Filtering) and J2K (JPEG2000). MCTF analyzes a sequence of images, generating a collection of temporal sub-bands, which are compressed with J2K. The R/D (Rate-Distortion) performance in MCJ2K is better than the MJ2K (Motion JPEG2000) extension, especially if there is a high level of temporal redundancy. MCJ2K codestreams can be served by standard JPIP (J2K Interactive Protocol) servers, thanks to the use of only J2K standard file formats. In bandwidth-constrained scenarios, an important issue in MCJ2K is determining the amount of data of each temporal sub-band that must be transmitted to maximize the quality of the reconstructions at the client side. To solve this problem, we have proposed two rate-allocation algorithms which provide reconstructions that are progressive in quality. The first, OSLA (Optimized Sub-band Layers Allocation), determines the best progression of quality layers, but is computationally expensive. The second, ESLA (Estimated-Slope sub-band Layers Allocation), is sub-optimal in most cases, but much faster and more convenient for real-time streaming scenarios. An experimental comparison shows that even when a straightforward motion compensation scheme is used, the R/D performance of MCJ2K competitive is compared not only to MJ2K, but also with respect to other standard scalable video codecs
Recommended from our members
Research and developments of Dirac video codec
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video
data over the bandwidth limited erroneous channels is another important issue. To enable a video
codec for broadcasting application, it is required to implement the corresponding coding tools (e.g.
error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and
hence their specifications are not defined in the standard. In Dirac as well, the original codec is
optimized for storage purpose only and so, several non-normative part of the encoding tools are still
required in order to be able to use in other types of application.
Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of
the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient
coding method used here is a simple and low complex coding scheme which provides the
error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet
erasure wired network. The scheme combines source and channel coding approach where error-resilient
source coding is achieved by data partitioning in the wavelet transformed domain and
channel coding is achieved through the application of either Rate-Compatible Punctured
Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus
MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the
Internet broadcasting application.
But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from
the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the
2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality
Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to
achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the
bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the
optimum QF of the current encoding frame for a given target bitrate, R.
In some applications like video conferencing, real-time encoding and decoding with minimum
delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the
complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder
is the most time consuming stage. So, reducing the complexity of the motion estimation stage will
certainly give one step closer to the real-time application. So, as a partial contribution toward realtime
application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed
and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of
motion estimation. The same strategy was implemented in both Dirac and H.264 in order to
investigate its performance on different codecs. Together with this fast ME strategy, a method which
is called partial cost function calculation in order to further reduce down the computational load of the
cost function calculation was presented. The calculation is based upon the pre-defined set of patterns
which were chosen in such a way that they have as much maximum coverage as possible over the
whole block.
In summary, this research work has contributed to the error-resilient transmission of compressed
bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this,
the final phase of the research has partially contributed toward the real-time application of the Dirac
video codec by implementing a fast motion estimation strategy together with partial cost function
calculation idea.BBC R&D and Brunel University
- âŚ