1,101 research outputs found

    Substrate Integrated Coaxial Filters with Fixed and Tunable Responses

    Full text link
    Wireless and mobile communications are already playing an important role in our lives, and this will can only grow more and more due to the predominant importance and use of modern smartphones, tablets and any kind of connected devices. With this is mind, the spectrum for wireless and mobile communications is becoming incredibly overcrowded, leading to increasing requirements for RF front-end filters. This progress has encouraged an impressive need for developing low-cost, high performance, mass-producible, small footprint, and highly integrated front-end solutions for microwave and millimeter-wave systems and applications including emerging 5G and future wireless platforms. In this context, high quality factor resonators are usually typical basic building blocks of many high performance passive and active circuits, and its design has become even more challenging in the last decade. As a result, Substrate Integrated Waveguide (SIW) technology has attracted scientific community and industry attention as a very good candidate for developing such desired high-Q planar microwave devices. Recently, SIW is demonstrating to be a successful approach for implementing microwave and mm-wave filters with high Q-factor, easy integration with other planar circuits, and for mass-production manufacturing processes in many technologies (i.e. Printed Circuit Board (PCB) and Low Temperature Co-fired Ceramics (LTCC) technologies among them). Its enormous similarity with waveguides is probably one of the main reasons why the development of SIW-based components and circuits is rapidly growing among the research community. Other potential features that, combined with the former advantages, could be of huge interest in a wide range of wireless and mobile applications are a lively set of research subjects, such as compactness, advanced filtering responses, and recently frequency-agility capabilities. These key features have been recently introduced in the design of microwave filters for the next-generation wireless systems. Taking into account the above-mentioned background, the work carried out during the course of this PhD Thesis has been directed towards a further study of SIW technology to propose, analyze and develop an innovative and original resonator topology. The proposed topology is based on the extension of the classical coaxial waveguide resonator to SIW technology, and must take advantage of the characteristics of SIW devices to allow the design of improved and innovative microwave resonator filters for advanced wireless systems. This PhD Thesis includes the latest improvements made on this topic, from the working principles of the basic coaxial SIW block, until different applications for the design of compact quasi-elliptic and reconfigurable microwave filters. The results are promising and demonstrate the validity of the proposed topology for the design of high-Q microwave filters, as well as its potential application to implement complex designs. The general knowledge gained from these cases of study can be considered a good base for further developing this technology, which can help to improve its EM performance, and also contribute to a more general use in the market.Las comunicaciones inalámbricas y móviles juegan un papel importante en nuestras vidas, y esto sólo puede ir a más debido a su enorme importancia y al uso de los modernos teléfonos inteligentes (del inglés, smartphones), tabletas y toda clase de dispositivos inalámbricos. Con todo esto en mente, el espectro electromagnético para comunicaciones inalámbricas y móviles se está saturando cada día más, lo que conlleva un constante aumento de los requisitos para los filtros de radio-frecuencia usados en las cabeceras de dichos sistemas. Este progreso ha llevado a un creciente interés en desarrollar componentes de microondas de bajo coste, alto rendimiento, pequeño tamaño, que permitan implementar soluciones altamente integradas para sistemas de alta frecuencia (i.e. microondas y ondas milimétrica) y sus aplicaciones, incluyendo entre ellas la emergente conexión 5G y las futuras plataformas inalámbricas. En este contexto, los resonadores de elevado factor de calidad constituyen generalmente los bloques básicos para el diseño de muchos circuitos pasivos (entre ellos filtros) y activos de alto rendimiento. Su diseño se ha convertido por tanto en un reto aún mayor en la última década. Como resultado de ello, la tecnología de guía de ondas integradas en substrato (Substrate Integrated Waveguide, SIW) ha atraído la atención de la comunidad científica e industrial, al revelarse como una buena aproximación para el desarrollo de dispositivos planares de microondas con excelentes prestaciones eléctricas, y en particular para la implementación de filtros de microondas y onda milimétrica de bajas pérdidas y elevada integración con circuitos en tecnología planar. Además, su flexibilidad se caracteriza también por su adecuación a diferentes procesos de fabricación y producción en masa, en tecnologías tales como los circuitos impresos (Printed Circuit Board, PCB) o la tecnología de materiales cerámicos multi-capa co-sinterizados a baja temperatura (Low Temperature Co-fired Ceramics, LTCC) entre otras. Su enorme similitud con las ya largamente estudiadas guías de onda es, probablemente, una de las principales razones por las cuales el desarrollo de dicho circuitos está creciendo rápidamente entre la comunidad de investigadores. Cabe mencionar como, además de las anteriores ventajas, otras características de la tecnología SIW que podrían ser de gran interés en una amplia gama de aplicaciones inalámbricas y móviles son la miniaturización, la posibilidad de implementar respuestas avanzadas de filtrado y, recientemente, las capacidades de sintonía en frecuencia de los componentes de microondas. De este modo, el trabajo desarrollado a lo largo de esta Tesis Doctoral se ha orientado hacia el planteamiento, análisis y desarrollo de una topología de resonador innovadora y original. Dicha topología se basa en una extensión de las cavidades coaxiales en guía de onda metálica a una implementación integrada en substrato inspirada en la tecnología SIW. Esta Tesis Doctoral recapitula los últimos avances que se han producido sobre este tema, empezando desde la descripción de los principios fundamentales de funcionamiento de las estructuras, hasta la demostración de varias aplicaciones concretas útiles para el diseño de filtros de microondas muy compactos, con respuestas filtrantes avanzadas y reconfigurables. Los resultados que se van a mostrar a continuación son prometedores, y demuestran la validez de la topología propuesta. El conocimiento general obtenido de los diferentes prototipos fabricados y caracterizados experimentalmente puede considerarse una buena base para seguir desarrollando esta tecnología, lo que puede ayudar a mejorar su rendimiento electromagnético, así como a contribuir a un uso más extendido de estos dispositivos en el mercado.Les comunicacions sense fils i mòbils juguen un paper important en les nostres vides, i això només pot anar a més a causa de la gran importància i l'ús dels moderns telèfons intel·ligents (de l'anglès, smartphones), tablets i tota classe de dispositius sense fil. Tenint en compte tot açò, l'espectre electromagnètic per a comunicacions sense fils i mòbils s'està saturant cada dia més, el que comporta un constant augment dels requisits per als filtres de radiofreqüència usats en les capçaleres d'aquests sistemes. Aquest progrés ha portat a un creixent interès en desenvolupar components de microones de baix cost, alt rendiment, volum reduït, que permeten implementar solucions altament integrades per a sistemes d'alta freqüència (ie. microones i ones mil·limètriques) i les seves aplicacions, incloent l'emergent connexió 5G i les futures plataformes sense fils. En aquest context, els ressonadors d'elevat factor de qualitat constitueixen generalment els blocs bàsics per al disseny de molts circuits passius (entre ells filtres) i actius d'alt rendiment. El seu disseny s'ha convertit per tant en un repte encara més gran en l'última dècada. Com a resultat d'això, la tecnologia de guia d'ones integrades en substrat (Substrate Integrated Waveguide, SIW) ha atret l'atenció de la comunitat científica i industrial, al revelar-se com una bona aproximació per al desenvolupament de dispositius planars de microones amb excel·lents prestacions elèctriques , i en particular per a la implementació de filtres de microones i ones mil·limètriques de baixes pèrdues i elevada integració amb circuits en tecnologia planar. A més, la seua flexibilitat es caracteritza també per la seua adequació a diferents processos de fabricació i producció en massa, en tecnologies com ara els circuits impresos (Printed Circuit Board, PCB) o la tecnologia de materials ceràmics multicapa co-sinteritzats a baixa temperatura (Low Temperature Co-Fired Ceramics, LTCC) entre d'altres. La seua enorme similitud amb les ja llargament estudiades guies d'ona és, probablement, una de les principals raons per les quals el desenvolupament d'aquests circuits està creixent ràpidament entre la comunitat d'investigadors. Cal destacar com, a més de les anteriors avantatges, altres característiques de la tecnologia SIW que podrien ser de gran interès en una àmplia gamma d'aplicacions sense fils i mòbils són la miniaturització, la possibilitat d'implementar respostes avançades de filtrat i, recentment, les capacitats de sintonia en freqüència dels components de microones. Aquestes característiques clau s'han introduït recentment en el disseny de filtres microones per als sistemes sense fils de pròxima generació, convertint-se en objecte prioritari d'estudi per part de la comunitat científica. D'aquesta manera, el treball desenvolupat al llarg d'aquesta tesi doctoral s'ha orientat cap al plantejament, anàlisi i desenvolupament d'una topologia de ressonador innovadora i original. Aquesta topologia es basa en una extensió de les cavitats coaxials en guia d'ona metàl·lica a una implementació integrada a substrat inspirada en la tecnologia SIW. Aquesta tesi doctoral recapitula els últims avanços que s'han produït sobre aquest tema, començant des de la descripció dels principis fonamentals de funcionament de les estructures, fins a la demostració de diverses aplicacions concretes útils per al disseny de filtres i microones molt compactes, amb respostes de filtrat avançades i reconfigurables. Els resultats que es mostraran a continuació són prometedors, i demostren la validesa de la topologia proposada. El coneixement general obtingut dels diferents prototips fabricats i caracteritzats experimentalment es pot considerar com una bona base per seguir desenvolupant aquesta tecnologia, el que pot ajudar a millorar el seu rendiment electromagnètic, així com a contribuir a un ús més estès d'aquests dispositius en el merSirci, S. (2017). Substrate Integrated Coaxial Filters with Fixed and Tunable Responses [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/78838TESI

    1.05-GHz CMOS Oscillator Based on Lateral-Field-Excited Piezoelectric AlN Contour-Mode MEMS Resonators

    Get PDF
    This paper reports on the first demonstration of a 1.05-GHz microelectromechanical (MEMS) oscillator based on lateral-field-excited (LFE) piezoelectric AlN contour-mode resonators. The oscillator shows a phase noise level of −81 dBc/Hz at 1-kHz offset frequency and a phase noise floor of −146 dBc/Hz, which satisfies the global system for mobile communications (GSM) requirements for ultra-high frequency (UHF) local oscillators (LO). The circuit was fabricated in the AMI semiconductor (AMIS) 0.5-μm complementary metal-oxide-semiconductor (CMOS) process, with the oscillator core consuming only 3.5 mW DC power. The device overall performance has the best figure-of-merit (FoM) when compared with other gigahertz oscillators that are based on film bulk acoustic resonator (FBAR), surface acoustic wave (SAW), and CMOS on-chip inductor and capacitor (CMOS LC) technologies. A simple 2-mask process was used to fabricate the LFE AlN resonators operating between 843 MHz and 1.64 GHz with simultaneously high Q (up to 2,200) and kt2 (up to 1.2%). This process further relaxes manufacturing tolerances and improves yield. All these advantages make these devices suitable for post-CMOS integrated on-chip direct gigahertz frequency synthesis in reconfigurable multiband wireless communications

    Planar microwave filters with electronically tunability and other novel configurations

    Get PDF
    In order to meet the increasing demands of advance wireless communications and radar systems, several novel types of bandpass filters and bandstop filters have been developed in this thesis. A new type of varactor-tuned dual-mode bandpass filters have been presented to achieve a nearly constant absolute bandwidth over a wide tuning range by using a single DC bias circuit. Since the two operating modes (i.e., the odd and even modes) in a dualmode microstrip open-loop resonator do not couple to each other, tuning the passband frequency is accomplished by merely changing the two modal frequencies proportionally. Design equations and procedures are derived, and two two-pole tunable bandpass filters and a four-pole tunable bandpass filter of this type are demonstrated experimentally. Miniature microstrip doublet dual-mode filters that exhibit quasi-elliptic function response without using any cross coupling have been developed. It shows that a single two-pole filter or the doublet can produce two transmission zeros resulting from a double behaviour of the dual-mode resonator of this type. Electromagnetic (EM) simulation and experiment results of the proposed filters are described. Parallel feed configuration of a microstrip quasi-elliptic function bandpass filter has been built with a pair of open-loop dual-mode resonators. By employing this new coupling scheme, a novel filter topology with three-pole quasi-elliptic function frequency response can be obtained, leading to good passband performance, such as low insertion loss and good matching at the mid-band of passband. A designed three-pole bandpass filter of this type is demonstrated experimentally. A new class of dual-band filters based on non-degenerate dual-mode microstrip slow-wave open-loop resonators, which support two non-degenerate modes that do not couple, have been introduced. Different feed schemes that affect the filtering characteristics are investigated. Examples of dual-band filters of this type are described with simulation and experiment results. iii In order to achieve a wide spurious-free upper passband, a novel design of bandstop filter with cancellation of first spurious mode by using coupled three-section step impedance resonators (SIRs) has been developed. This cancellation occurs when two transmission poles coincide with the first spurious mode (transmission zero) by properly choosing the step impedance ratio and the gap between the SIR and the main transmission line. A stripline bandstop filter and a microstrip bandstop filter of this type are designed, fabricated and tested. As a preliminary investigation, the microstrip filter is tuned electronically using ferroelectric thin film varactors

    Phononic Crystal Resonators

    Get PDF
    In this chapter we present the theory of phononic crystal, classification of PnC according to its physical nature, and phononic crystal (PnC) phenomena in locally resonant materials with 2D, and 3D crystals structure. In this chapter, phononic crystal (PnC) micro-electro mechanical system (MEMS) resonators with different transduction schemes such as electrostatically, piezoresistively, piezoelectrically transduced MEMS resonators are explained. In this chapter, we employed phononic crystal strip in MEMS resonators is explained to reduce anchor loss, and analysis of eigen frequency mode of the resonators. The phononic crystal strip with supporting tethers is designed to see the formation of band gap by introducing square holes, and improvement of quality factor and harmonic response. We show that holes can help to reduce the static mass of PnC strip tether without affecting on band gaps

    Miniaturized High-Q Tunable RF Filters

    Get PDF
    This dissertation focuses on the investigation and development of novel efficient tuning techniques and the design of miniaturized high-Q tunable RF filters for high-performance reconfigurable systems and applications. First, a detailed survey of the available tuning concepts and state-of-art tunable filters is provided. Then, a novel so-called inset resonator configuration is presented for the applications of fixed and tunable coaxial filters. The design procedure of frequency tunable filters with constant absolute bandwidth (CABW) is described, and various tunable inset filters are implemented, offering many desirable merits, including the wide tuning range and stable high-Q with minimum variation. For wide octave frequency tuning ranges with CABW, a second novel concept is presented using so-called re-entrant caps tuners. Beside simplicity and compactness, this technique also features enhanced spurious performance and wider tuning capabilities than the conventional means. Also, in this dissertation, various miniaturized reconfigurable dual-band/dual-mode bandpass filters and diplexers are presented using compact dual-mode high-Q TM-mode dielectric resonators. Furthermore, a novel microfluidic-based ultra-wide frequency tuning technique for TM010-mode dielectric resonators and filters is introduced in this dissertation. In addition to the very wide tuning window, this mechanism has key advantages of low-cost, simplicity, and intrinsic switch-off. Lastly, the dissertation includes a novel bandwidth reconfiguration concept with multi-octave tuning using a single element for coaxial bandpass filters. This mechanism brings many features including the fast tuning, constant high-Q, intrinsic switch-off, and wide BW-reconfiguration

    MACHINE LEARNING AUGMENTATION MICRO-SENSORS FOR SMART DEVICE APPLICATIONS

    Get PDF
    Novel smart technologies such as wearable devices and unconventional robotics have been enabled by advancements in semiconductor technologies, which have miniaturized the sizes of transistors and sensors. These technologies promise great improvements to public health. However, current computational paradigms are ill-suited for use in novel smart technologies as they fail to meet their strict power and size requirements. In this dissertation, we present two bio-inspired colocalized sensing-and-computing schemes performed at the sensor level: continuous-time recurrent neural networks (CTRNNs) and reservoir computers (RCs). These schemes arise from the nonlinear dynamics of micro-electro-mechanical systems (MEMS), which facilitates computing, and the inherent ability of MEMS devices for sensing. Furthermore, this dissertation addresses the high-voltage requirements in electrostatically actuated MEMS devices using a passive amplification scheme. The CTRNN architecture is emulated using a network of bistable MEMS devices. This bistable behavior is shown in the pull-in, the snapthrough, and the feedback regimes, when excited around the electrical resonance frequency. In these regimes, MEMS devices exhibit key behaviors found in biological neuronal populations. When coupled, networks of MEMS are shown to be successful at classification and control tasks. Moreover, MEMS accelerometers are shown to be successful at acceleration waveform classification without the need for external processors. MEMS devices are additionally shown to perform computing by utilizing the RC architecture. Here, a delay-based RC scheme is studied, which uses one MEMS device to simulate the behavior of a large neural network through input modulation. We introduce a modulation scheme that enables colocalized sensing-and-computing by modulating the bias signal. The MEMS RC is tested to successfully perform pure computation and colocalized sensing-and-computing for both classification and regression tasks, even in noisy environments. Finally, we address the high-voltage requirements of electrostatically actuated MEMS devices by proposing a passive amplification scheme utilizing the mechanical and electrical resonances of MEMS devices simultaneously. Using this scheme, an order-of-magnitude of amplification is reported. Moreover, when only electrical resonance is used, we show that the MEMS device exhibits a computationally useful bistable response. Adviser: Dr. Fadi Alsalee

    Ultra-Low Power Wake Up Receiver For Medical Implant Communications Service Transceiver

    Get PDF
    This thesis explores the specific requirements and challenges for the design of a dedicated wake-up receiver for medical implant communication services equipped with a novel “uncertain-IF†architecture combined with a high – Q filtering MEMS resonator and a free running CMOS ring oscillator as the RF LO. The receiver prototype, implements an IBM 0.18μm mixed-signal 7ML RF CMOS technology and achieves a sensitivity of -62 dBm at 404MHz while consuming \u3c100 μW from a 1 V supply
    • …
    corecore