286 research outputs found
Selective Flooding for Better QoS Routing
Quality-of-service (QoS) requirements for the timely delivery of real-time multimedia raise new challenges for the networking world. A key component of QoS is QoS routing which allows the selection of network routes with sufficient resources for requested QoS parameters. Several techniques have been proposed in the literature to compute QoS routes, most of which require dynamic update of link-state information across the Internet. Given the growing size of the Internet, it is becoming increasingly difficult to gather up-to-date state information in a dynamic environment. We propose a new technique to compute QoS routes on the Internet in a fast and efficient manner without any need for dynamic updates. Our method, known as Selective Flooding, checks the state of the links on a set of pre-computed routes from the source to the destination in parallel and based on this information computes the best route and then reserves resources. We implemented Selective Flooding on a QoS routing simulator and evaluated the performance of Selective Flooding compared to source routing for a variety of network parameters. We find Selective Flooding consistently outperforms source routing in terms of call-blocking rate and outperforms source routing in terms of network overhead for some network conditions. The contributions of this thesis include the design of a new QoS routing algorithm, Selective Flooding, extensive evaluation of Selective Flooding under a variety of network conditions and a working simulation model for future research
Mobile-IP ad-hoc network MPLS-based with QoS support.
The support for Quality of Service (QoS) is the main focus of this thesis. Major issues and challenges for Mobile-IP Ad-Hoc Networks (MANETs) to support QoS in a multi-layer manner are considered discussed and investigated through simulation setups. Different parameters contributing to the subjective measures of QoS have been considered and consequently, appropriate testbeds were formed to measure these parameters and compare them to other schemes to check for superiority. These parameters are: Maximum Round-Trip Delay (MRTD), Minimum Bandwidth Guaranteed (MBG), Bit Error Rate (BER), Packet Loss Ratio (PER), End-To-End Delay (ETED), and Packet Drop Ratio (PDR) to name a few. For network simulations, NS-II (Network Simulator Version II) and OPNET simulation software systems were used.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .A355. Source: Masters Abstracts International, Volume: 44-03, page: 1444. Thesis (M.Sc.)--University of Windsor (Canada), 2005
Design issues in quality of service routing
The range of applications and services which can be successfully deployed in packet-switched networks such as the Internet is limited when the network does nor provide Quality of Service (QoS). This is the typical situation in today's Internet. A key aspect in providing QoS support is the requirement for an optimised and intelligent mapping of customer traffic flows onto a physical network topology. The problem of selecting such paths is the task of QoS routing QoS routing algorithms are intrinsically complex and need careful study before being implemented in real networks. Our aim is to address some of the challenges present m the deployment of QoS routing methods.
This thesis considers a number of practical limitations of existing QoS routing algorithms and presents solutions to the problems identified. Many QoS routing algorithms are inherently unstable and induce traffic fluctuations in the network. We describe two new routing algorithms which address this problem The first method - ALCFRA (Adaptive Link Cost Function Routing Algorithm) - can be used in networks with sparse connectivity, while the second algorithm - CAR (Connectivity Aware Routing) - is designed to work well in other network topologies. We also describe how to ensure co-operative interaction of the routing algorithms in multiple domains when hierarchial routing is used and also present a solution to the problems of how to provide QoS support m a network where not all nodes are QoS-aware.
Our solutions are supported by extensive simulations over a wide range of network topologies and their performance is compared to existing algorithms. It is shown that our solutions advance the state of the art in QoS routing and facilitate the deployment of QoS support in tomorrow's Internet
Recommended from our members
Some new localized quality of service models and algorithms for communication networks. The development and evaluation of new localized quality of service routing algorithms and path selection methods for both flat and hierarchical communication networks.
The Quality of Service (QoS) routing approach is gaining an increasing interest in the Internet community due to the new emerging Internet applications such as real-time multimedia applications. These applications require better levels of quality of services than those supported by best effort networks. Therefore providing such services is crucial to many real time and multimedia applications which have strict quality of service requirements regarding bandwidth and timeliness of delivery.
QoS routing is a major component in any QoS architecture and thus has been studied extensively in the literature. Scalability is considered one of the major issues in designing efficient QoS routing algorithms due to the high cost of QoS routing both in terms of computational effort and communication overhead.
Localized quality of service routing is a promising approach to overcome the scalability problem of the conventional quality of service routing approach. The localized quality of service approach eliminates the communication overhead because it does not need the global network state information.
The main aim of this thesis is to contribute towards the localised routing area by proposing and developing some new models and algorithms. Toward this goal we make the following major contributions. First, a scalable and efficient QoS routing algorithm based on a localised approach to QoS routing has been developed and evaluated. Second, we have developed a path selection technique that can be used with existing localized QoS routing algorithms to enhance their scalability and performance. Third, a scalable and efficient hierarchical QoS routing algorithm based on a localised approach to QoS routing has been developed and evaluated
Scalable QoS routing in MPLS networks using mobile code
In a continually evolving Internet, tools such as Q u a lity o f Service ro u tin g must be used in order to accommodate user demands. However, deploying and developing QoS routing in the legacy Internet is difficult. Multiprotocol Label Switching (MPLS) facilitates the deployment of QoS routing, due to its separation of functions between the control and forwarding plane. Developing QoS routing raises scalability issues within very large networks. I propose overcoming these issues by using topology aggregation and distributed routing based on modem techniques such as active networks and mobile agents. However, topology aggregation introduces inaccuracy, which has a negative impact on QoS routing performance. To avoid such problems I propose a hierarchical routing protocol, called Macro-routing, which by using distributed route computation is able to process more detailed information and thus to use the most accurate aggregation technique, i.e. Full-Mesh. Therefore, the protocol is more likely to find the best path between source and destination, and can also find more than one available path.
QoS routing, which is used for finding feasible paths that simultaneously satisfy multiple constraints, is also called multiple-constrained routing and is an NP-complete problem. The difficulty of solving such problems increases in a hierarchical context, where aggregation techniques influence the path computation process. I propose a new aggregation technique which allows the selection of multiple paths that satisfy multiple QoS constraints. This reduces the probability of a false negative, i.e., of the routing algorithm incorrectly reporting that no path satisfying the constraints exists. This aggregation technique is called extended full-mesh (EFM) and is intended for use with the Macro-routing protocol. Deploying these protocols in the Internet will allow multi-constrained routing to be practically implemented on large networks
- …