3,909 research outputs found
Behavioral Modelling of Digital Devices Via Composite Local-Linear State-Space Relations
This paper addresses the generation of accurate and efficient behavioral models of digital ICs. The proposed approach is based on the approximation of the device port characteristics by means of composite local linear state-space relations whose parameters can effectively be estimated from device port transient responses via well-established system identification techniques. The proposedmodels have been proven to overcome some inherent limitations of the state-of-the-art models used so far, and they can effectively be implemented in any commercial tool as Simulation Program with Integrated Circuit Emphasis (SPICE) subcircuits or VHDL-AMS hardware descriptions. A systematic study of the performances of the proposed state-space models is carried out on a synthetic test device. The effectiveness of the proposed approach has been demonstrated on a real application problem involving commercial devices and a data link of a mobile phon
Development of reliability methodology for systems engineering. Volume II - Application - Design reliability analysis of a 250 volt-ampere static inverter Final report
Design stage reliability analysis application to static inverte
Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design
This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis.
First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise.
The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling.
In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.Siirretty Doriast
Analysis and Design of High Speed Serial Interfaces for Automotive Applications
The demand for an enriched end-user experience and increased performance in next generation
electronic applications is never ending, and it is a common trend for a wide spectrum
of applications owing to different markets, like computing, mobile communication and automotive.
For this reason High Speed Serial Interface have become widespread components for
nowadays electronics with a constant demand for power reduction and data rate increase.
In the frame of gigabit serial systems, the work discussed in this thesis develops in two
directions: on one hand, the aim is to support the continuous data rate increase with the
development of novel link modeling approaches that will be employed for system level evaluation
and as support in the design and characterization phases. On the other hand, the
design considerations and challenges in the implementation of the transmitter, one of the
most delicate blocks for the signal integrity performance of the link, are central.
The first part of the activity regarding link performance predictions lead to the development
of an enhanced statistical simulation approach, capable to account for the transmitter
waveform shape in the ISI analysis, a characteristic that is missed by the available state-ofthe-
art simulation approaches. The proposed approach has been extensively tested by comparison
with traditional simulation approaches (Spice-like simulators) and validated against
experimental characterization of a test system, with satisfactory results.
The second part of the activity consists in the design of a high speed transmitter in a
deeply scaled CMOS technology, spanning from the concept of the circuit, its implementation
and characterization. Targets of the design are to achieve a data rate of 5 Gb/s with
a minimum voltage swing of 800 mV, thus doubling the data rate of the current transmitter
implementation, and reduce the power dissipation adopting a voltage mode architecture.
The experimental characterization of the fabricated lot draws a twofold picture, with some
of the performance figures showing a very good qualitative and quantitative agreement with
pre-silicon simulations, and others revealing a poor performance level, especially for the eye
diagram. Investigation of the root causes by the analysis of the physical silicon design, of the
bonding scheme of the prototypes and of the pre-silicon simulations is reported. Guidelines
for the redesign of the circuit are also given.Nel panorama delle applicazioni elettroniche il miglioramento delle performance di un prodotto
da una generazione alla successiva ha lo scopo di offrire all\u2019utilizzatore finale nuove
funzioni e migliorare quelle esistenti. Negli ultimi anni grazie al costante avanzamento della
tecnologia integrata, si \ue8 assistito ad un enorme sviluppo della capacit\ue0 computazionale dei
dispositivi in tutti i segmenti di mercato, quali ad esempio l\u2019information technology, la comunicazione
mobile e l\u2019automotive. La conseguente necessit\ue0 di mettere in comunicazione
dispostivi diversi all\u2019interno della stessa applicazione e di traferire grosse quantit\ue0 di dati ha
provocato una capillare diffusione delle interfacce seriali ad alta velocit\ue0, o High Speed Serial
Interfaces (HSSIs). La necessit\ue0 di ridurre il consumo di potenza e aumentare il bit rate per
questo tipo di applicazioni \ue8 diventata dunque un ambito di ricerca di estremo interesse.
Il lavoro discusso in questa tesi si colloca nell\u2019ambito della trasmissione di dati seriali a
bit rate superiori ad 1Gb/s e si sviluppa in due direzioni: da un lato, a sostegno del continuo
aumento del bit rate nelle nuove generazioni di interfacce, \ue8 stato affrontato lo sviluppo di
nuovi approcci di modellazione del sistema, che possano essere impiegati nella valutazione
delle prestazioni dell\u2019interfaccia e a supporto delle fasi di progettazione e di caratterizzazione.
Dall\u2019altro lato, si \ue8 focalizzata l\u2019attenzione sulle sfide e sulle problematiche inerenti il progetto
di uno dei blocchi pi\uf9 delicati per le prestazioni del sistema, il trasmettitore.
La prima parte della tesi ha come oggetto lo sviluppo di un approccio di simulazione
statistico innovativo, in grado di includere nell\u2019analisi degli effetti dell\u2019interferenza di intersimbolo
anche la forma d\u2019onda prodotta all\u2019uscita del trasmettitore, una caratteristica che
non \ue8 presente in altri approcci di simulazione proposti in letteratura. La tecnica proposta
\ue8 ampiamente testata mediante il confronto con approcci di simulazione tradizionali (di tipo
Spice) e mediante il confronto con la caratterizzazione sperimentale di un sistema di test, con
risultati pienamente soddisfacenti.
La seconda parte dell\u2019attivit\ue0 riguarda il progetto di un trasmettitore integrato high speed
in tecnologia CMOS a 40nm e si estende dallo studio di fattibilit\ue0 del circuito fino alla sua
realizzazione e caratterizzazione. Gli obiettivi riguardano il raggiungimento di un bit rate
pari a 5 Gb/s, raddoppiando cos\uec il bit rate dell\u2019attuale implementazione, e di una tensione
differenziale di uscita minima di 800mV (picco-picco) riducendo allo stesso tempo la potenza
dissipata mediante l\u2019adozione di una architettura Voltage Mode. I risultati sperimentali
ottenuti dal primo lotto fabbricato non delineano un quadro univoco: alcune performance
mostrano un ottimo accordo qualitativo e quantitativo con le simulazioni pre-fabbricazione,
mentre prestazioni non soddisfacenti sono state ottenute in particolare per il diagramma ad
occhio. Grazie all\u2019analisi del layout del prototipo, del bonding tra silicio e package e delle
simulazioni pre-fabbricazione \ue8 stato possibile risalire ai fattori responsabili del degrado delle
prestazioni rispetto alla previsioni pre-fabbricazione, permettendo inoltre di delineare le
linee guida da seguire nella futura progettazione di un nuovo prototipo
Locally-Stable Macromodels of Integrated Digital Devices for Multimedia Applications
This paper addresses the development of accurate and efficient behavioral models of digital integrated circuits for the assessment of high-speed systems. Device models are based on suitable parametric expressions estimated from port transient responses and are effective at system level, where the quality of functional signals and the impact of supply noise need to be simulated. A potential limitation of some state-of-the-art modeling techniques resides in hidden instabilities manifesting themselves in the use of models, without being evident in the building phase of the same models. This contribution compares three recently-proposed model structures, and selects the local-linear state-space modeling technique as an optimal candidate for the signal integrity assessment of data links. In fact, this technique combines a simple verification of the local stability of models with a limited model size and an easy implementation in commercial simulation tools. An application of the proposed methodology to a real problem involving commercial devices and a data-link of a wireless device demonstrates the validity of this approac
- …