Evaluation of a dielectric-only transmitarray for generating multi-focusing near-field spots using a cluster of feeds in the Ka-Band

A transmitarray antenna is evaluated to generate a multi-focusing spot area in the Fresnel region of the antenna in the Ka-band. The antenna is designed to focus the radiated field at a certain point using a central feeding configuration. The number of feeds is increased to create as many focusing spots as feeds. The feeds are placed along an arc defined in the principal planes of the transmitarray, radiating independent near-field spots and providing a solution with a wide-angle spot scanning without an antenna displacement and a high isolation between feeds. To validate this concept, a transmitarray based on dielectric-only cells is designed and simulated under full-wave conditions. Then, this design is manufactured using a 3D printing technique, and the prototype is measured in a planar acquisition range. Measurements are performed for different feed positions in order to validate the multi-focusing capability of the antenna. Measurements and simulations show a high agreement and validate the proposed design technique.info:eu-repo/semantics/publishedVersio

Technologies for Near-Field Focused Microwave Antennas

This paper provides a review spanning different technologies used to implement near-field focused antennas at the microwave frequency band up to a few tens of GHz: arrays of microstrip patches and printed dipoles, arrays of dielectric resonator antennas, reflectarrays, transmitarrays, Fresnel zone plate lenses, leaky-wave antennas, and waveguide arrays

Spot Focusing Coma Correction by Linearly Polarized Dual-Transmitarray Antenna in the Terahertz Region

Focus scanning is critically important in many terahertz (THz) imaging and sensing applications. A traditional single focusing transmitarray can achieve a good focus when the source is on-axis but moving the source off-axis produces a significant aberration. This paper presents a novel approach to reducing coma in off-axis scanning in the THz region. Here, a dual transmitarray solution is proposed, in which a transmitarray with an optimized phase profile is placed behind a regular phase profile transmitarray. A linearly polarized, dual-transmitarray antenna was fabricated for validation, and the focusing performances were experimentally characterized. The measured results are in good agreement with the theoretical ones. The generated spot of the dual-transmitarray antenna remains focused on an angle up to 50deg, with a -3 dB spot size of less than 4 mm at 290 GHz. The measured near-field sidelobes are all below -10 dB within the whole scanning range.Comment: 9 pages, 14 figure

ELECTRONICAL LY RECONFIGURABLE FS S - INSPIRED TRANSMITARRAY FOR TWO DIMENS IONAL BEAMSTEERING FOR 5G ANDRADAR APPL ICATIONS AT 2 8 GHZ

In this dissertation, the author’s work on a 28 GHz transmitarray capable of antenna beamsteering for various wireless applications, is presented. Such device allows for the adjustment of the radiation pattern of an antenna by changing its main lobe direction, without the need of any mechanical means. A unit-cell based on a square-slot Frequency Selective Surface (FSS) is designed, simulated and optimised through several full-wave simulations, using an electromagnetic solver (CST MWS). Subsequently, the unit-cell was extended to a 10x10 array configuration in order to enable Two-dimensional (2D) beamsteering. This work yielded the fabrication of a prototype composed of four passive transmitarray lens, which were experimentally tested and characterised. Finally, a novel unit-cell based on a double square-slot intended aiming at active beamsteering was also studied and optimised in simulation environment. From this work, it was demonstrated that transmitarray can be seen as feasible alternative to many traditional beamsteering techniques, such as phased antenna arrays, while reducing the RF burden of the overall system using only a single radiation source. This fact, allied with it’s ease of integration, reduced cost and low-profile characteristics make transmitarrays a desirable solution for 5G and RADAR applications, among others

Circularly polarized and reconfigurable frequency selective surface based transmit array antenna for x-band applications

Transmitarray (TA) antennas have attracted much attention in recent years due to their number of applications. These include the 5G/6G mobile networks and satellite communication systems for the microwave frequency range. The various satellite applications require high-gain antennas with polarization agility. Also, the state-ofthe- art smart communication systems require reconfigurable antennas allowing the frequency and beam switching according to the application requirements. In this research, three different TA antennas have been studied and designed for X-band applications which are high gain and wideband TA antenna, circularly polarized TA antenna, frequency and beam reconfigurable TA antenna. For the first design, two Frequency-Selective Surface (FSS) unit cells which include Double Square Ring with Center Patch (DSR-CP) and Split Ring Resonator (SRR), have been applied to increase the antenna gain and bandwidth. The optimized unit cell structure shows that a fourlayer configuration could provide maximum phase range with low insertion losses. The complete DSR-CP TA consisting of 121 elements has produced an impedance bandwidth of 33.3% with a peak gain value of 20.4 dBi and 1-dB gain for bandwidth of 10%. SRR-based TA achieved the impedance bandwidth of 35% with a peak gain value of 21.9 dBi and 11.6% 1-dB gain bandwidth. A circularly polarized TA using a Meander Line Polarizer (MLP) superstrate has been studied and presented. The MLP unit cell was simulated and optimized at 12 GHz, having 900 phase difference between the two orthogonal E-field components, Ex and Ey. The final prototype measurement results show that a low axial ratio of 1.89 and 20.17 dBi gain at 11.2 GHz has been obtained. Finally, the last part of the research focused on the frequency and beam reconfigurable TA antenna. A U-shape superstrate layer has been added to introduce frequency selectivity in front of the horn antenna that acts as a bandpass filter. Then, by varying the strip length of the U-shape unit cell, the antenna frequency can be reconfigured from 8.5 GHz to 11.2 GHz. On the other hand, a new active TA unit cell equipped with four switchable strips using Positive Intrinsic Negative (PIN) diodes has been employed to achieve beam reconfigurable TA antenna. Thus, the antenna beam can be tilted by controlling the PIN diodes ON and OFF switching states. Results show that a full-beam switching range of 43.20 has been obtained. In conclusion, this research has successfully presented three new TA antenna designs, which are highly potential for the X-band applications

Reconfigurable Reflectarrays and Array Lenses for Dynamic Antenna Beam Control: A Review

Advances in reflectarrays and array lenses with electronic beam-forming capabilities are enabling a host of new possibilities for these high-performance, low-cost antenna architectures. This paper reviews enabling technologies and topologies of reconfigurable reflectarray and array lens designs, and surveys a range of experimental implementations and achievements that have been made in this area in recent years. The paper describes the fundamental design approaches employed in realizing reconfigurable designs, and explores advanced capabilities of these nascent architectures, such as multi-band operation, polarization manipulation, frequency agility, and amplification. Finally, the paper concludes by discussing future challenges and possibilities for these antennas.Comment: 16 pages, 12 figure

An Ultrathin 2-bit Near-Field Transmitarray Lens

A novel ultra-thin Near-Field 2-bit 24x24-element transmitarray lens working at X-Band is presented in this letter. The aim of this antenna is to focus in a point located in the Near-Field without using any complex feeding network. In order to obtain a planar lens with a very low profile, a 2-bit-design approach is used to diminish the number of layers used in the structure. The simulations have been done using a model based on the concept that the Near-Field of an array can be calculated as the sum of the Far-Field contributions of every single one of its elements. These are considered as plane apertures over which the tangential electric field is constant. In order to validate the results of this model, they are compared with both those obtained with a full-wave commercial software and those from measurements. Thus, a Near-Field-antenna is manufactured and measured showing the measurements good concordance with the results of the mode

Antenna Design for 5G and Beyond

With the rapid evolution of the wireless communications, fifth-generation (5G) communication has received much attention from both academia and industry, with many reported efforts and research outputs and significant improvements in different aspects, such as data rate speed and resolution, mobility, latency, etc. In some countries, the commercialization of 5G communication has already started as well as initial research of beyond technologies such as 6G.MIMO technology with multiple antennas is a promising technology to obtain the requirements of 5G/6G communications. It can significantly enhance the system capacity and resist multipath fading, and has become a hot spot in the field of wireless communications. This technology is a key component and probably the most established to truly reach the promised transfer data rates of future communication systems. In MIMO systems, multiple antennas are deployed at both the transmitter and receiver sides. The greater number of antennas can make the system more resistant to intentional jamming and interference. Massive MIMO with an especially high number of antennas can reduce energy consumption by targeting signals to individual users utilizing beamforming.Apart from sub-6 GHz frequency bands, 5G/6G devices are also expected to cover millimeter-wave (mmWave) and terahertz (THz) spectra. However, moving to higher bands will bring new challenges and will certainly require careful consideration of the antenna design for smart devices. Compact antennas arranged as conformal, planar, and linear arrays can be employed at different portions of base stations and user equipment to form phased arrays with high gain and directional radiation beams. The objective of this Special Issue is to cover all aspects of antenna designs used in existing or future wireless communication systems. The aim is to highlight recent advances, current trends, and possible future developments of 5G/6G antennas