Energy and Load Aware Multipath Route Selection for Mobile Ad hoc Networks

Routing protocols are crucial in delivering packets from source to destination in scenarios where destinations are not directly within the sender’s range. Various routing protocols employ different strategies, but their presence is indispensable for seamless data transfer from source to destination. Multipath routing, while offering load balancing, often falls short in efficiently distributing the network’s load, thus adversely impacting the vital communication resource—energy—due to packet loss. This paper introduces an Energy-Efficient Load-Aware Routing (ELAM) scheme to enhance the routing performance of Mobile Ad hoc Networks (MANETs). Our motivation stems from the observation that many multipath routing protocols are designed based on a single criterion, such as the shortest path, often neglecting load balancing or energy conservation. While the Ad Hoc On-Demand Multipath Distance Vector (AOMDV) protocol demonstrates improved performance compared to unipath routing schemes, achieving both load balancing and energy efficiency remains challenging.  The proposed ELAM scheme considers energy conservation, the shortest path, and load balancing to enhance the performance of multipath routing protocols. ELAM considers the shortest path and energy conservation while accommodating more than two paths in a MANET. We introduce an energy factor that contributes to the network’s lifespan, with efficient load balancing enhancing the longevity of nodes and the overall network. The energy factor provides insights into the energy status, and we evaluate the performance of AODV, AOMDV, and the proposed ELAM. The results demonstrate that the proposed scheme outperforms existing protocols and effectively manages unnecessary energy consumption by mobile nodes. Our performance analysis reveals a minimum 5% improvement in throughput and Packet Delivery Ratio (PDR), indicating reduced packet dropping and network delays

Light Load Path Selection Techniques for Control Congestion in MANET (ENBA)

The nodes have limited bandwidth and processing capability. The routing protocols cannot handle the congestion due to heavy load in mobile ad hoc networks. Several routes are established in the network, and some intermediate nodes are common. The dynamic behaviour of the network creates problems for strong link establishment. The routing protocol establishes the connection between the sender and receiver. The efficient routing approach uses the concept of load balancing to reduce packet loss in a network. The heavy load on the network affects the node’s buffer capacity and link capacity. The research proposed the Effective Network Behavior Analyze (ENBA) for route sections to control congestion in MANET. This paper’s effort is driven by the idea of considering several aspects of the routing design of Mobile Ad hoc Networks (MANETs) in a unified manner. ENBA is a routing strategy that uses the shortest path for routing and balances the load by managing incoming and outgoing packets on links and nodes. In this routing scheme, the shortest path measures the buffer capacity of the nodes with higher TTL values selected for sending the data packets in the network. The link capacity is based on the flow of packets in the network. Queue optimisation is a continuous optimisation in which we count the number of packets incoming and decide the link reliability in a dynamic network. The performance of ENBA is compared with the Ad hoc On-demand Multipath Distance Vector -Modified (AOMDV-M) routing protocol. The ENDA strategy outperforms the competition in terms of performance over a shorter period. In the proposed technique, performance matrices like PDR, overhead, and delay provide better results than the previous AOMDV-M routing approach

Enhancement of Network Life Time using Binary Tree Based Multicast Routing Protocol for Mobile Ad hoc Network

A mobile ad hoc network (MANET) is an interconnected system of mobile hosts without a fixed infrastructure. In MANETs, each mobile host has multi-hop transmission capability, and it has to serve as a router. Owing to the dynamic topology and limited resources of mobile hosts, the routing scheme in MANETs presents an important challenge. In this study, a Enhancement of Network Life Time using Binary Tree Based Multicast Routing Protocol for MANET is proposed. In this proposed scheme, all nodes are randomly classified into two types, group-1 and group-2. To achieve the load balance, two multicast trees (tree-1 for group-1 and tree-2 for group-2) are constructed. The proposed system mainly focused on maintaining route stability. Thus proposed system outperform AOMDV version of AODV in term of Performance evaluation metrics such as packet delivery ratio, control overhead , Network life time, Normalized delay

An Improvement in Congestion Control Using Multipath Routing in Manet

The ad hoc connections, which opens many opportunities for MANET applications. In ad hoc network nodes are movable and there is no centralised management. Routing is an important factor in mobile ad hoc network which not only works well with a small network, but also it can also work well if network get expanded dynamically. Routing in Manets is a main factor considered among all the issues. Mobile nodes in Manet have limited transmission capacity, they intercommunicate by multi hop relay. Multi hop routing have many challenges such as limited wireless bandwidth, low device power, dynamically changing network topology, and high vulnerability to Failure. To answer those challenges, many routing algorithms in Manets were proposed. But one of the problems in routing algorithm is congestion which decreases the overall performance of the network so in this paper we are trying to identify the best routing algorithm which will improve the congestion control mechanism among all the Multipath routing protocols

Variable power transmission in highly Mobile Ad-Hoc Networks

Mobile Ad Hoc Networks pose challenges in terms of power control, due to their fixed transmission power, the mobility of nodes and a constantly changing topology. High levels of power are needed in wireless networks, particularly for routing. As a result of the increase in the number of communication devices being used, there is the challenge of increased density within these networks, and a need to extend the battery life of communication devices. In order to address this challenge, this thesis presents the development of a new protocol (Dynamic Power AODV), which is an enhancement of the Ad Hoc On Demand Distance Vector (AODV) protocol. The new protocol dynamically adjusts the transmission power based on the range, which depends on node density. This thesis provides a systematic evaluation of the performance of DP-AODV, in a high speed and high density environment, in comparison with three other routing protocols. The experiments demonstrated that DP-AODV performed better than two of the protocols in all scenarios. As compared to the third protocol (AOMDV), DP-AODV gave better performance results for throughput and Power Consumption, but AOMDV performed better in terms of Packet Delivery Fraction rate and End-to-End Delay in some cases

An Improvement in Congestion Control Using Multipath Routing in MANET

The ad hoc connections, which opens many opportunities for MANET applications. In ad hoc network nodes are movable and there is no centralised management. Routing is an important factor in mobile ad hoc network which not only works well with a small network, but also it can also work well if network get expanded dynamically. Routing in Manets is a main factor considered among all the issues. Mobile nodes in Manet have limited transmission capacity, they intercommunicate by multi hop relay. Multi hop routing have many challenges such as limited wireless bandwidth, low device power, dynamically changing network topology, and high vulnerability to Failure. To answer those challenges, many routing algorithms in Manets were proposed. But one of the problems in routing algorithm is congestion which decreases the overall performance of the network so in this paper we are trying to identify the best routing algorithm which will improve the congestion control mechanism among all the Multipath routing protocols. Keywords: Disjoint Multipath, Multi hop, reliability, Congestion Control, Optimizatio

Improving routing performance of multipath ad hoc on-demand distance vector in mobile add hoc networks.

The aim of this research is to improve routing fault tolerance in Mobile Ad hoc Networks (MANETs) by optimising mUltipath routing in a well-studied reactive and single path routing protocol known as Ad hoc On-demand Distance Vector (AODV). The research also aims to prove the effect of varying waiting time of Route Reply (RREP) procedure and utilising the concept of efficient routes on the performance of multipath extensions to AODV. Two novel multipath routing approaches are developed in this thesis as new extensions to AODV to optimise routing overhead by improving Route Discovery Process (RDP) and Route Maintenance Process (RMP) of multipath AODV. The first approach is a Iinkdisjoint multipath extension called 'Thresho)d efficient Routes in multipath AODV' (TRAODV) that optimises routing packets ~verhead by improving the RDP of AODV which is achieved by detecting the waiting time required for RREP procedure to receive a threshold number of efficient routes. The second approach is also a link-disjoint mUltipath extension called 'On-demand Route maintenance in Multipath AoDv' (ORMAD) which is an extension to TRAODV that optimises routing packets and delay overhead by improving the RMP of TRAODV. ORMAD applies the concepts of threshold waiting time and efficient routes to both phases RDP and RMP. It also applies RMP only to efficient routes which are selected in the RDP and when a route fails, it invokes a local repair procedure between upstream and downstream nodes of the broken link. This mechanism produces a set of alternative subroutes with less number of hops which enhances route efficiency and consequently minimises the routing overhead. TRAODV and ORMAD are implemented and evaluated against two existing multipath extensions to,AODV protocol and two traditional multipath protocols. The existing extensions to AODV used in the evaluation are a well-known protocol called Ad hoc On-demand Multipath Distance Vector (AOMDV) and a recent extension called Multiple Route AODV (MRAODV) protocol which is extended in this thesis to the new approach TRAODV while the traditional multipath protocols used in the evaluation are Dynamic Source Routing (DSR) and Temporally Ordered Routing Algorithm (TORA). Protocols are implemented using NS2 and evaluated under the same simulation environment in terms of four performance metrics; packet delivery fraction, average end-to-end delay, routing packets overhead, and throughput. Simulation results of TRAODV evaluation show that the average number of routes stored in a routing table of MRAODV protocol is always larger than the average number of routes in TRAODV. Simulation results show that TRAODV reduces the overall routing packets overhead compared to both extensions AOMDV and MRAODV, especially for large network size and high mobility. A vital drawback of TRAODV is that its performance is reduced compared to AOMDV and MRAODV in terms of average end-to-end delay. Additionally, TORA still outperforms TRAODV and the other extensions to AODV in terms of routing packets overhead. In order to overcome the drawbacks of TRAODV, ORMAD is developed by improving the RDP of TRAODV. The performance of ORMAD is evaluated against RREP waiting time using the idea of utilising the efficient routes in both phases RDP and RMP. Simulation results of ORMAD show that the performance is affected by varying the two RREP waiting times of both RDP and RMP in different scenarios. As shown by the simulation results, applying the short and long waiting times in both phases tends to less performance in terms of routing packets overhead while applying the moderate waiting times tends to better performance. ORMAD enhances routing packets overhead and the average end-to-end delay compared to TRAODV, especially in high mobility scenarios. ORMAD has the closest performance to TORA protocol in terms of routing packets overhead compared to ~M~a~M~OW . Relevant concepts are formalised for ORMAD approach and conducted as an analytical model in this thesis involving the\vhole process of multipath routing in AODV extensions. ORMAD analytical model describes how the two phases RDP and RMP interact with each other with regard to two performance metrics; total number of detected routes and Route Efficiency.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

QoS in Node-disjoint Routing for Ad Hoc Networks

PhDA mobile ad hoc network (MANET) is a collection of mobile nodes that can communicate with each other without using any fixed infrastructure. It is necessary for MANETs to have efficient routing protocol and quality of service (QoS) mechanism to support multimedia applications such as video and voice. Node-Disjoint Multipath Routing Protocol (NDMR) is a practical protocol in MANETs: it reduces routing overhead dramatically and achieves multiple node-disjoint routing paths. Because QoS support in MANETs is important as best-effort routing is not efficient for supporting multimedia applications, this thesis presents a novel approach to provide that support. In this thesis NDMR is enhanced to provide a QoS enabled NDMR that decreases the transmission delay between source and destination nodes. A multi-rate mechanism is also implemented in the new protocol so that the NDMR QoS can minimise the overall delays. It is shown that these approaches lead to significant performance gains. A modification to NDMR is also proposed to overcome some of the limitations of the original