Modelling Aspects of Planar Multi-Mode Antennas for Direction-of-Arrival Estimation

Multi-mode antennas are an alternative to classical antenna arrays, and hence a promising emerging sensor technology for a vast variety of applications in the areas of array signal processing and digital communications. An unsolved problem is to describe the radiation pattern of multi-mode antennas in closed analytic form based on calibration measurements or on electromagnetic field (EMF) simulation data. As a solution, we investigate two modeling methods: One is based on the array interpolation technique (AIT), the other one on wavefield modeling (WM). Both methods are able to accurately interpolate quantized EMF data of a given multi-mode antenna, in our case a planar four-port antenna developed for the 6-8.5 GHz range. Since the modeling methods inherently depend on parameter sets, we investigate the influence of the parameter choice on the accuracy of both models. Furthermore, we evaluate the impact of modeling errors for coherent maximum-likelihood direction-of-arrival (DoA) estimation given different model parameters. Numerical results are presented for a single polarization component. Simulations reveal that the estimation bias introduced by model errors is subject to the chosen model parameters. Finally, we provide optimized sets of AIT and WM parameters for the multi-mode antenna under investigation. With these parameter sets, EMF data samples can be reproduced in interpolated form with high angular resolution

Antenna array calibration in wireless communications

Imperial Users onl

Wireless capsule gastrointestinal endoscopy: direction of arrival estimation based localization survey

One of the significant challenges in Capsule Endoscopy (CE) is to precisely determine the pathologies location. The localization process is primarily estimated using the received signal strength from sensors in the capsule system through its movement in the gastrointestinal (GI) tract. Consequently, the wireless capsule endoscope (WCE) system requires improvement to handle the lack of the capsule instantaneous localization information and to solve the relatively low transmission data rate challenges. Furthermore, the association between the capsule’s transmitter position, capsule location, signal reduction and the capsule direction should be assessed. These measurements deliver significant information for the instantaneous capsule localization systems based on TOA (time of arrival) approach, PDOA (phase difference of arrival), RSS (received signal strength), electromagnetic, DOA (direction of arrival) and video tracking approaches are developed to locate the WCE precisely. The current article introduces the acquisition concept of the GI medical images using the endoscopy with a comprehensive description of the endoscopy system components. Capsule localization and tracking are considered to be the most important features of the WCE system, thus the current article emphasizes the most common localization systems generally, highlighting the DOA-based localization systems and discusses the required significant research challenges to be addressed

Intelligent joint channel parameter estimation techniques for mobile wireless positioning applications

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Mobile wireless positioning has recently received great attention. For mobile wireless communication networks, an inherently suitable approach is to obtain the parameters that are used for positioning estimates from the radio signal measurements between a mobile device and one or more xed base stations. However, obtaining accurate estimates of these location-dependent channel parameters is a challenging task. The focus of this thesis is on the estimation of these channel parameters for mobile wireless positioning applications. In particular, we investigate novel estimators that jointly estimate more than one type of channel parameters. We rst perform a comprehensive critical review on the most recent and popular joint channel parameter estimation techniques. Secondly, we improve a state-of-the-art technique, namely the Space Alternating Generalised Expectation maximisation (SAGE) algorithm by employing adaptive interference cancellation to improve the estimation accuracy of weaker paths. Thirdly, a novel intelligent channel parameter estimation technique using Evolution Strategy (ES) is proposed to overcome the drawbacks of the existing iterative maximum likelihood methods. Furthermore, given that in reality it is di cult to obtain the number of multipath in advance, we propose a two tier Hierarchically Organised ES to jointly estimate the number of multipath as well as the channel parameters. Finally, we extend the proposed ES method to further estimate the Doppler shift in mobile environments. Our proposed intelligent joint channel estimation techniques are shown to exhibit excellent performance even with low Signal to Noise Ratio (SNR) channel conditions as well as robust against uncertainties in initialisations.EPSRC and Cambridge Silicon Radi

Generalized DOA and Source Number Estimation Techniques for Acoustics and Radar

The purpose of this thesis is to emphasize the lacking areas in the field of direction of arrival estimation and to propose building blocks for continued solution development in the area. A review of current methods are discussed and their pitfalls are emphasized. DOA estimators are compared to each other for usage on a conformal microphone array which receives impulsive, wideband signals. Further, many DOA estimators rely on the number of source signals prior to DOA estimation. Though techniques exist to achieve this, they lack robustness to estimate for certain signal types, particularly in the case where multiple radar targets exist in the same range bin. A deep neural network approach is proposed and evaluated for this particular case. The studies detailed in this thesis are specific to acoustic and radar applications for DOA estimation

Towards low power radio localisation

This work investigates the use of super-resolution algorithms for precision localisation and long-term tracking of small subjects, like rodents. An overview is given of a variety of techniques for positioning in use today, namely received signal strength, time of arrival, time difference of arrival and direction of arrival (DoA). Based on the analysis, it is concluded that the direction finding signal subspace based techniques are most appropriate for the purposes of our system. The details of the software defined radio (SDR) antenna array testbed development, build, characterisation and performance evaluation are presented. The results of direction finding experiments in the screened anechoic chamber emulating open-space propagation are discussed. It is shown that such testbed is capable of locating sources in the vicinity of the array with high precision. It can estimate the DoAs of more simultaneously working transmitters than antennas in the array, by employing spread spectrum techniques, and readily accommodates very low power sources. Overall constraints on the system are such that the operational range must be around 50 – 100 m. The transmitter must be small both volumetrically and in terms of weight. It also has to be operational over an extended period of around 1 year. The implications of these are that very small antennas and batteries must be used, which are usually accompanied by very low transmission efficiencies and tiny capacities, respectively. Based on the above, the use of ultra-low power oscillator transmitters, as first cut prototypes of the tag, is proposed. It is shown that the Clapp, Colpitts, Pierce and Cross-coupled architectures are adequate. A thorough analysis of these topologies is provided with full details of tag and antenna co-design. Finally the performance of these architectures is evaluated through simulations with respect to power output, overall efficiency and phase noise.Open Acces

Towards End-to-End Acoustic Localization using Deep Learning: from Audio Signal to Source Position Coordinates

This paper presents a novel approach for indoor acoustic source localization using microphone arrays and based on a Convolutional Neural Network (CNN). The proposed solution is, to the best of our knowledge, the first published work in which the CNN is designed to directly estimate the three dimensional position of an acoustic source, using the raw audio signal as the input information avoiding the use of hand crafted audio features. Given the limited amount of available localization data, we propose in this paper a training strategy based on two steps. We first train our network using semi-synthetic data, generated from close talk speech recordings, and where we simulate the time delays and distortion suffered in the signal that propagates from the source to the array of microphones. We then fine tune this network using a small amount of real data. Our experimental results show that this strategy is able to produce networks that significantly improve existing localization methods based on \textit{SRP-PHAT} strategies. In addition, our experiments show that our CNN method exhibits better resistance against varying gender of the speaker and different window sizes compared with the other methods.Comment: 18 pages, 3 figures, 8 table