Collaborative Bimanual Manipulation Using Optimal Motion Adaptation and Interaction Control Retargetting Human Commands to Feasible Robot Control References

This article presents a robust and reliable human–robot collaboration (HRC) framework for bimanual manipulation. We propose an optimal motion adaptation method to retarget arbitrary human commands to feasible robot pose references while maintaining payload stability. The framework comprises three modules: 1) a task-space sequential equilibrium and inverse kinematics optimization ( task-space SEIKO ) for retargeting human commands and enforcing feasibility constraints, 2) an admittance controller to facilitate compliant human–robot physical interactions, and 3) a low-level controller improving stability during physical interactions. Experimental results show that the proposed framework successfully adapted infeasible and dangerous human commands into continuous motions within safe boundaries and achieved stable grasping and maneuvering of large and heavy objects on a real dual-arm robot via teleoperation and physical interaction. Furthermore, the framework demonstrated the capability in the assembly task of building blocks and the insertion task of industrial power connectors

Design of an Anthropomorphic, Compliant, and Lightweight Dual Arm for Aerial Manipulation

This paper presents an anthropomorphic, compliant and lightweight dual arm manipulator designed and developed for aerial manipulation applications with multi-rotor platforms. Each arm provides four degrees of freedom in a human-like kinematic configuration for end effector positioning: shoulder pitch, roll and yaw, and elbow pitch. The dual arm, weighting 1.3 kg in total, employs smart servo actuators and a customized and carefully designed aluminum frame structure manufactured by laser cut. The proposed design reduces the manufacturing cost as no computer numerical control machined part is used. Mechanical joint compliance is provided in all the joints, introducing a compact spring-lever transmission mechanism between the servo shaft and the links, integrating a potentiometer for measuring the deflection of the joints. The servo actuators are partially or fully isolated against impacts and overloads thanks to the ange bearings attached to the frame structure that support the rotation of the links and the deflection of the joints. This simple mechanism increases the robustness of the arms and safety in the physical interactions between the aerial robot and the environment. The developed manipulator has been validated through different experiments in fixed base test-bench and in outdoor flight tests.Unión Europea H2020-ICT-2014- 644271Ministerio de Economía y Competitividad DPI2015-71524-RMinisterio de Economía y Competitividad DPI2017-89790-

Automatic generation of robot and manual assembly plans using octrees

This paper aims to investigate automatic assembly planning for robot and manual assembly. The octree decomposition technique is applied to approximate CAD models with an octree representation which are then used to generate robot and manual assembly plans. An assembly planning system able to generate assembly plans was developed to build these prototype models. Octree decomposition is an effective assembly planning tool. Assembly plans can automatically be generated for robot and manual assembly using octree models. Research limitations/implications - One disadvantage of the octree decomposition technique is that it approximates a part model with cubes instead of using the actual model. This limits its use and applications when complex assemblies must be planned, but in the context of prototyping can allow a rough component to be formed which can later be finished by hand. Assembly plans can be generated using octree decomposition, however, new algorithms must be developed to overcome its limitations

Automated sequence and motion planning for robotic spatial extrusion of 3D trusses

While robotic spatial extrusion has demonstrated a new and efficient means to fabricate 3D truss structures in architectural scale, a major challenge remains in automatically planning extrusion sequence and robotic motion for trusses with unconstrained topologies. This paper presents the first attempt in the field to rigorously formulate the extrusion sequence and motion planning (SAMP) problem, using a CSP encoding. Furthermore, this research proposes a new hierarchical planning framework to solve the extrusion SAMP problems that usually have a long planning horizon and 3D configuration complexity. By decoupling sequence and motion planning, the planning framework is able to efficiently solve the extrusion sequence, end-effector poses, joint configurations, and transition trajectories for spatial trusses with nonstandard topologies. This paper also presents the first detailed computation data to reveal the runtime bottleneck on solving SAMP problems, which provides insight and comparing baseline for future algorithmic development. Together with the algorithmic results, this paper also presents an open-source and modularized software implementation called Choreo that is machine-agnostic. To demonstrate the power of this algorithmic framework, three case studies, including real fabrication and simulation results, are presented.Comment: 24 pages, 16 figure

Human-like arm motion generation: a review

In the last decade, the objectives outlined by the needs of personal robotics have led to the rise of new biologically-inspired techniques for arm motion planning. This paper presents a literature review of the most recent research on the generation of human-like arm movements in humanoid and manipulation robotic systems. Search methods and inclusion criteria are described. The studies are analyzed taking into consideration the sources of publication, the experimental settings, the type of movements, the technical approach, and the human motor principles that have been used to inspire and assess human-likeness. Results show that there is a strong focus on the generation of single-arm reaching movements and biomimetic-based methods. However, there has been poor attention to manipulation, obstacle-avoidance mechanisms, and dual-arm motion generation. For these reasons, human-like arm motion generation may not fully respect human behavioral and neurological key features and may result restricted to specific tasks of human-robot interaction. Limitations and challenges are discussed to provide meaningful directions for future investigations.FCT Project UID/MAT/00013/2013FCT–Fundação para a Ciência e Tecnologia within the R&D Units Project Scope: UIDB/00319/2020

Accomplishing task-invariant assembly strategies by means of an inherently accommodating robot arm

Despite the fact that the main advantage of robot manipulators was always meant to be their flexibility, they have not been applied widely to the assembly of industrial components in situations other than those where hard automation might be used. We identify the two main reasons for this as the 'fragility' of robot operation during tasks that involve contact, and the lack of an appropriate user interface. This thesis describes an attempt to address these problems.We survey the techniques that have been proposed to bring the performance of cur¬ rent industrial robot manipulators in line with expectations, and conclude that the main obstacle in realising a flexible assembly robot that exhibits robust and reliable behaviour is the problem of spatial uncertainty.Based on observations of the performance of position-controlled robot manipulators and what is involved during rigid-body part mating, we propose a model of assembly tasks that exploits the shape invariance of the part geometry across instances of a task. This allows us to escape from the problem of spatial uncertainty because we are 110 longer working in spatial terms. In addition, because the descriptions of assembly tasks that we derive are task-invariant, i.e. they are not dependent on part size or location, they lend themselves naturally to a task-level programming interface, thereby simplifying the process of programming an assembly robot.the process of programming an assembly robot. However, to test this approach empirically requires a manipulator that is able to control the force that it applies, as well as being sensitive to environmental constraints. The inertial properties of standard industrial manipulators preclude them from exhibiting this kind of behaviour. In order to solve this problem we designed and constructed a three degree of freedom, planar, direct-drive arm that is open-loop force-controllable (with respect to its end-point), and inherently accommodating during contact.In order to demonstrate the forgiving nature of operation of our robot arm we imple¬ mented a generic crank turning program that is independent of the geometry of the crank involved, i.e. no knowledge is required of the location or length of the crank. I11 order to demonstrate the viability of our proposed approach to assembly we pro¬ grammed our robot system to perform some representative tasks; the insertion of a peg into a hole, and the rotation of a block into a corner. These programs were tested on parts of various size and material, and in various locations in order to illustrate their invariant nature.We conclude that the problem of spatial uncertainty is in fact an artefact of the fact that current industrial manipulators are designed to be position controlled. The work described in this thesis shows that assembly robots, when appropriately designed, controlled and programmed, can be the reliable and flexible devices they were always meant to be