92 research outputs found
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
Fifth-generation small cell backhaul capacity enhancement and large-scale parameter effect
The proliferation of handheld devices has continued to push the demand for higher data rates. Network providers will use small cells as an overlay to macrocell in fifth-generation (5G) for network capacity enhancement. The current cellular wireless backhauls suffer from the problem of insufficient backhaul capacity to cater to the new small cell deployment scenarios. Using the 3D digital map of Lagos Island in the Wireless InSite, small cells are deployed on a street canyon and in high-rise scenarios to simulate the backhaul links to the small cells at 28 GHz center frequency and 100 MHz bandwidth. Using a user-defined signal to interference plus noise ratio-throughput (SINR-throughput) table based on an adaptive modulation and coding scheme (MCS), the throughput values were generated based on the equation specified by 3GPP TS 38.306 V15.2.0 0, which estimates the peak data rate based on the modulation order and coding rate for each data stream calculated by the propagation model. Finding shows achieved channel capacity is comparable with gigabit passive optical networks (GPON) used in fiber to the ‘X’ (FTTX) for backhauling small cells. The effect of channel parameters such as root mean squared (RMS) delay spread and RMS angular spread on channel capacity are also investigated and explained
State-of-the-art assessment of 5G mmWave communications
Deliverable D2.1 del proyecto 5GWirelessMain objective of the European 5Gwireless project, which is part of the H2020 Marie Slodowska-
Curie ITN (Innovative Training Networks) program resides in the training and involvement of young
researchers in the elaboration of future mobile communication networks, focusing on innovative
wireless technologies, heterogeneous network architectures, new topologies (including ultra-dense
deployments), and appropriate tools. The present Document D2.1 is the first deliverable of Work-
Package 2 (WP2) that is specifically devoted to the modeling of the millimeter-wave (mmWave)
propagation channels, and development of appropriate mmWave beamforming and signal
processing techniques. Deliver D2.1 gives a state-of-the-art on the mmWave channel measurement,
characterization and modeling; existing antenna array technologies, channel estimation and
precoding algorithms; proposed deployment and networking techniques; some performance
studies; as well as a review on the evaluation and analysis toolsPostprint (published version
Recommended from our members
System design issues in dense urban millimeter wave cellular networks
Upcoming deployments of cellular networks will see an increasing use of millimeter wave (mmWave) frequencies, roughly between 20-100 GHz. The goal of this dissertation is to investigate some key design issues in dense urban mmWave cellular networks by developing mathematical models that are representative of these networks.
In the first contribution, stochastic geometry (SG) is used to study the per user rate performance of multi-user MIMO (MU-MIMO) in downlink mmWave cellular network incorporating the impact of a spatially sparse blockage dependent multipath channel and hybrid precoding. Performance of MU-MIMO is then compared with single-user beamforming and spatial multiplexing in different network scenarios considering coverage, rate and power consumption tradeoffs to suggest when to use which MIMO scheme.
The second contribution reconsiders a popular received signal power model used in system capacity analysis of MIMO wireless networks employing single user beamforming. A modification is suggested to the model by introducing a correction factor. An approximate analysis is done to justify incorporating such a factor and simulations are performed to validate it's importance. Although this contribution does not study a new system design issue for mmWave cellular, it highlights a shortcoming with using the popular received signal power model to study design issues in mmWave cellular networks.
The third and fourth contributions investigate resource allocation in self-backhauled mmWave cellular networks. In order to enable affordable initial deployments of mmWave cellular, self-backhauling is envisioned as a cost-saving solution. The third contribution investigates how to divide resources between uplink and downlink for access and backhaul in self-backhauled networks with single hop wireless backhauling. The performance of dynamic time division duplexing (TDD) and integrated access-backhaul (IAB) is compared with static TDD and orthogonal access backhaul (OAB) strategies using a SG based model. The last contribution of this dissertation addresses the following key question for self-backhauled networks. What is the maximum extended coverage area that a single fiber site can support using multi-hop relaying, while still achieving a minimum target per user data rate? The problem of maximizing minimum per user rates is studied considering a series of deployments with a single fiber site and varying number of relays. Several design guidelines for multi-hop mmWave cellular networks are provided based on the analytical and empirical results.Electrical and Computer Engineerin
Impact of Femtocell backhaul limitation on performance of Macro-Femto HetNet
This thesis is a techno-economical study which focuses on addressing the exponentially rising data capacity demand through network densification. The study is based on the two popular deployment strategies; Macrocellular networks and Macro-Femto heterogeneous networks, deployed in a suburban type environment with modern houses. The main aim of the dissertation is to investigate the impact of network densification on capacity, energy- and cost-efficiency of the network, while considering different femtocell backhaul connectivity limitations.
The network performance is evaluated for both indoor and outdoor scenarios. A comparative analysis between the macrocellular and macro-femto network is done by increasing the density of the macrocells, femtocells and the operating frequency spectrum. The capacity is enhanced by increasing the density of the cell sites in the network but operators want to generate profit and want to adopt a cost effective solution to cater the problems. The results show that increasing the density of low-cost, low-powered femtocell access points (FAPs) in the network can solve the problem of 1000x future data capacity demand while keeping the CAPEX and OPEX of the network relatively lower than legacy pure macrocellular deployments. The deployment of the FAPs both in indoor and outdoor environments enhances the network capacity.
This study helped in providing results, understanding and insight of both technical and techno-economical aspects of different mobile network deployment and densification solutions. Furthermore, the outcome of the thesis will give some guidelines for network vendors and mobile operators in evolving their network in future
Multi-band Wideband Channel Measurements in Indoor and Outdoor Environments above 6 GHz for 5G Networks
This document presented the results of ultra-wideband of multi-bands measurements performed in three different indoor environments such as large office, factory like and small office and one outdoor street canyon scenario at the science site of Durham University, United Kingdom. The measurements conducted using a wideband chirp sounder developed at Durham University. An analytical review of the radio wave propagation mechanisms and formulas is presented in addition to the background of the channel characteristics parameters and statistics. The parameters reviewed are the received signal strength, path loss, the excess, average and RMS delay spread, in addition to the angular parameters such as the angle of arrival (AoA), angle of departure (AoD) and the RMS angular spread. A literature survey for about 80 paper of the previous work are studied and summarised for the measurements and simulation performed to estimate different parameters in both indoor and outdoor scenarios.
Two different measurements set up were performed in three indoor environments and one outdoor scenario to measure mainly, the frequency dependency in various channel characteristics parameters. In the first set the measured parameters are the received signal strength, path loss, and the excess, average and the cumulative distribution function (CDF) and the RMS delay spread in three indoor environments. While in the second set the 3D angular parameters such as AoA, AoD and RMS angular spread in both Tx and Rx sides are studied in three indoor and one outdoor environment mentioned earlier. The measurements set up and procedures are presented for each set of measurement. The measurements were performed using a wideband channel sounder up to 6 GHz for both sets. Five different frequency bands (i.e.13.4 GHz, 26.8 GHz, 54.2 GHz, 62.6 GHz and 70 GHz) were used in the first set and three bands (i.e.13.4 GHz, 26.8 GHz, 62.6 GHz) for the second set. A steerable horn antenna at both side using 3D positioner in the second set of measurements, while an omnidirectional antenna was used at the receiver side in the first set. A summary and discussion the extracted results for each set of measurements are given. Conclusions about the achieved results and the recommended future work are provided
- …