1,208 research outputs found

    Applying SDN/OpenFlow in Virtualized LTE to support Distributed Mobility Management (DMM)

    Get PDF
    Distributed Mobility Management (DMM) is a mobility management solution, where the mobility anchors are distributed instead of being centralized. The use of DMM can be applied in cloud-based (virtualized) Long Term Evolution (LTE) mobile network environments to (1) provide session continuity to users across personal, local, and wide area networks without interruption and (2) support traffic redirection when a virtualized LTE entity like a virtualized Packet Data Network Gateway (P-GW) running on an virtualization platform is migrated to another virtualization platform and the on-going sessions supported by this P-GW need to be maintained. In this paper we argue that the enabling technology that can efficiently be used for supporting DMM in virtualized LTE systems is the Software Defined Networking (SDN)/OpenFlow technology

    VPN Solution Benchmarking for Endpoints Under Fast Network Mobility

    Get PDF
    This dissertation was proposed by Veniam, a start-up working on vehicular networks. Offering connectivity to moving things over different technologies (DSRC, Wi-Fi, or 4G LTE) while maintaining a good quality of experience for users is a challenging endeavour. In some cases, the use of a VPN can solve many of the issues. However, many popular VPN solutions were developed with a different use case in mind - the out of office worker. These solutions cannot handle mobility well, breaking connections when access points switch, and require considerable processing power. Applying these solutions to the fast moving, low resource devices deployed in Veniam connected fleets results in a severely degraded service. Therefore, other VPNs will be researched and compared, in order to benchmark and pick a suitable VPN solution. The VPN's overhead, namely throughput degradation, latency increase, and CPU usage will be measured, and its capacity to adapt to fast switching over heterogenous networks evaluated. The benchmark results will allow the minimisation of service degradation caused by the use of VPN tunnels in this constrained mobile environment

    Internet of Drones Simulator: Design, Implementation, and Performance Evaluation

    Full text link
    The Internet of Drones (IoD) is a networking architecture that stems from the interplay between Unmanned Aerial Vehicles (UAVs) and wireless communication technologies. Networked drones can unleash disruptive scenarios in many application domains. At the same time, to really capitalize their potential, accurate modeling techniques are required to catch the fine details that characterize the features and limitations of UAVs, wireless communications, and networking protocols. To this end, the present contribution proposes the Internet of Drones Simulator (IoD-Sim), a comprehensive and versatile open source tool that addresses the many facets of the IoD. IoD-Sim is a Network Simulator 3 (ns-3)-based simulator organized in a 3-layer stack, composed by (i) the Underlying Platform, which provides the telecommunication primitives for different standardized protocol stacks, (ii) the Core, that implements all the fundamental features of an IoD scenario, and (iii) the Simulation Development Platform, mainly composed by a set of tools that speeds up the graphical design for every possible use-case. In order to prove the huge potential of this proposal, three different scenarios are presented and analyzed from both a software perspective and a telecommunication standpoint. The peculiarities of this open-source tool are of interest for researchers in academia, as they will be able to extend to model upcoming specifications, including, but not limited to, mobile networks and satellite communications. Still, it will certainly be of relevance in industry to accelerate the design phase, thus improving the time-to-market of IoD-based services.Comment: in IEEE Internet of Things Journal, 202

    The Design and Implementation of an Over-the-top Cloud-based Vertical Handover Decision Service for Heterogeneous Wireless Networks

    Get PDF
    The widespread availability of heterogeneous wireless networks (hetnets) presents a resource allocation challenge to network operators and administrators. Overlapping network coverage should be utilized to its fullest extent, providing users with a fair share of bandwidth while maximizing the efficient use of the operator\u27s resources. Currently, network selection occurs locally at the mobile device and does not take into account factors such as the state of other networks that might be available in the device\u27s location. The local decision made by the device can often result in underutilization of network resources and a degraded user experience. This type of selfish network selection might not result in optimal bandwidth allocation when compared to approaches that make use of a centralized resource controller \cite{gpf}. The decision making process behind the selection of these networks continues to be an open area of research, and a variety of algorithms have been proposed to solve this problem. An over-the-top handover decision service treats each wireless access network in a hetnet as a black box, assuming detailed network topology and state information is unavailable to the handover decision algorithm. The algorithm then uses network data gathered empirically from users to provide them with a network selection service that considers the current conditions of available networks in a given location. This is a departure from past designs of vertical handover decision algorithms, which tend to approach the problem from the perspective of individual network operators. The wide range of radio access technologies operated by different network operators that are available to a device within a hetnet, coupled with the mobile data offload effort, is the primary motivator behind our novel choice in direction. This thesis documents the design and implementation of such an over-the-top vertical handover decision service

    OpenEPC Integration within 5GTN as an NFV proof of concept

    Get PDF
    Abstract. Gone are the days, when a hardware is changed on every malfunctioning and the whole operation either stays down or load on the replacing hardware becomes too much which ultimately compromises the QoS. The IT industry is mature enough to tackle problems regarding scalability, space utilization, energy consumption, cost, agility and low availability. The expected throughput and network latency with 5G in the cellular Telecommunication Networks seems to be unachievable with the existing architecture and resources. Network Function Virtualization promises to merge IT and Telecommunications in such an efficient way that the expected results could be achieved no longer but sooner. The thesis work examines the compatibility and flexibility of a 3GPP virtual core network in a virtualization platform. The testbed is established on an LTE (Long Term Evolution) based network being already deployed and OpenEPC is added as virtual core network on it. The integration of OpenEPC in 5GTN (5TH Generation Test Network) is discussed in details in the thesis which will give an account of the possibility of implementing such a simulated vEPC (Virtual Evolved Packet Core) in a real network platform. The deployed setup is tested to check its feasibility and flexibility for a platform which could be used for NFV deployment in future. The monitoring of OpenEPC’s individual components while utilizing the major resources within them, forms the primary performance test. The CPU Load and Memory Utilization is tested on different CPU stress levels having a constant data traffic from actual UEs. At the completion of the thesis work, a consensus is built up based on the test results that the test setup can hold number of subscribers to a certain amount without any performance degradation. Moreover, the virtual core network throughput and network latency is also compared to the commercial LTE networks and theoretical maximum values on similar resources to check performance consistency OpenEPC must offer

    Wireless backhaul in future cellular communication

    Get PDF
    Abstract. In 5G technology, huge number of connected devices are needed to be considered where the expected throughput is also very ambitious. Capacity is needed and thus used frequencies are expected to get higher (above 6 GHz even up to 80 GHz), the Cell size getting smaller and number of cells arising significantly. Therefore, it is expected that wireless backhaul will be one option for Network operators to deliver capacity and coverage for high subscriber density areas with reduced cost. Wireless backhaul optimization, performance and scalability will be on the critical path on such cellular system. This master’s thesis work includes connecting a base station by using the wireless backhaul by introducing a VPN in the proposed network. We find the bottleneck and its solution. The network is using 3.5 GHz wireless link instead of LAN wire for backhaul link between the EnodeB and the core network (OpenEPC). LTE TDD band 42 acting as a Wireless Backhaul (Link between EnodeB and Band 42 CPE Router). The status and attachment procedure are observed from different nodes of the openEPC and from the VPN machine. Step by step we have established a tunnel between the CPE device and the VPN server using PPTP and L2TP with IPSec tunneling protocol. The progression towards the final implementation brings in step by step all difficulties and bottlenecks are documented in the study

    Software-Driven and Virtualized Architectures for Scalable 5G Networks

    Full text link
    In this dissertation, we argue that it is essential to rearchitect 4G cellular core networks–sitting between the Internet and the radio access network–to meet the scalability, performance, and flexibility requirements of 5G networks. Today, there is a growing consensus among operators and research community that software-defined networking (SDN), network function virtualization (NFV), and mobile edge computing (MEC) paradigms will be the key ingredients of the next-generation cellular networks. Motivated by these trends, we design and optimize three core network architectures, SoftMoW, SoftBox, and SkyCore, for different network scales, objectives, and conditions. SoftMoW provides global control over nationwide core networks with the ultimate goal of enabling new routing and mobility optimizations. SoftBox attempts to enhance policy enforcement in statewide core networks to enable low-latency, signaling-efficient, and customized services for mobile devices. Sky- Core is aimed at realizing a compact core network for citywide UAV-based radio networks that are going to serve first responders in the future. Network slicing techniques make it possible to deploy these solutions on the same infrastructure in parallel. To better support mobility and provide verifiable security, these architectures can use an addressing scheme that separates network locations and identities with self-certifying, flat and non-aggregatable address components. To benefit the proposed architectures, we designed a high-speed and memory-efficient router, called Caesar, for this type of addressing schemePHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/146130/1/moradi_1.pd
    • …
    corecore