46 research outputs found
Spectrally and Energy Efficient Wireless Communications: Signal and System Design, Mathematical Modelling and Optimisation
This thesis explores engineering studies and designs aiming to meeting the requirements of enhancing capacity and energy efficiency for next generation communication networks. Challenges of spectrum scarcity and energy constraints are addressed and new technologies are proposed, analytically investigated and examined.
The thesis commences by reviewing studies on spectrally and energy-efficient techniques, with a special focus on non-orthogonal multicarrier modulation, particularly spectrally efficient frequency division multiplexing (SEFDM). Rigorous theoretical and mathematical modelling studies of SEFDM are presented. Moreover, to address the potential application of SEFDM under the 5th generation new radio (5G NR) heterogeneous numerologies, simulation-based studies of SEFDM coexisting with orthogonal frequency division multiplexing (OFDM) are conducted. New signal formats and corresponding transceiver structure are designed, using a Hilbert transform filter pair for shaping pulses. Detailed modelling and numerical investigations show that the proposed signal doubles spectral efficiency without performance degradation, with studies of two signal formats; uncoded narrow-band internet of things (NB-IoT) signals and unframed turbo coded multi-carrier signals. The thesis also considers using constellation shaping techniques and SEFDM for capacity enhancement in 5G system. Probabilistic shaping for SEFDM is proposed and modelled to show both transmission energy reduction and bandwidth saving with advantageous flexibility for data rate adaptation. Expanding on constellation shaping to improve performance further, a comparative study of multidimensional modulation techniques is carried out. A four-dimensional signal, with better noise immunity is investigated, for which metaheuristic optimisation algorithms are studied, developed, and conducted to optimise bit-to-symbol mapping. Finally, a specially designed machine learning technique for signal and system design in physical layer communications is proposed, utilising the application of autoencoder-based end-to-end learning. Multidimensional signal modulation with multidimensional constellation shaping is proposed and optimised by using machine learning techniques, demonstrating significant improvement in spectral and energy efficiencies
Coexistence of orthogonal and nonorthogonal multicarrier signals in beyond 5G scenarios
Optimum operation of future mobile communication systems requires more flexible signalling mechanisms for radio access. For flexible heterogeneous signalling implementation, this work discusses coexistence scenarios of orthogonal and nonorthogonal multicarrier signals, specifically considering orthogonal frequency division multiplexing (OFDM) and spectrally efficient FDM (SEFDM) signals. Three main scenarios of the coexisting signalling are addressed under 5G new radio (5G NR) numerology with varying subcarrier spacing. Using numerical simulations, this work reports performance results of systems operating under the studied coexistence scenarios assuming uncoded and coded signals. Results reveal that systems employing SEFDM and OFDM result in some BER degradation when uncoded signals are used and also show that when applying low-density parity-check (LDPC) to the transmitted signals, the coexistence effects are mitigated and the block error rate (BLER) for both orthogonal and non-orthogonal signals suffers only slight degradation
Energy and Spectrally Efficient Signalling for Next Generation IoT
This work proposes an energy and spectrally efficient signalling technique for the next generation internet of things (IoT). The signalling method employs the bandwidth compressed fast-orthogonal frequency division multiplexing (FOFDM) scheme with the single dimensional pulse amplitude modulation (PAM) as well as the frequency orthogonal filtering technique using Hilbert transform (HT) pair. The proposed HT-FOFDM system is designed and modelled based on the narrowband IoT (NB-IoT) specifications. To investigate the designed signalling method of different spectral efficiencies, we conducted simulations for HT-FOFDM with comparisons to single-carrier frequency division multiple access (SC-FDMA). We show that the proposed PAM modulated HT-FOFDM signalling increases the data rate effectively while maintaining reliable transmission within the same bandwidth of 180kHz. Comparative results of the bit error rate (BER) performance in additive white Gaussian noise (AWGN) channel and constellation diagrams of received noisy signals are presented. Furthermore, we show that HT-FOFDM with PAM modulation schemes comprehensively outperforms SC-FDMA that achieves the same spectral efficiencies with significant power advantages
Non-Orthogonal Multi-band CAP for Highly Spectrally Efficient VLC Systems
In this work we propose and experimentally demonstrate a novel non-orthogonal
multi-band carrier-less amplitude and phase (NM-CAP) scheme for bandlimited
visible light communication systems in order to increase the spectral
efficiency. We show that a bandwidth saving up to 30% can be achieved thus
resulting in 44% improvement in the measured spectral efficiency with no
further bit error rate performance degradation compared to the traditional
m-CAP scheme. We also show that higher order systems can provide higher
bandwidth compression than low order systems. Furthermore, with no additional
functional blocks at the transmitter or the receiver the proposed scheme
introduces no extra computational complexity.Comment: 6 pages, 5 figure
Non-Orthogonal Multi-band CAP for Highly Spectrally Efficient VLC Systems
In this work we propose and experimentally demonstrate a novel non-orthogonal multi-band carrier-less amplitude and phase (NM-CAP) scheme for bandlimited visible light communication systems in order to increase the spectral efficiency. We show that a bandwidth saving up to 30% can be achieved thus resulting in 44% improvement in the measured spectral efficiency with no further bit error rate performance degradation compared to the traditional m-CAP scheme. We also show that higher order systems can provide higher bandwidth compression than low order systems. Furthermore, with no additional functional blocks at the transmitter or the receiver the proposed scheme introduces no extra computational complexity
Bandwidth Compressed Waveform and System Design for Wireless and Optical Communications: Theory and Practice
This thesis addresses theoretical and practical challenges of spectrally efficient frequency division multiplexing (SEFDM) systems in both wireless and optical domains. SEFDM improves spectral efficiency relative to the well-known orthogonal frequency division multiplexing (OFDM) by non-orthogonally multiplexing overlapped sub-carriers. However, the deliberate violation of orthogonality results in inter carrier interference (ICI) and associated detection complexity, thus posing many challenges to practical implementations. This thesis will present solutions for these issues. The thesis commences with the fundamentals by presenting the existing challenges of SEFDM, which are subsequently solved by proposed transceivers. An iterative detection (ID) detector iteratively removes self-created ICI. Following that, a hybrid ID together with fixed sphere decoding (FSD) shows an optimised performance/complexity trade-off. A complexity reduced Block-SEFDM can subdivide the signal detection into several blocks. Finally, a coded Turbo-SEFDM is proved to be an efficient technique that is compatible with the existing mobile standards. The thesis also reports the design and development of wireless and optical practical systems. In the optical domain, given the same spectral efficiency, a low-order modulation scheme is proved to have a better bit error rate (BER) performance when replacing a higher order one. In the wireless domain, an experimental testbed utilizing the LTE-Advanced carrier aggregation (CA) with SEFDM is operated in a realistic radio frequency (RF) environment. Experimental results show that 40% higher data rate can be achieved without extra spectrum occupation. Additionally, a new waveform, termed Nyquist-SEFDM, which compresses bandwidth and suppresses out-of-band power leakage is investigated. A 4th generation (4G) and 5th generation (5G) coexistence experiment is followed to verify its feasibility. Furthermore, a 60 GHz SEFDM testbed is designed and built in a point-to-point indoor fiber wireless experiment showing 67% data rate improvement compared to OFDM. Finally, to meet the requirements of future networks, two simplified SEFDM transceivers are designed together with application scenarios and experimental verifications
Design and analysis of adaptively modulated optical orthogonal frequency division multiple access multiband passive optical networks
The aim of this thesis is to explore innovative technical solutions of utilising Optical Orthogonal Frequency Division Multiplexing (OOFDM) in intensity modulation and direct detection (IMDD) based future access networks to provide multi-service capability with a minimum 1 Gb/s per user. This thesis extensively investigates and analyses the feasibility and performance of adaptively modulated optical orthogonal frequency division multiplexing multiple access passive optical networks (AMOOFDMA PONs) upstream transmission systems by numerically simulating AMOOFDMA PONs using experimentally determined parameters. OOFDM transceivers incorporating reflective semiconductor optical amplifiers (RSOAs) and distributed feedback (DFB) lasers are utilised in the transceivers and intensity modulation and direct detection (IMDD) transmission systems are also employed to achieve a low complexity, high speed and large bandwidth PON as a solution for next generation access networks. Numerical simulations has also being undertaken to improve overall AMOOFDMA PON performance and power budget by incorporating optical band-pass filters (OBPFs) at the output of optical network units (ONUs). A major challenge of making PONs spectrally efficient has been addressed in this thesis by investigating the AMOOFDMA PON with ONUs on a single upstream wavelength. The performance of the single upstream wavelength AMOOFDMA PON is compared to the multiple wavelength AMOOFDMA PON. Another major challenge in AMOOFDMA PONs namely improving system capacity has also been addressed by implementing multiband transmission in an AMOOFDMA PON. Results show that for a multiple upstream OOFDMA IMDD PON system over 25 km single mode fibre (SMF) can achieve an aggregated data rate of 11.25 Gb/s and the minimum wavelength spacing between ONUs are independent of the number of ONUs. Results also show that a single upstream wavelength AMOOFDMA IMDD PON with multiband incorporated at the ONUs can achieve a aggregated line rate of 21.25 Gb/s over 25 km SMF
Digital Linearization of High Capacity and Spectrally Efficient Direct Detection Optical Transceivers
Metropolitan area networks are experiencing unprecedented traffic growth. The provision of information and entertainment supported by cloud services, broadband video and mobile technologies such as long-term evolution (LTE) and 5G are creating a rapidly increasing demand for bandwidth. Although wavelength division multiplexing (WDM) architectures have been introduced into metro transport networks to provide significant savings over single-channel systems, to cope with the ever-increasing traffic growth, it is urgently required to deploy higher data rates (100 Gb/s and beyond) for each WDM channel. In comparison to dual-polarization digital coherent transceivers, single-polarization and single photodiode-based direct-detection (DD) transceivers may be favourable for metropolitan, inter-data centre and access applications due to their use of a simple and low-cost optical hardware structure. Single sideband (SSB) quadrature amplitude modulation (QAM) subcarrier modulation (SCM) is a promising signal format to achieve high information spectral density (ISD). However, due to the nonlinear effect termed signal-signal beat interference (SSBI) caused by the square-law detection, the performance of such SSB SCM DD systems is severely degraded. Therefore, it is essential to develop effective and low-complexity linearization techniques to eliminate the SSBI penalty and improve the performance of such transceivers. Extensive studies on SSB SCM DD transceivers employing a number of novel digital linearization techniques to support high capacity (≥ 100 Gb/s per channel) and spectrally-efficient (net ISD > 2 b/s/Hz) WDM transmission covering metropolitan reach scenarios (up to 240 km) are described in detail in this thesis. Digital modulation formats that can be used in DD links and the corresponding transceiver configurations are firstly reviewed, from which the SSB SCM signalling format is identified as the most promising format to achieve high data rates and ISDs. Following this, technical details of the digital linearization approaches (iterative SSBI cancellation, single-stage linearization filter and simplified non-iterative SSBI cancellation, two-stage linearization filter, Kramers-Kronig scheme) considered in the thesis are presented. Their compensation performance in a dispersion pre-compensated (Tx-EDC) 112 Gb/s per channel 35 GHz-spaced WDM SSB 16-QAM Nyquist-SCM DD system transmitting over up to 240 km standard single-mode fibre (SSMF) is assessed. Net ISDs of up to 3.18 b/s/Hz are achieved. Moreover, we also show that, with the use of effective digital linearization techniques, further simplification of the DD transceivers can be realized by moving electronic dispersion compensation from the transmitter to the receiver without sacrificing performance. The optical ISD limit of SSB SCM DD system finally explored through experiments with higher-order modulation formats combined with effective digital linearization techniques. 168 Gb/s per channel WDM 64-QAM signals were successfully transmitted over 80 km, achieving a record net optical ISD of 4.54 b/s/Hz. Finally, areas for further research are identified
Orthogonal Generalized Frequency Division Multiplexing (OGFDM)
This thesis focuses on introducing a novel technique of the transmission waveform termed as orthogonal generalized frequency division multiplexing (OGFDM) for increasing the wireless channel capacity without the need for extra bandwidth (BW) size or power consumption. The new wireless waveform (OGFDM) tends to obtain a better BW efficiency which in turn can increase highly the wireless channel capacity in comparison with the generalized frequency division multiplexing (GFDM) and cyclic-prefix orthogonal frequency division multiplexing (CP-OFDM). The main feature of the OGFDM is developing the physical layer of future mobile networks by achieving the orthogonality between non-orthogonal filters, removing the interference between adjacent frequency subcarriers, and gaining a flexible bit loading scheme. Since the key downsides of the 4G waveform (CP-OFDM), several alternative transmission waveforms have been investigated for improving transmission techniques of the upcoming communication networks (5G and beyond). This, as a result, comes up with introducing the GFDM as the best candidate waveform for the 5G air interface. Nevertheless, due to ignoring the orthogonality with the GFDM, the BW efficiency is severely affected which in turn causes in extremely reducing the gained channel capacity (research gap). For this reason, the proposed OGFDM waveform aims to improve wireless channel capacity by investigating different levels of processing and carrier schemes. As such, three key levels called as filtration level, oversampling level, and modulation level are adopted for a variant range of OGFDM carriers like a single carrier, couple carrier, quadruple carrier, and multi-carrier system. Regarding the single carrier OGFDM system where the filtration level is developed, the orthogonality is attained between the non-orthogonal filters of the GFDM frequency subcarriers. The core idea behind this novel technique is increasing the efficiency of the applied BW which in turn can double the capacity of the channel at the acceptable level of the bit error rate (BER). Concerning the couple carrier OGFDM system where the oversampling level is developed, the double oversampling mode is applied side by side with the normal one. As a result, the OGFDM waveform can efficiently avoid the interference between adjacent frequency subcarriers improving the quality of service under bad transmission states. As regards the quadruple carrier OGFDM system where the modulation level is improved, a flexible modulation scheme is utilized rather than the fixed modulation formats. Consequently, multilevel modulation shapes are optimally assigned to gain an enhanced channel capacity in accordance with the realistic transmission state. To achieve a higher BW efficiency, the preliminary multi-carrier system that combines the three levels of processing in one uniformed physical platform is introduced. To demonstrate the main advantages of OGFDM waveform, the multicarrier system is further extended and compared with the GFDM (5G technology) and CP-OFDM (LTE Ericsson technology). Hence, the multi-carrier OGFDM can double, boost, and yet maximize the bit-rate of the transmission relative to the GFDM and CP-OFDM at the acceptable level of the BER. The MATLAB simulation and Visio tools are utilized to validate the results and represent them graphically
Orthogonal frequency division multiplexing for optical access networks
Orthogonal Frequency Division Multiplexing (OFDM) is a modulation scheme with numerous advantages that has for years been employed as the leading physical interface in many wired and wireless communication systems. Recently, with advancements made in digital signal processing, there has been a surge of interest in applying OFDM techniques for optical communications. This thesis presents extensive research on optical OFDM and how it is being applied in access networks. With the aid of theoretical analysis, simulations and experiments, it is shown that the system performance of direct-detection optical OFDM (DD-OOFDM) in the presence of MZM non-linear distortion can be improved by proper biasing and selection of appropriate drive to the MZM. Investigations are conducted to illustrate how a variation in the number of subcarriers and the modulation format influences the sensitivity of the DD-OOFDM system to the MZM non-linear distortion. The possibility of improving the spectral efficiency by reduction of the width of the guard band is also investigated. This thesis also looks into the radio-over-fibre (RoF) transmission of Multiband OFDM UWB as a transparent and low-cost solution for distributing multi-Gbit/s data to end-users in FTTH networks. Due to relaxed regulatory requirements and the wide bandwidth available, UWB operation in the 60-GHz band is also considered for this FTTH application scenario. Four techniques for enabling MB-OFDM UWB RoF operation in the 60-GHz band are experimentally demonstrated. The impacts of various parameters on the performance of the techniques as well as the limitations imposed by fibre distribution are illustrated. Finally, a digital pre-distorter is proposed for compensating for the MZM non-linearity. Experimental demonstration of this digital pre-distortion in an UWB over fibre transmission system shows an increased tolerance to the amplitude of the driving OFDM signal as well as an increase in the optimum modulation index of the OFDM signal