4,968 research outputs found
Design and analysis of a beacon-less routing protocol for large volume content dissemination in vehicular ad hoc networks
Largevolumecontentdisseminationispursuedbythegrowingnumberofhighquality applications for Vehicular Ad hoc NETworks(VANETs), e.g., the live road surveillance service and the video-based overtaking assistant service. For the highly dynamical vehicular network topology, beacon-less routing protocols have been proven to be efficient in achieving a balance between the system performance and the control overhead. However, to the authorsâ best knowledge, the routing design for large volume content has not been well considered in the previous work, which will introduce new challenges, e.g., the enhanced connectivity requirement for a radio link. In this paper, a link Lifetime-aware Beacon-less Routing Protocol (LBRP) is designed for large volume content delivery in VANETs. Each vehicle makes the forwarding decision based on the message header information and its current state, including the speed and position information. A semi-Markov process analytical model is proposed to evaluate the expected delay in constructing one routing path for LBRP. Simulations show that the proposed LBRP scheme outperforms the traditional dissemination protocols in providing a low end-to-end delay. The analytical model is shown to exhibit a good match on the delay estimation with Monte Carlo simulations, as well
A Simple and Robust Dissemination Protocol for VANETs
Several promising applications for Vehicular Ad-hoc Networks (VANETs) exist. For most of these applications, the communication among vehicles is envisioned to be based on the broadcasting of messages. This is due to the inherent highly mobile environment and importance of these messages to vehicles nearby. To deal with broadcast communication, dissemination protocols must be defined in such a way as to (i) prevent the so-called broadcast storm problem in dense networks and (ii) deal with disconnected networks in sparse topologies. In this paper, we present a Simple and Robust Dissemination (SRD) protocol that deals with these requirements in both sparse and dense networks. Its novelty lies in its simplicity and robustness. Simplicity is achieved by considering only two states (cluster tail and non- tail) for a vehicle. Robustness is achieved by assigning message delivery responsibility to multiple vehicles in sparse networks. Our simulation results show that SRD achieves high delivery ratio and low end-to-end delay under diverse traffic conditions
Trust model for certificate revocation in Ad hoc networks
In this paper we propose a distributed trust model for certificate revocation in Adhoc networks. The proposed model allows trust to be built over time as the number of interactions between nodes increase. Furthermore, trust in a node is defined not only in terms of its potential for maliciousness, but also in terms of the quality of the service it provides. Trust in nodes where there is little or no history of interactions is determined by recommendations from other nodes. If the nodes in the network are selfish, trust is obtained by an exchange of portfolios. Bayesian networks form the underlying basis for this model
Overlapping Multi-hop Clustering for Wireless Sensor Networks
Clustering is a standard approach for achieving efficient and scalable
performance in wireless sensor networks. Traditionally, clustering algorithms
aim at generating a number of disjoint clusters that satisfy some criteria. In
this paper, we formulate a novel clustering problem that aims at generating
overlapping multi-hop clusters. Overlapping clusters are useful in many sensor
network applications, including inter-cluster routing, node localization, and
time synchronization protocols. We also propose a randomized, distributed
multi-hop clustering algorithm (KOCA) for solving the overlapping clustering
problem. KOCA aims at generating connected overlapping clusters that cover the
entire sensor network with a specific average overlapping degree. Through
analysis and simulation experiments we show how to select the different values
of the parameters to achieve the clustering process objectives. Moreover, the
results show that KOCA produces approximately equal-sized clusters, which
allows distributing the load evenly over different clusters. In addition, KOCA
is scalable; the clustering formation terminates in a constant time regardless
of the network size
Recommended from our members
Effective video multicast over wireless internet
With the rapid growth of wireless networks and great success of Internet video, wireless video services are expected to be widely deployed in the near future. As different types of wireless networks are converging into all IP networks, i.e., the Internet, it is important to study video delivery over the wireless Internet. This paper proposes a novel end-system based adaptation protocol calledWireless Hybrid Adaptation Layered Multicast (WHALM) protocol for layered video multicast over wireless Internet. In WHALM the sender dynamically collects bandwidth distribution from the receivers and uses an optimal layer rate allocation mechanism to reduce the mismatches between the coarse-grained layer subscription levels and the heterogeneous and dynamic rate requirements from the receivers, thus maximizing the degree of satisfaction of all the receivers in a multicast session. Based on sampling theory and theory of probability, we reduce the required number of bandwidth feedbacks to a reasonable degree and use a scalable feedback mechanism to control the feedback process practically. WHALM is also tuned to perform well in wireless networks by integrating an end-to-end loss differentiation algorithm (LDA) to differentiate error losses from congestion losses at the receiver side. With a series of simulation experiments over NS platform, WHALM has been proved to be able to greatly improve the degree of satisfaction of all the receivers while avoiding congestion collapse on the wireless Internet
Energy Efficient Location Aided Routing Protocol for Wireless MANETs
A Mobile Ad-Hoc Network (MANET) is a collection of wireless mobile nodes
forming a temporary network without using any centralized access point,
infrastructure, or centralized administration. In this paper we introduce an
Energy Efficient Location Aided Routing (EELAR) Protocol for MANETs that is
based on the Location Aided Routing (LAR). EELAR makes significant reduction in
the energy consumption of the mobile nodes batteries by limiting the area of
discovering a new route to a smaller zone. Thus, control packets overhead is
significantly reduced. In EELAR a reference wireless base station is used and
the network's circular area centered at the base station is divided into six
equal sub-areas. At route discovery instead of flooding control packets to the
whole network area, they are flooded to only the sub-area of the destination
mobile node. The base station stores locations of the mobile nodes in a
position table. To show the efficiency of the proposed protocol we present
simulations using NS-2. Simulation results show that EELAR protocol makes an
improvement in control packet overhead and delivery ratio compared to AODV,
LAR, and DSR protocols.Comment: 9 Pages IEEE format, International Journal of Computer Science and
Information Security, IJCSIS 2009, ISSN 1947 5500, Impact factor 0.423,
http://sites.google.com/site/ijcsis
Design and analysis of adaptive hierarchical low-power long-range networks
A new phase of evolution of Machine-to-Machine (M2M) communication has started where vertical Internet of Things (IoT) deployments dedicated to a single application domain gradually change to multi-purpose IoT infrastructures that service different applications across multiple industries. New networking technologies are being deployed operating over sub-GHz frequency bands that enable multi-tenant connectivity over long distances and increase network capacity by enforcing low transmission rates to increase network capacity. Such networking technologies allow cloud-based platforms to be connected with large numbers of IoT devices deployed several kilometres from the edges of the network. Despite the rapid uptake of Long-power Wide-area Networks (LPWANs), it remains unclear how to organize the wireless sensor network in a scaleable and adaptive way. This paper introduces a hierarchical communication scheme that utilizes the new capabilities of Long-Range Wireless Sensor Networking technologies by combining them with broadly used 802.11.4-based low-range low-power technologies. The design of the hierarchical scheme is presented in detail along with the technical details on the implementation in real-world hardware platforms. A platform-agnostic software firmware is produced that is evaluated in real-world large-scale testbeds. The performance of the networking scheme is evaluated through a series of experimental scenarios that generate environments with varying channel quality, failing nodes, and mobile nodes. The performance is evaluated in terms of the overall time required to organize the network and setup a hierarchy, the energy consumption and the overall lifetime of the network, as well as the ability to adapt to channel failures. The experimental analysis indicate that the combination of long-range and short-range networking technologies can lead to scalable solutions that can service concurrently multiple applications
- âŠ