Hardware Implementation of Efficient Elliptic Curve Scalar Multiplication using Vedic Multiplier

This paper presents an area efficient and high-speed FPGA implementation of scalar multiplication using a Vedic multiplier. Scalar multiplication is the most important operation in Elliptic Curve Cryptography(ECC), which used for public key generation and the performance of ECC greatly depends on it. The scalar multiplication is multiplying integer k with scalar P to compute  Q=kP, where k is private key and P is a base point on the Elliptic curve. The Scalar multiplication underlying finite field arithmetic operation i.e. addition multiplication, squaring and inversion to compute Q. From these finite field operations, multiplication is the most time-consuming operation, occupy more device space and it dominates the speed of Scalar multiplication. This paper presents an efficient implementation of finite field multiplication using a Vedic multiplier.  The scalar multiplier is designed over Galois Binary field GF(2233) for field size=233-bit which is secured curve according to NIST.  The performances of the proposed design are evaluated by comparing it with  Karatsuba based scalar multiplier for area and delay. The results show that the proposed scalar multiplication using Vedic multiplier has consumed 22% less area on FPGA and also has 12% less delay, than Karatsuba, based scalar multiplier. The scalar multiplier is coded in Verilog HDL, synthesize and simulated in Xilinx 13.2 ISE on Virtex6 FPGA

Multi-operand Decimal Adder Trees for FPGAs

The research and development of hardware designs for decimal arithmetic is currently going under an intense activity. For most part, the methods proposed to implement fixed and floating point operations are intended for ASIC designs. Thus, a direct mapping or adaptation of these techniques into a FPGA could be far from an optimal solution. Only a few studies have considered new methods more suitable for FPGA implementations. A basic operation that has not received enough attention in this context is multi-operand BCD addition. For example, it is of interest for low latency implementations of decimal fixed and floating point multipliers and decimal fused multiply-add units. We have explored the most representative proposals for multi-operand BCD addition and found that the resultant implementations in FPGAs are still very inefficient in terms of both area and latency when compared to their binary counterparts. In this paper we present a new method for fast and efficient implementation of multi-operand BCD addition in current FPGA devices. In particular, our proposal maps quite well into the slice structure of the Xilinx Virtex-5/Virtex-6 families and it is highly pipelineable. The synthesis results for a Virtex-6 device indicate that our implementations halve the area and latency of previous proposals, presenting area and delay figures close to those of optimal binary adder trees.La recherche sur l'implantation en matériel de l'arithmétique décimale est actuellement très active, la plupart des travaux portant sur des opérateurs pour les processeurs, en virgule fixe ou flottante. Mais les techniques développées pour un circuit intégré n'aboutissent pas forcément à une implémentation optimale dans un FPGA. Il n'y a que peu d'études ciblant explicitement les FPGA. Cet article s'intéresse dans ce contexte, à l'addition BCD multi-opérande, au cœur de multiplieurs et de multiplieurs-accumulateurs à faible latence. Nous étudions les architectures proposées pour cette opération décimale, et nous observons que, sur FPGA, leur performance (surface et latence) est très inférieure à celle des opérations binaire à précision comparable. Nous présentons donc dans cet article une nouvelle technique d'addition BCD multi-opérandes qui s'avère plus efficace que les propositions précédentes sur les FPGA actuels. Elle s'adapte particulièrement bien à la structure fine des FPGA Xilinx Virtex-5/Virtex-6, et se prête bien au pipeline. Les résultats de synthèse montrent que notre implémentation divise par deux la surface et la latence par rapport aux propositions précédentes, les ramenant à des valeurs comparables à celles des meilleurs additionneurs multi-opérandes binaires

Series Expansion based Efficient Architectures for Double Precision Floating Point Division

postprin

Dedicated Hardware for Complex Mathematical Operations

New hardware FPGA implementations for the efficient computations of division, natural logarithm and exponential function are proposed. The proposed implementations use generic floating-point adder and multiplier with small additional resources that are shared to compute more frequently used multiply and accumulate operations. Hardware sharing improved the resource utilization. The time of the computation has been reduced to only 6 clock cycles when the natural logarithm and exponential function are calculated. The division is calculated in 5 clock cycles. They are designed as technology independent high throughput computing cores with minimized memory requirements which can be used in higher numbers to significantly increased calculation speed in spectral processing. A new universal arithmetic floating-point unit is also proposed

Efficient Floating-Point Representation for Balanced Codes for FPGA Devices

Trabajo premiado con Best paper AwardWe propose a floating–point representation to deal efficiently with arithmetic operations in codes with a balanced number of additions and multiplications for FPGA devices. The variable shift operation is very slow in these devices. We propose a format that reduces the variable shifter penalty. It is based on a radix–64 representation such that the number of the possible shifts is considerably reduced. Thus, the execution time of the floating–point addition is highly optimized when it is performed in an FPGA device, which compensates for the multiplication penalty when a high radix is used, as experimental results have shown. Consequently, the main problem of previous specific highradix FPGA designs (no speedup for codes with a balanced number of multiplications and additions) is overcome with our proposal. The inherent architecture supporting the new format works with greater bit precision than the corresponding single precision (SP) IEEE–754 standard.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. IEEE, IEEE Computer Societ

Performance Analysis of Modified Lifting Based DWT Architecture and FPGA Implementation for Speed and Power

Demand for high speed and low power architecture for DWT computation have led to design of novel algorithms and architecture In this paper we design model and implement a hardware efficient high speed and power efficient DWT architecture based on modified lifting scheme algorithm The design is interfaced with SIPO and PISO to reduce the number of I O lines on the FPGA The design is implemented on Spartan III device and is compared with lifting scheme logic The proposed design operates at frequency of 280 MHz and consumes power less than 42 mW The presynthesis and post-synthesis results are verified and suitable test vectors are used in verifying the functionality of the design The design is suitable for real time data processin

Strategies for FPGA Implementation of Non-Restoring Square Root Algorithm

This paper presents three strategies to implement non restoring square root algorithm based on FPGA. A new basic building block is called controlled subtract-multiplex (CSM) is introduced in first strategy which use gate level abstraction. The main principle of the method is similar with conventional non-restoring algorithm, but it only uses subtract operation and append 01, while add operation and append 11 is not used. Second strategy presents the first strategy in register transfer level (RTL) abstraction. In third strategy, a modification for the implementation of conventional non-restoring algorithm is presented which also use RTL abstraction. The all above strategies is implemented in VHDL programming and adopt fully pipelined architecture. The strategies have conducted to implement successfully in FPGA hardware, and each of the strategies is offer an efficient in hardware resource. In generally, the third strategy is superior.DOI:http://dx.doi.org/10.11591/ijece.v4i4.600

Algorithms and architectures for decimal transcendental function computation

Nowadays, there are many commercial demands for decimal floating-point (DFP) arithmetic operations such as financial analysis, tax calculation, currency conversion, Internet based applications, and e-commerce. This trend gives rise to further development on DFP arithmetic units which can perform accurate computations with exact decimal operands. Due to the significance of DFP arithmetic, the IEEE 754-2008 standard for floating-point arithmetic includes it in its specifications. The basic decimal arithmetic unit, such as decimal adder, subtracter, multiplier, divider or square-root unit, as a main part of a decimal microprocessor, is attracting more and more researchers' attentions. Recently, the decimal-encoded formats and DFP arithmetic units have been implemented in IBM's system z900, POWER6, and z10 microprocessors. Increasing chip densities and transistor count provide more room for designers to add more essential functions on application domains into upcoming microprocessors. Decimal transcendental functions, such as DFP logarithm, antilogarithm, exponential, reciprocal and trigonometric, etc, as useful arithmetic operations in many areas of science and engineering, has been specified as the recommended arithmetic in the IEEE 754-2008 standard. Thus, virtually all the computing systems that are compliant with the IEEE 754-2008 standard could include a DFP mathematical library providing transcendental function computation. Based on the development of basic decimal arithmetic units, more complex DFP transcendental arithmetic will be the next building blocks in microprocessors. In this dissertation, we researched and developed several new decimal algorithms and architectures for the DFP transcendental function computation. These designs are composed of several different methods: 1) the decimal transcendental function computation based on the table-based first-order polynomial approximation method; 2) DFP logarithmic and antilogarithmic converters based on the decimal digit-recurrence algorithm with selection by rounding; 3) a decimal reciprocal unit using the efficient table look-up based on Newton-Raphson iterations; and 4) a first radix-100 division unit based on the non-restoring algorithm with pre-scaling method. Most decimal algorithms and architectures for the DFP transcendental function computation developed in this dissertation have been the first attempt to analyze and implement the DFP transcendental arithmetic in order to achieve faithful results of DFP operands, specified in IEEE 754-2008. To help researchers evaluate the hardware performance of DFP transcendental arithmetic units, the proposed architectures based on the different methods are modeled, verified and synthesized using FPGAs or with CMOS standard cells libraries in ASIC. Some of implementation results are compared with those of the binary radix-16 logarithmic and exponential converters; recent developed high performance decimal CORDIC based architecture; and Intel's DFP transcendental function computation software library. The comparison results show that the proposed architectures have significant speed-up in contrast to the above designs in terms of the latency. The algorithms and architectures developed in this dissertation provide a useful starting point for future hardware-oriented DFP transcendental function computation researches