Theory and practice of reversing control on multiply-articulated vehicles

A path-tracking controller is presented for automating the reversing of multiply-articulated vehicles. This uses a state feedback approach and steers the wheels of the front axle to ensure that the rearmost vehicle unit tracks a specified path. Linear closed-loop analysis is performed and shows that the controller is stable for vehicles with up to six trailers. The controller is implemented on three full-size experimental heavy vehicles: a ‘tractor–semitrailer’, a ‘B-double’ vehicle and a ‘B-triple’ vehicle, which have one trailer, two trailers and three trailers respectively. Experimental results are presented and the controller performance is evaluated. All test vehicles were able to track the paths to within 400 mm of the desired path. This research was funded by the Engineering and Physical Sciences Research Council (EPSRC) and Volvo Trucks through an Industrial CASE award. The authors would like to acknowledge Leo Laine and Carl-Johan Hoel from Volvo Trucks for their collaboration and contributions to the research.This is the author accepted manuscript. The final version is available from Sage via http://dx.doi.org/10.1177/095440701559691

Development of rear-end collision avoidance in automobiles

The goal of this work is to develop a Rear-End Collision Avoidance System for automobiles. In order to develop the Rear-end Collision Avoidance System, it is stated that the most important difference from the old practice is the fact that new design approach attempts to completely avoid collision instead of minimizing the damage by over-designing cars. Rear-end collisions are the third highest cause of multiple vehicle fatalities in the U.S. Their cause seems to be a result of poor driver awareness and communication. For example, car brake lights illuminate exactly the same whether the car is slowing, stopping or the driver is simply resting his foot on the pedal. In the development of Rear-End Collision Avoidance System (RECAS), a thorough review of hardware, software, driver/human factors, and current rear-end collision avoidance systems are included. Key sensor technologies are identified and reviewed in an attempt to ease the design effort. The characteristics and capabilities of alternative and emerging sensor technologies are also described and their performance compared. In designing a RECAS the first component is to monitor the distance and speed of the car ahead. If an unsafe condition is detected a warning is issued and the vehicle is decelerated (if necessary). The second component in the design effort utilizes the illumination of independent segments of brake lights corresponding to the stopping condition of the car. This communicates the stopping intensity to the following driver. The RECAS is designed the using the LabVIEW software. The simulation is designed to meet several criteria: System warnings should result in a minimum load on driver attention, and the system should also perform well in a variety of driving conditions. In order to illustrate and test the proposed RECAS methods, a Java program has been developed. This simulation animates a multi-car, multi-lane highway environment where car speeds are assigned randomly, and the proposed RECAS approaches demonstrate rear-end collision avoidance successfully. The Java simulation is an applet, which is easily accessible through the World Wide Web and also can be tested for different angles of the sensor

Implementation of Reversing Control on a Doubly Articulated Vehicle

The problem of reversing vehicles with two trailers could be solved with a semi-autonomous assistance system for automatically steering the vehicle. In the literature found, no controllers have been implemented on a full-size vehicle with two trailers. In this paper, two simple path-tracking controllers are presented for automating the reversing of a “B-double” vehicle, consisting of a tractor and two trailers. One of the controllers is a heuristic “preview point” controller; the other uses a state feedback approach. The controllers steer the wheels on the front axle so as to stabilize the vehicle in reverse and control the path of the rearmost axle to follow a prescribed path. A tuning strategy is outlined where both controllers are tuned using the linear quadratic regulator and have the same closed-loop poles. The two controllers are implemented on a full-size B-double test vehicle. Experimental results are discussed, and the controller performances are evaluated against criteria. With the state feedback controller, the test vehicle was able to track target paths, consisting of a roundabout and a lane change, to within 50 mm.This research was funded by the Engineering and Physical Sciences Research Council (EPSRC) and Volvo Trucks through an Industrial CASE award. The authors would like to acknowledge Leo Laine and Carl-Johan Hoel from Volvo Trucks for their collaboration and contributions to the research. The authors would like to acknowledge Denby Transport for their loan of the ‘Extra’ Eco-Link B-trailer for use in vehicle testing. The authors would like to acknowledge the members of the CVDC who supported the work in this paper. At the time of writing, the Consortium consisted of the University of Cambridge with the following partners from the heavy vehicle industry: Anthony Best Dynamics, Camcon, Denby Transport, Firestone Air Springs, GOODYEAR DUNLOP, Haldex, Motor Industry Implementation of Reversing Control on a Doubly-Articulated Vehicle 15 Research Association, SDC Trailers, SIMPACK, Tinsley Bridge, Tridec, Volvo Trucks, and Wincanton

Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving)

[EN] Nowadays, there are many electronic products that incorporate elements and features coming from the research in the field of mobile robotics. For instance, the well-known vacuum cleaning robot Roomba by iRobot, which belongs to the field of service robotics, one of the most active within the sector. There are also numerous autonomous robotic systems in industrial warehouses and plants. It is the case of Autonomous Guided Vehicles (AGVs), which are able to drive completely autonomously in very structured environments. Apart from industry and consumer electronics, within the automotive field there are some devices that give intelligence to the vehicle, derived in most cases from advances in mobile robotics. In fact, more and more often vehicles incorporate Advanced Driver Assistance Systems (ADAS), such as navigation control with automatic speed regulation, lane change and overtaking assistant, automatic parking or collision warning, among other features. However, despite all the advances there are some problems that remain unresolved and can be improved. Collisions and rollovers stand out among the most common accidents of vehicles with manual or autonomous driving. In fact, it is almost impossible to guarantee driving without accidents in unstructured environments where vehicles share the space with other moving agents, such as other vehicles and pedestrians. That is why searching for techniques to improve safety in intelligent vehicles, either autonomous or manual-assisted driving, is still a trending topic within the robotics community. This thesis focuses on the design of tools and techniques for planning and control of intelligent vehicles in order to improve safety and comfort. The dissertation is divided into two parts, the first one on autonomous driving and the second one on manual-assisted driving. The main link between them is the use of clothoids as mathematical formulation for both trajectory generation and collision detection. Among the problems solved the following stand out: obstacle avoidance, rollover avoidance and advanced driver assistance to avoid collisions with pedestrians.[ES] En la actualidad se comercializan infinidad de productos de electrónica de consumo que incorporan elementos y características procedentes de avances en el sector de la robótica móvil. Por ejemplo, el conocido robot aspirador Roomba de la empresa iRobot, el cual pertenece al campo de la robótica de servicio, uno de los más activos en el sector. También hay numerosos sistemas robóticos autónomos en almacenes y plantas industriales. Es el caso de los vehículos autoguiados (AGVs), capaces de conducir de forma totalmente autónoma en entornos muy estructurados. Además de en la industria y en electrónica de consumo, dentro del campo de la automoción también existen dispositivos que dotan de cierta inteligencia al vehículo, derivados la mayoría de las veces de avances en robótica móvil. De hecho, cada vez con mayor frecuencia los vehículos incorporan sistemas avanzados de asistencia al conductor (ADAS por sus siglas en inglés), tales como control de navegación con regulación automática de velocidad, asistente de cambio de carril y adelantamiento, aparcamiento automático o aviso de colisión, entre otras prestaciones. No obstante, pese a todos los avances siguen existiendo problemas sin resolver y que pueden mejorarse. La colisión y el vuelco destacan entre los accidentes más comunes en vehículos con conducción tanto manual como autónoma. De hecho, la dificultad de conducir en entornos desestructurados compartiendo el espacio con otros agentes móviles, tales como coches o personas, hace casi imposible garantizar la conducción sin accidentes. Es por ello que la búsqueda de técnicas para mejorar la seguridad en vehículos inteligentes, ya sean de conducción autónoma o manual asistida, es un tema que siempre está en auge en la comunidad robótica. La presente tesis se centra en el diseño de herramientas y técnicas de planificación y control de vehículos inteligentes, para la mejora de la seguridad y el confort. La disertación se ha dividido en dos partes, la primera sobre conducción autónoma y la segunda sobre conducción manual asistida. El principal nexo de unión es el uso de clotoides como elemento de generación de trayectorias y detección de colisiones. Entre los problemas que se resuelven destacan la evitación de obstáculos, la evitación de vuelcos y la asistencia avanzada al conductor para evitar colisiones con peatones.[CA] En l'actualitat es comercialitzen infinitat de productes d'electrònica de consum que incorporen elements i característiques procedents d'avanços en el sector de la robòtica mòbil. Per exemple, el conegut robot aspirador Roomba de l'empresa iRobot, el qual pertany al camp de la robòtica de servici, un dels més actius en el sector. També hi ha nombrosos sistemes robòtics autònoms en magatzems i plantes industrials. És el cas dels vehicles autoguiats (AGVs), els quals són capaços de conduir de forma totalment autònoma en entorns molt estructurats. A més de en la indústria i en l'electrònica de consum, dins el camp de l'automoció també existeixen dispositius que doten al vehicle de certa intel·ligència, la majoria de les vegades derivats d'avanços en robòtica mòbil. De fet, cada vegada amb més freqüència els vehicles incorporen sistemes avançats d'assistència al conductor (ADAS per les sigles en anglés), com ara control de navegació amb regulació automàtica de velocitat, assistent de canvi de carril i avançament, aparcament automàtic o avís de col·lisió, entre altres prestacions. No obstant això, malgrat tots els avanços segueixen existint problemes sense resoldre i que poden millorar-se. La col·lisió i la bolcada destaquen entre els accidents més comuns en vehicles amb conducció tant manual com autònoma. De fet, la dificultat de conduir en entorns desestructurats compartint l'espai amb altres agents mòbils, tals com cotxes o persones, fa quasi impossible garantitzar la conducció sense accidents. És per això que la recerca de tècniques per millorar la seguretat en vehicles intel·ligents, ja siguen de conducció autònoma o manual assistida, és un tema que sempre està en auge a la comunitat robòtica. La present tesi es centra en el disseny d'eines i tècniques de planificació i control de vehicles intel·ligents, per a la millora de la seguretat i el confort. La dissertació s'ha dividit en dues parts, la primera sobre conducció autònoma i la segona sobre conducció manual assistida. El principal nexe d'unió és l'ús de clotoides com a element de generació de trajectòries i detecció de col·lisions. Entre els problemes que es resolen destaquen l'evitació d'obstacles, l'evitació de bolcades i l'assistència avançada al conductor per evitar col·lisions amb vianants.Girbés Juan, V. (2016). Clothoid-based Planning and Control in Intelligent Vehicles (Autonomous and Manual-Assisted Driving) [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/65072TESI

Arquitecturas de hardware para um veículo eléctrico

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201

Measurable Safety of Automated Driving Functions in Commercial Motor Vehicles

With the further development of automated driving, the functional performance increases resulting in the need for new and comprehensive testing concepts. This doctoral work aims to enable the transition from quantitative mileage to qualitative test coverage by aggregating the results of both knowledge-based and data-driven test platforms. The validity of the test domain can be extended cost-effectively throughout the software development process to achieve meaningful test termination criteria

Evaluation of navigability in skid-steer mobile robots with passive trailers moving on sloping terrain

[EN] The use of trailers allows robots to increase their load capacity to perform multiple tasks, but their use carries multiple risks. In this research, three metrics are developed to assess the navigability of robots with coupled trailers when moving at low speeds on inclined surfaces: an index that predicts the initiation of rollover in the robot or trailers; another index that estimates the start of the total slip due to the slopes of the terrain, either in the robot or the trailers; and finally, an index that quantifies the robot's ability to address itself and follow a path. These three metrics were developed based on the reaction forces of the wheels with the ground and were validated through  simulation and experimental tests using a Skid Steer robot called Lázaro, demonstrating their effectiveness in estimating the risk condition for which they were designed.[ES] El uso de remolques permite a los robots aumentar su capacidad de carga para realizar múltiples tareas, pero su uso conlleva múltiples riesgos. En esta investigación, se desarrollan tres métricas para evaluar la navegabilidad de robots con remolques acoplados cuando se mueven a bajas velocidades sobre superficies inclinadas: un í­ndice que predice el inicio del vuelco en el robot o los remolques; otro í­ndice que estima el inicio del deslizamiento total debido a las inclinaciones del terreno, ya sea en el robot o los remolques; y finalmente, un í­ndice que cuantifica la capacidad del robot para direccionarse y seguir una trayectoria. Estas tres métricas fueron desarrolladas con base en las fuerzas de reacción de las ruedas con el suelo y fueron validados a través de simulación y pruebas experimentales utilizando un robot Skid Steer llamado Lázaro, demostrándose su efectividad al estimar la condición de riesgo para la cual fueron diseñados.Este trabajo ha sido realizado parcialmente gracias al apoyo del Decanato de Investigación de la Universidad Nacional Experimental del Táchira bajo los proyectos No. 01-025-2016 y 01-004-2019.García, JM.; Yánez, P.; Martínez, JE. (2022). Evaluación de la navegabilidad en robots móviles skid-steer con remolques pasivos moviéndose sobre terrenos inclinados. Revista Iberoamericana de Automática e Informática industrial. 20(1):13-24. https://doi.org/10.4995/riai.2022.17161132420

Measurable Safety of Automated Driving Functions in Commercial Motor Vehicles - Technological and Methodical Approaches

Fahrerassistenzsysteme sowie automatisiertes Fahren leisten einen wesentlichen Beitrag zur Verbesserung der Verkehrssicherheit von Kraftfahrzeugen, insbesondere von Nutzfahrzeugen. Mit der Weiterentwicklung des automatisierten Fahrens steigt hierbei die funktionale Leistungsfähigkeit, woraus Anforderungen an neue, gesamtheitliche Erprobungskonzepte entstehen. Um die Absicherung höherer Stufen von automatisierten Fahrfunktionen zu garantieren, sind neuartige Verifikations- und Validierungsmethoden erforderlich. Ziel dieser Arbeit ist es, durch die Aggregation von Testergebnissen aus wissensbasierten und datengetriebenen Testplattformen den Übergang von einer quantitativen Kilometerzahl zu einer qualitativen Testabdeckung zu ermöglichen. Die adaptive Testabdeckung zielt somit auf einen Kompromiss zwischen Effizienz- und Effektivitätskriterien für die Absicherung von automatisierten Fahrfunktionen in der Produktentstehung von Nutzfahrzeugen ab. Diese Arbeit umfasst die Konzeption und Implementierung eines modularen Frameworks zur kundenorientierten Absicherung automatisierter Fahrfunktionen mit vertretbarem Aufwand. Ausgehend vom Konfliktmanagement für die Anforderungen der Teststrategie werden hochautomatisierte Testansätze entwickelt. Dementsprechend wird jeder Testansatz mit seinen jeweiligen Testzielen integriert, um die Basis eines kontextgesteuerten Testkonzepts zu realisieren. Die wesentlichen Beiträge dieser Arbeit befassen sich mit vier Schwerpunkten: * Zunächst wird ein Co-Simulationsansatz präsentiert, mit dem sich die Sensoreingänge in einem Hardware-in-the-Loop-Prüfstand mithilfe synthetischer Fahrszenarien simulieren und/ oder stimulieren lassen. Der vorgestellte Aufbau bietet einen phänomenologischen Modellierungsansatz, um einen Kompromiss zwischen der Modellgranularität und dem Rechenaufwand der Echtzeitsimulation zu erreichen. Diese Methode wird für eine modulare Integration von Simulationskomponenten, wie Verkehrssimulation und Fahrdynamik, verwendet, um relevante Phänomene in kritischen Fahrszenarien zu modellieren. * Danach wird ein Messtechnik- und Datenanalysekonzept für die weltweite Absicherung von automatisierten Fahrfunktionen vorgestellt, welches eine Skalierbarkeit zur Aufzeichnung von Fahrzeugsensor- und/ oder Umfeldsensordaten von spezifischen Fahrereignissen einerseits und permanenten Daten zur statistischen Absicherung und Softwareentwicklung andererseits erlaubt. Messdaten aus länderspezifischen Feldversuchen werden aufgezeichnet und zentral in einer Cloud-Datenbank gespeichert. * Anschließend wird ein ontologiebasierter Ansatz zur Integration einer komplementären Wissensquelle aus Feldbeobachtungen in ein Wissensmanagementsystem beschrieben. Die Gruppierung von Aufzeichnungen wird mittels einer ereignisbasierten Zeitreihenanalyse mit hierarchischer Clusterbildung und normalisierter Kreuzkorrelation realisiert. Aus dem extrahierten Cluster und seinem Parameterraum lassen sich die Eintrittswahrscheinlichkeit jedes logischen Szenarios und die Wahrscheinlichkeitsverteilungen der zugehörigen Parameter ableiten. Durch die Korrelationsanalyse von synthetischen und naturalistischen Fahrszenarien wird die anforderungsbasierte Testabdeckung adaptiv und systematisch durch ausführbare Szenario-Spezifikationen erweitert. * Schließlich wird eine prospektive Risikobewertung als invertiertes Konfidenzniveau der messbaren Sicherheit mithilfe von Sensitivitäts- und Zuverlässigkeitsanalysen durchgeführt. Der Versagensbereich kann im Parameterraum identifiziert werden, um die Versagenswahrscheinlichkeit für jedes extrahierte logische Szenario durch verschiedene Stichprobenverfahren, wie beispielsweise die Monte-Carlo-Simulation und Adaptive-Importance-Sampling, vorherzusagen. Dabei führt die geschätzte Wahrscheinlichkeit einer Sicherheitsverletzung für jedes gruppierte logische Szenario zu einer messbaren Sicherheitsvorhersage. Das vorgestellte Framework erlaubt es, die Lücke zwischen wissensbasierten und datengetriebenen Testplattformen zu schließen, um die Wissensbasis für die Abdeckung der Operational Design Domains konsequent zu erweitern. Zusammenfassend zeigen die Ergebnisse den Nutzen und die Herausforderungen des entwickelten Frameworks für messbare Sicherheit durch ein Vertrauensmaß der Risikobewertung. Dies ermöglicht eine kosteneffiziente Erweiterung der Validität der Testdomäne im gesamten Softwareentwicklungsprozess, um die erforderlichen Testabbruchkriterien zu erreichen

Enhancing user experience and safety in the context of automated driving through uncertainty communication

Operators of highly automated driving systems may exhibit behaviour characteristic of overtrust issues due to an insufficient awareness of automation fallibility. Consequently, situation awareness in critical situations is reduced and safe driving performance following emergency takeovers is impeded. Previous research has indicated that conveying system uncertainties may alleviate these issues. However, existing approaches require drivers to attend the uncertainty information with focal attention, likely resulting in missed changes when engaged in non-driving-related tasks. This research project expands on existing work regarding uncertainty communication in the context of automated driving. Specifically, it aims to investigate the implications of conveying uncertainties under consideration of non-driving-related tasks and, based on the outcomes, develop and evaluate an uncertainty display that enhances both user experience and driving safety. In a first step, the impact of visually conveying uncertainties was investigated under consideration of workload, trust, monitoring behaviour, non-driving-related tasks, takeover performance, and situation awareness. For this, an anthropomorphic visual uncertainty display located in the instrument cluster was developed. While the hypothesised benefits for trust calibration and situation awareness were confirmed, the results indicate that visually conveying uncertainties leads to an increased perceived effort due to a higher frequency of monitoring glances. Building on these findings, peripheral awareness displays were explored as a means for conveying uncertainties without the need for focused attention to reduce monitoring glances. As a prerequisite for developing such a display, a systematic literature review was conducted to identify evaluation methods and criteria, which were then coerced into a comprehensive framework. Grounded in this framework, a peripheral awareness display for uncertainty communication was developed and subsequently compared with the initially proposed visual anthropomorphic uncertainty display in a driving simulator study. Eye tracking and subjective workload data indicate that the peripheral awareness display reduces the monitoring effort relative to the visual display, while driving performance and trust data highlight that the benefits of uncertainty communication are maintained. Further, this research project addresses the implications of increasing the functional detail of uncertainty information. Results of a driving simulator study indicate that particularly workload should be considered when increasing the functional detail of uncertainty information. Expanding upon this approach, an augmented reality display concept was developed and a set of visual variables was explored in a forced choice sorting task to assess their ordinal characteristics. Particularly changes in colour hue and animation-based variables received high preference ratings and were ordered consistently from low to high uncertainty. This research project has contributed a series of novel insights and ideas to the field of human factors in automated driving. It confirmed that conveying uncertainties improves trust calibration and situation awareness, but highlighted that using a visual display lessens the positive effects. Addressing this shortcoming, a peripheral awareness display was designed applying a dedicated evaluation framework. Compared with the previously employed visual display, it decreased monitoring glances and, consequentially, perceived effort. Further, an augmented reality-based uncertainty display concept was developed to minimise the workload increments associated with increases in the functional detail of uncertainty information.</div