A Priori Knowledge-Based Post-Doppler STAP for Traffic Monitoring with Airborne Radar

Die Verkehrsüberwachung gewinnt aufgrund des weltweiten Anstiegs der Verkehrsteilnehmer immer mehr an Bedeutung. Sicherer und effizierter Straßenverkehr erfordert detaillierte Verkehrsinformationen. Häufig sind diese lediglich stationär, räumlich stark begrenzt und meist nur auf Hauptverkehrsstraßen verfügbar. In dieser Hinsicht ist ein Ausfall des Telekommunikationsnetzes, beispielsweise im Falle einer Katastrophe, und der damit einhergehende Informationsverlust als kritisch einzustufen. Flugzeuggetragene Radarsysteme mit synthetischer Apertur (eng. Synthetic Aperture Radar - SAR) können für dieses Szenario eine Lösung darstellen, da sie großflächig hochauflösende Bilder generieren können, unabhängig von Tageslicht und Witterungsbedingungen. Sie ermöglichen aufgrund dieser Charakteristik die Detektion von Bewegtzielen am Boden (eng. ground moving target indication – GMTI). Moderne GMTI-Algorithmen und -Systeme, die prinzipiell für die Verkehrsüberwachung verwendbar sind, wurden in der Literatur bereits diskutiert. Allerdings ist die Robustheit dieser Systeme oft mit hohen Kosten, hoher Hardwarekomplexität und hohem Rechenaufwand verbunden. Diese Dissertation stellt einen neuartigen GMTI-Prozessor vor, der auf dem Radar-Mehrkanalverfahren post-Doppler space-time adaptive processing (PD STAP) basiert. Durch die Überlagerung einer Straßenkarte mit einem digitalen Höhenmodell ist es mithilfe des PD STAP möglich, Falschdetektionen zu erkennen und auszuschließen sowie die detektierten Fahrzeuge ihren korrekten Straßenpositionen zu zuordnen. Die präzisen Schätzungen von Position, Geschwindigkeit und Bewegungsrichtung der Fahrzeuge können mit vergleichsweise geringerer Hardware-Komplexität zu niedrigeren Kosten durchgeführt werden. Ferner wird im Rahmen dieser Arbeit ein effizienter Datenkalibrierungsalgorithmus erläutert, der das Ungleichgewicht zwischen den Empfangskanälen sowie die Variation des Dopplerschwerpunkts über Entfernung und Azimut korrigiert und so das Messergebnis verbessert. Darüber hinaus werden neue und automatisierte Strategien zur Erhebung von Trainingsdaten vorgestellt, die für die Schätzung der Clutter-Kovarianzmatrix wegen ihres direkten Einflusses auf die Clutter-Unterdrückung und Zieldetektion essentiell für PD STAP sind. Der neuartige PD STAP Prozessor verfügt über drei verschiedene Betriebsarten, die für militärische und zivile Anwendungen geeignet sind, darunter ein schneller Verarbeitungsalgorithmus der das Potential für eine zukünftige Echtzeit-Verkehrsüberwachung hat. Alle Betriebsarten wurden erfolgreich mit Radar-Mehrkanaldaten des flugzeuggetragenen F-SAR-Radarsensors des DLR getestet

Adaptive Illumination Patterns for Radar Applications

The fundamental goal of Fully Adaptive Radar (FAR) involves full exploitation of the joint, synergistic adaptivity of the radar\u27s transmitter and receiver. Little work has been done to exploit the joint space time Degrees-of-Freedom (DOF) available via an Active Electronically Steered Array (AESA) during the radar\u27s transmit illumination cycle. This research introduces Adaptive Illumination Patterns (AIP) as a means for exploiting this previously untapped transmit DOF. This research investigates ways to mitigate clutter interference effects by adapting the illumination pattern on transmit. Two types of illumination pattern adaptivity were explored, termed Space Time Illumination Patterns (STIP) and Scene Adaptive Illumination Patterns (SAIP). Using clairvoyant knowledge, STIP demonstrates the ability to remove sidelobe clutter at user specified Doppler frequencies, resulting in optimum receiver performance using a non-adaptive receive processor. Using available database knowledge, SAIP demonstrated the ability to reduce training data heterogeneity in dense target environments, thereby greatly improving the minimum discernable velocity achieved through STAP processing

FM airborne passive radar

The airborne application of Passive Bistatic Radar (PBR) is the latest evolution of the now established international interest in passive radar techniques. An airborne passive system is cheaper to construct, easier to cool, lighter and requires less power than a traditional active radar system. These properties make it ideal for installation on an Unmanned Aerial Vehicle (UAV), especially for the next generation of Low Observable (LO) UAVs, complementing the platforms LO design with an inherently Low Probability of Intercept (LPI) air-to-air and air-to-ground sensing capability. A comprehensive literature review identified a lack of practical and theoretical research in airborne passive bistatic radar and a quantitative model was designed in order to un- derstand the theoretical performance achievable using a hypothetical system and FM as the illuminator of opportunity. The results demonstrated a useable surveillance volume, assuming conservative estimates for the receiver parameters and allowed the scoping and specification of an airborne demonstrator system. The demonstrator system was subsequently designed and constructed and flown on airborne experiments to collect data for both air-to-air and air-to-ground operation analysis. Subsequent processing demonstrated the successful detection of air targets which correlated with the actual aircraft positions as recorded by a Mode-S/ADS-B receiver. This is the first time this has been conclusively demonstrated in the literature. Doppler Beam Sharpening was used to create a coarse resolution image allowing the normalised bistatic clutter RCS of the stationary surface clutter to be analysed. This is the first time this technique has been applied to an airborne passive system and has yielded the first quantitive values of normalised bistatic clutter RCS at VHF. This successful demonstration of airborne passive radar techniques provides the proof of concept and identifies the key research areas that need to be addressed in order to fully develop this technology

Efficient SAR MTI simulator of marine scenes

Tècniques de detecció de moviment amb radars d'apertura sintètica multicanals sobre escenaris marítims.[ANGLÈS] Multichannel spaceborne and airborne synthetic aperture radars (SAR) offer the opportunity to monitor maritime traffic through specially designed instruments and applying a suitable signal processing in order to reject sea surface clutter. These processing techniques are known as Moving Target Indication techniques (MTI) and the choice of the most adequate method depends on the radar system and operating environment. In maritime scenes the seas presents a complicated clutter whose temporal/spatial coherence models and background reflectivity depends on a large number of factors and are still subject of research. Moreover the targets kinematics are influenced by the sea conditions, producing in some situations high alterations in the imaged target. These aspects make difficult the detectability analysis of vessels in maritime scenarios, requiring both theoretical models and numerical simulations. This thesis looks into the few available MTI techniques and deals experimentally with them in a developed simulator for maritime SAR images. The results are also presented in a image format, giving the sequence for one trial simulation and the asymptotic probability of detection for the simulated conditions.[CASTELLÀ] Los radares de apertura sintética (SAR) multicanal a bordo de satélites o plataformas aerotransportadas ofrecen la oportunidad de monitorizar el tráfico marítimo a través de instrumentos especialmente diseñados y procesando los datos recibidos de forma adecuada para rechazar la señal provocada por la reflexión del mar. A estas técnicas se las conoce como Moving Target Indication techniques (MTI) y la elección de la más adecuada depende del sistema y del entorno de aplicación. En escenarios marinos, el mar presenta un clutter complicado de modelar, cuya coherencia espacio-temporal y reflectividad radar dependen de un gran número de factores que hoy en día todavía siguen siendo investigados. Por otra parte los parámetros dinámicos del target estan influenciados por las condiciones del mar, produciendo en algunas situaciones graves alteraciones en la formación de la imagen. Estos aspectos dificultan el análisis de la detección de las embarcaciones, requiriendo modelos teóricos y simulaciones numéricas. Este Proyecto Final de Carrera investiga las técnicas MTI disponibles, aplicándolas sobre las imágenes marítimas generadas por un simulador SAR. Los resultados son la generación de los productos MTI en formato imagen y el cálculo de la probabilidad de detección para cada target.[CATALÀ] Els radars d'obertura sintètica (SAR) multicanal embarcats en satèl·lits o plataformes aerotransportades ofereixen l'oportunitat de monitoritzar el tràfic marítim a través d'instruments especialment dissenyats i processant les dades rebudes de forma adequada per rebutjar la senyal provocada per la reflexió del mar. A aquestes tècniques se les coneix com Moving Target indication techniques (MTI) i l'elecció de la més adequada depèn del sistema i de l'entorn d'aplicació. En escenaris marins, el mar presenta un clutter complicat de modelar, la coherència espai-temporal i reflectivitat radar depenen d'un gran nombre de factors que avui dia encara segueixen sent investigats. D'altra banda els paràmetres dinàmics del target estan influenciats per les condicions de la mar, produint en algunes situacions greus alteracions en la formació de la imatge. Aquests aspectes dificulten l'anàlisi de la detecció de les embarcacions, requerint models teòrics i simulacions numèriques. Aquest Projecte Final de Carrera investiga les tècniques MTI disponibles, aplicant-les sobre les imatges marítimes generades per un simulador SAR. Els resultats són la generació dels productes MTI en format imatge i el càlcul de la probabilitat asimptòtica de detecció per a cada target

The University Defence Research Collaboration In Signal Processing

This chapter describes the development of algorithms for automatic detection of anomalies from multi-dimensional, undersampled and incomplete datasets. The challenge in this work is to identify and classify behaviours as normal or abnormal, safe or threatening, from an irregular and often heterogeneous sensor network. Many defence and civilian applications can be modelled as complex networks of interconnected nodes with unknown or uncertain spatio-temporal relations. The behavior of such heterogeneous networks can exhibit dynamic properties, reflecting evolution in both network structure (new nodes appearing and existing nodes disappearing), as well as inter-node relations. The UDRC work has addressed not only the detection of anomalies, but also the identification of their nature and their statistical characteristics. Normal patterns and changes in behavior have been incorporated to provide an acceptable balance between true positive rate, false positive rate, performance and computational cost. Data quality measures have been used to ensure the models of normality are not corrupted by unreliable and ambiguous data. The context for the activity of each node in complex networks offers an even more efficient anomaly detection mechanism. This has allowed the development of efficient approaches which not only detect anomalies but which also go on to classify their behaviour

Signal processing for airborne bistatic radar

The major problem encountered by an airborne bistatic radar is the suppression of bistatic clutter. Unlike clutter echoes for a sidelooking airborne monostatic radar, bistatic clutter echoes are range dependent. Using training data from nearby range gates will result in widening of the clutter notch of STAP (space-time adaptive processing) processor. This will cause target returns from slow relative velocity aircraft to be suppressed or even go undetected. Some means of Doppler compensation for mitigating the clutter range dependency must be carried out. This thesis investigates the nature of the clutter echoes with different radar configurations. A novel Doppler compensation method using Doppler interpolation in the angle-Doppler domain and power correction for a JDL (joint domain localized) processor is proposed. Performing Doppler compensation in the Doppler domain, allows several different Doppler compensations to be carried out at the same time, using separate Doppler bins compensation. When using a JDL processor, a 2-D Fourier transformation is required to transform space-time domain training data into angular-Doppler domain. Performing Doppler compensation in the spacetime domain requires Fourier transformations of the Doppler compensated training data to be carried out for every training range gate. The whole process is then repeated for every range gate under test. On the other hand, Fourier transformations of the training data are required only once for all range gates under test, when using Doppler interpolation. Before carrying out any Doppler compensation, the peak clutter Doppler frequency difference between the training range gate and the range gate under test, needs to be determined. A novel way of calculating the Doppler frequency difference that is robust to error in pre-known parameters is also proposed. Reducing the computational cost of the STAP processor has always been the desire of any reduced dimension processors such as the JDL processor. Two methods of further reducing the computational cost of the JDL processor are proposed. A tuned DFT algorithm allow the size of the clutter sample covariance matrix of the JDL processor to be reduced by a factor proportional to the number of array elements, without losses in processor performance. Using alternate Doppler bins selection allows computational cost reduction, but with performance loss outside the clutter notch region. Different systems parameters are also used to evaluate the performance of the Doppler interpolation process and the JDL processor. Both clutter range and Doppler ambiguity exist in radar systems operating in medium pulse repetitive frequency mode. When suppressing range ambiguous clutter echoes, performing Doppler compensation for the clutter echoes arriving from the nearest ambiguous range alone, appear to be sufficient. Clutter sample covariance matrix is estimated using training data from the range or time or both dimension. Investigations on the number of range and time training data required for the estimation process in both space-time and angular-Doppler domain are carried out. Due to error in the Doppler compensation process, a method of using the minimum amount of range training data is proposed. The number of training data required for different clutter sample covariance matrix sizes is also evaluated. For Doppler interpolation and power correction JDL processor, the number of Doppler bins used can be increased, to reduce the amount of training data required, while maintaining certain desirable processor performance characteristics

Ground moving target indication with synthetic aperture radars for maritime surveillance

The explosive growth of shipping traffic all over the World, with around three quarters of the total trade goods and crude oil transported by sea, has raised newly emerging concerns (economical, ecological, social and geopolitical). Geo-information (location and speed) of ocean-going vessels is crucial in the maritime framework, playing a key role in the related environmental monitoring, fisheries management and maritime/coastal security. In this scenario space-based synthetic aperture radar (SAR) remote sensing is a potential tool for globally monitoring the oceans and seas, providing two-dimensional high-resolution imaging capabilities in all-day and all-weather conditions. The combination of ground moving target indication (GMTI) modes with multichannel spaceborne SAR systems represents a powerful apparatus for surveillance of maritime activities. The level of readiness of such a technology for road traffic monitoring is still low, and for the marine scenario is even less mature. Some of the current space-based SAR missions include an experimental GMTI mode with reduced detection capabilities, especially for small and slow moving targets. In this framework, this doctoral dissertation focuses on the study and analysis of the GMTI limitations of current state-of-the-art SAR missions when operating over maritime scenarios and the proposal of novel and optimal multichannel SAR-GMTI architectures, providing subclutter visibility of small (reduced reflectivity) slow moving vessels. This doctoral activity carries out a transversal analysis embracing system-architecture proposal and optimization, processing strategies assessment, performance evaluation, sea/ocean clutter characterization and adequate calibration methodologies suggestion. Firstly, the scarce availability of multichannel SAR-GMTI raw data and the related restrictions to access it have raised the need to implement flexible simulation tools for SAR-GMTI performance evaluation and mission. These simulation tools allow the comparative study and evaluation of the SAR-GMTI mode operated with current SAR missions, showing the reduced ability of these missions to detect small and slow boats in subclutter visibility. Improved performance is achieved with the new multichannel architecture based on non-uniformly distributed receivers (with external deployable antennas), setting the ground for future SAR-GMTI mission development. Some experimental multichannel SAR-GMTI data sets over the sea and acquired with two instruments, airborne F-SAR and spaceborne TerraSAR-X (TSX) platforms, have been processed to evaluate their detection capabilities as well as the adequate processing strategies (including channel balancing). This doctoral activity presents also a preliminary characterization of the sea clutter returns imaged by the spaceborne TSX instrument in a three-level basis, i.e., radiometric, statistical and polarimetric descriptions using experimental polarimetric data. This study has shown that the system-dependent limitations, such as thermal noise and temporal decorrelation, play a key role in the appropriate interpretation of the data and so should be properly included in the physical backscattering models of the sea. Current and most of the upcoming SAR missions are based on active phase array antennas (APAA) technology for the operation of multiple modes of acquisitions. The related calibration is a complex procedure due to the high number of different beams to be operated. Alternative internal calibration methodologies have been proposed and analyzed in the frame of this doctoral thesis. These approaches improved the radiometric calibration performance compared to the conventional ones. The presented formulation of the system errors as well as the proposed alternative strategies set the path to extrapolate the analysis for multichannel SAR systems.L'increment continu del tràfic marítim arreu del món, amb gairebé tres quartes parts del total de mercaderies i cru transportats per mar, porta associats uns impactes canviants a nivell econòmic, ambiental, social i geopolític. La geo-informació (localització i velocitat) dels vaixells té un paper fonamental en el monitoratge ambiental, la gestió de la pesca i la seguretat marítima/costanera. Els radars d'obertura sintètica (SAR, sigles en anglès) embarcats en satèl·lits són una eina molt potent per al monitoratge global dels oceans i dels mars, gràcies a la seva capacitat de generar imatges d'alta resolució amb independència de les condicions meteorològiques i de la llum solar. La detecció de blancs mòbils terrestres (GMTI, sigles en anglès) combinada amb sistemes multicanal SAR és fonamental per a la vigilància de les activitats marítimes. El nivell de maduresa d'aquesta tecnologia per monitorar tràfic rodat és baix, però per al cas marítim encara ho és més. Algunes missions SAR orbitals inclouen el mode GMTI, però amb unes capacitats de detecció reduïdes, especialment per a blancs petits i lents. En aquest marc, la tesi doctoral es centra en l'estudi i anàlisi de les limitacions GMTI dels actuals sistemes SAR operant en entorns marítims, proposant noves configuracions SAR-GMTI multicanal optimitzades per a la detecció de vaixells petits (emmascarats pels retrons radar del mar) i que es mouen lentament. La present dissertació doctoral du a terme un estudi transversal que abasta des de la proposta i optimització de sistemes/configuracions, passant per l'avaluació de les tècniques de processat, fins a l'estudi del rendiment de la missió, caracterització del mar i la valoració de noves metodologies de calibratge. En primer terme, diverses eines de simulació flexibles s'han implementat per poder avaluar les capacitats GMTI de diferents missions tenint en compte la poca disponibilitat de dades multicanal SAR-GMTI. Aquests simuladors permeten l'estudi comparatiu de les capacitats GMTI de les missions SAR orbitals actuals, demostrant les seves reduïdes opcions per identificar vaixells emmascarats pels retorns del mar. En el marc de l'activitat de recerca s'han processat dades experimentals SAR-GMTI multicanal de sistemes aeris (F-SAR) i orbitals (TerraSAR-X), per tal d'avaluar les seves capacitats de detecció de blancs mòbils sobre entorns marítims, proposant les estratègies de processat i calibratge més adients. Com a part de l'activitat de recerca doctoral, s'ha portat a terme una caracterització preliminar dels retorns radar del mar adquirits amb el sensor orbital TerraSAR-X, amb tres nivells d'anàlisi (radiomètric, estadístic i polarimètric). Aquest estudi demostra que aspectes com el soroll tèrmic i la decorrelació temporal, dependents del propi sensor i de l'entorn dinàmic del mar, poden limitar la correcta interpretació de les dades, i per tant, s'han d'incloure en els models físics dels mecanismes de dispersió del mar. Les missions SAR tant actuals com futures es basen en l'explotació de la tecnologia de les agrupacions d'antenes de fase activa (APAA) per operar diferents modes d'adquisició. El procés de calibratge associat és molt complex atès el gran nombre de feixos que es poden utilitzar. En el marc de la tesi doctoral s'han proposat i avaluat metodologies alternatives de calibratge intern per aquests sistemes, amb un millor rendiment en comparació amb les tècniques convencionals. Aquestes estratègies de calibratge, juntament amb la corresponent formulació dels errors de sistema, estableixen les bases per a l'estudi i avaluació en sistemes multicanal SA

The University Defence Research Collaboration In Signal Processing: 2013-2018

Signal processing is an enabling technology crucial to all areas of defence and security. It is called for whenever humans and autonomous systems are required to interpret data (i.e. the signal) output from sensors. This leads to the production of the intelligence on which military outcomes depend. Signal processing should be timely, accurate and suited to the decisions to be made. When performed well it is critical, battle-winning and probably the most important weapon which you’ve never heard of. With the plethora of sensors and data sources that are emerging in the future network-enabled battlespace, sensing is becoming ubiquitous. This makes signal processing more complicated but also brings great opportunities. The second phase of the University Defence Research Collaboration in Signal Processing was set up to meet these complex problems head-on while taking advantage of the opportunities. Its unique structure combines two multi-disciplinary academic consortia, in which many researchers can approach different aspects of a problem, with baked-in industrial collaboration enabling early commercial exploitation. This phase of the UDRC will have been running for 5 years by the time it completes in March 2018, with remarkable results. This book aims to present those accomplishments and advances in a style accessible to stakeholders, collaborators and exploiters

Air Force Institute of Technology Research Report 2010

This report summarizes the research activities of the Air Force Institute of Technology’s Graduate School of Engineering and Management. It describes research interests and faculty expertise; lists student theses/dissertations; identifies research sponsors and contributions; and outlines the procedures for contacting the school. Included in the report are: faculty publications, conference presentations, consultations, and funded research projects. Research was conducted in the areas of Aeronautical and Astronautical Engineering, Electrical Engineering and Electro-Optics, Computer Engineering and Computer Science, Systems and Engineering Management, Operational Sciences, Mathematics, Statistics and Engineering Physic

Air Force Institute of Technology Research Report 2009

This report summarizes the research activities of the Air Force Institute of Technology’s Graduate School of Engineering and Management. It describes research interests and faculty expertise; lists student theses/dissertations; identifies research sponsors and contributions; and outlines the procedures for contacting the school. Included in the report are: faculty publications, conference presentations, consultations, and funded research projects. Research was conducted in the areas of Aeronautical and Astronautical Engineering, Electrical Engineering and Electro-Optics, Computer Engineering and Computer Science, Systems and Engineering Management, Operational Sciences, Mathematics, Statistics and Engineering Physics