MIMO Extension to DVB-SH

DVB-SH is a hybrid satellite-terrestrial system combining a satellite component and a complementary ground component to provide service in all types of environments, i.e., outdoor and indoor coverage in urban, sub-urban and rural. This paper reports the studies on multiple-input multiple-output (MIMO) extension to the existing DVB-SH standard. MIMO techniques are considered in this paper for achieving increased spectral efficiency and reliability in the challenging satellite and hybrid channel environment

Detection and decoding algorithms of multi-antenna diversity techniques for terrestrial DVB systems

This PhD dissertation analyzes the behavior of multi-antenna diversity techniques in broadcasting scenarios of TDT (terrestrial digital television) systems and proposes a low-complexity detection and decoding design for their practical implementation. For that purpose, the transmission-reception chains of the European DVB-T (Digital Video Broadcasting - Terrestrial) and DVB-T2 standards have been implemented over which diversity and MIMO (multiple-input multiple-output) techniques have been assessed through Monte Carlo simulations. On one hand, the most important multi-antenna diversity techniques such as CDD (cyclic delay diversity), Alamouti code-based SFBC (space-frequency block coding) and MRC (maximum ratio combining), have been evaluated in a DVB-T system over both fixed and mobile Rayleigh and Ricean channels. With the DVB-T2 standard release, multi-antenna processing has actually been introduced in digital television systems. The distributed SFBC configuration proposed in DVB-T2 is analyzed from a performance point of view considering different propagation conditions in an SFN (single frequency network). On the other hand, error-performance and detection complexity analyses of 2x2 FRFD (full-rate full-diversity) SFBCs are carried out for last-generation DTV (digital television) systems. The use of channel coding based on LDPC (low-density parity check) codes in new standards such as DVB-T2, involves a soft-output MAP (maximum a posteriori ) detection which results in an increase of the detection complexity. In order to study the FRFD codes behavior in such a BICM (bit-interleaved coded modulation) scheme, the Golden code, which achieves the maximum coding gain, and the Sezginer-Sari code, which has a lower inherent detection complexity as an expense of sacrificing performance gain, have been chosen. Using LSD (list sphere decoder) detection, BER (bit error rate) performance and computational cost results are provided for TDT scenarios. In order to overcome the variable complexity of the LSD, LFSD (list fixed-complexity sphere decoder) detection is proposed for practical implementations. A redesign of the previously proposed LFSD algorithm for spatial multiplexing MIMO systems has been performed for FRFD SFBCs with close-to-LSD performance. Furthermore, an analysis of the number of candidates is carried out in order to maximize the eficiency of the algorithm. Due to its fixed complexity, the novel algorithm can be fully pipelined making feasible a realistic implementation in chip.Esta tesis analiza el comportamiento de las técnicas de diversidad multiantena en escenarios de radiodifusión TDT (televisión digital terrestre) y propone un diseño de baja complejidad para la detección de códigos SFBC (space-frequency block coding ) que facilita una posible implementación práctica. Para ello, se ha implementado la cadena de transmisión-recepción de los estándares europeos DVB-T (Digital Video Broadcasting - Terrestrial ) y DVB-T2 como entorno de trabajo donde se han incluido y simulado diferentes técnicas de diversidad MIMO (multiple-input multiple-output ). Por un lado, se evalúan las técnicas de diversidad multiantena CDD ( cyclic delay diversity), SFBC con codi cación Alamouti y MRC (maximum ratio combining ) en escenarios fijos y móviles de canales tanto Rayleigh como Ricean para el sistema DVB-T. En DVB-T2, se analiza la tecnología multiantena propuesta por el estándar para diferentes escenarios de propagación dentro de redes SFN (single frequency network ). Por otro lado, se realiza un estudio sobre códigos FRFD (full-rate full-diversity ) SFBC para su posible inclusión en futuros estándares de televisión digital. El uso de codificaciones de canal más potentes, como los códigos LDPC (low-density parity check ), implica la utilización de una detección MAP (maximum a posteriori ) con salida soft, incrementando considerablemente la complejidad de la detección. Para realizar el correspondiente análisis de complejidad y rendimiento, se han escogidos dos códigos FRFD. Por un lado, el código Golden, que ofrece la máxima ganancia de código y, por otro, el código propuesto por Sezginer y Sari, que consigue reducir la complejidad de detección a costa de perder cierta ganancia de código. Se presentan resultados basados en curvas de BER (bit error rate) y número de operaciones sobre un sistema BICM (bit-interleaved coded modulation ) equivalente a DVB-T2 en escenarios TDT utilizando una detección LSD (list sphere decoder ). Para resolver el problema de la complejidad variable del algoritmo LSD, se realiza un rediseño del ya propuesto LFSD (list fixed-complexity sphere decoder ) para técnicas de multiplexación espacial considerando la estructura de los códigos FRFD SFBC. Asimismo, se evalúa el número de candidatos que ofrece un funcionamiento más eficiente con menor coste computacional. Los resultados de simulación basados en curvas de BER muestran rendimientos cercanos al detector LSD manteniendo el número de operaciones constante. Por lo tanto, este nuevo diseño permite su eficiente y práctica implementación en dispositivos reales.Doktoretza-tesi honen gai nagusia Lurreko Telebista Digitalerako antena anitzeko dibertsitate tekniken portaera ikertzea da, hartzailerako konplexutasun baxuko algoritmoen diseinua oinarri hartuta. Horretarako, Europako DVB-T eta DVB-T2 telebista digitaleko estandarren igorle-hartzaile kateen simulagailua inplementatzeaz gain, dibertsitate eta MIMO ( multipleinput multiple-output ) algoritmoak garatu eta aztertu dira. Lehenengo helburu gisa, CDD (cyclic delay diversity ), Alamouti kodean oinarritutako SFBC (space-frequency block coding ) eta MRC (maximum ratio combining ) teknikak ebaluatu dira Rayleigh eta Ricean ingurunetan, bai komunikazio nko zein mugikorretarako. Argitaratu berri den DVB-T2 estandarrak antena anitzeko prozesaketa telebista sistema digitalean sartu duenez, teknologia honen analisia egin da maiztasun bakarreko telebista sareetarako SFN (single frequency network ). Tesiaren helburu nagusia FRFD (full-rate full-diversity ) SFBC kodigoen ikerketa eta hauek telebista digitalaren estandar berrietan sartzea ahalbidetuko dituzten detekzio sistemen diseinua izan da. Kanalen kodi kazio indartsuagoak erabiltzeak, LDPC ( low-density parity check ) kodeak esaterako, MAP (maximum a posteriori ) algoritmoan oinarritutako soft irteeradun detektoreen erabilera dakar berekin, detekzioaren konplexutasuna areagotuz. Bi FRFD kode aukeratu dira errendimendu eta konplexutasun analisiak DVB-T2 bezalako BICM (bit-interleaved coded modulation ) sistemetan egiteko. Alde batetik, irabazi maximoa lortzen duen Golden kodea eta, bestetik, konplexutasun txikiagoa duen Sezginer eta Sarik proposatutako kodea erabili dira. Bit errore edo BER (bit error rate) tasan eta konputazio kostuan oinarrituta, emaitzak aurkeztu dira zerrenda dekodeatzaile esferikoa ( list sphere decoder, LSD) erabiliz. LSD-aren konplexutasun aldakorraren arazoa konpontzeko, ezpazio-multiplexazioko teknikarako LFSD (list xed-complexity sphere decoder ) algoritmoaren berdiseinua garatu da, FRFD SFBC kodeen egitura berezia kontuan hartuta. Algoritmoaren eraginkortasuna maximizatzeko kandidatuen zenbakia ebaluatzen da baita ere. LSD-en antzeko errendimendua duten BER gra ketan oinarritutako simulazio emaitzak aurkezten dira, eragiketa kopurua konstante eta LSD-arenaren baino murritzagoa mantenduz. Beraz, proposatutako diseinu eraginkorrak, FRFD SFBC antena anitzeko dibertsitatean oinarritutako eskemen inplementazioa ahalbidetu dezakete telebista digitalaren estandar berrietarako

Transmit and Receive Signal Processing for MIMO Terrestrial Broadcast Systems

[EN] Multiple-Input Multiple-Output (MIMO) technology in Digital Terrestrial Television (DTT) networks has the potential to increase the spectral efficiency and improve network coverage to cope with the competition of limited spectrum use (e.g., assignment of digital dividend and spectrum demands of mobile broadband), the appearance of new high data rate services (e.g., ultra-high definition TV - UHDTV), and the ubiquity of the content (e.g., fixed, portable, and mobile). It is widely recognised that MIMO can provide multiple benefits such as additional receive power due to array gain, higher resilience against signal outages due to spatial diversity, and higher data rates due to the spatial multiplexing gain of the MIMO channel. These benefits can be achieved without additional transmit power nor additional bandwidth, but normally come at the expense of a higher system complexity at the transmitter and receiver ends. The final system performance gains due to the use of MIMO directly depend on physical characteristics of the propagation environment such as spatial correlation, antenna orientation, and/or power imbalances experienced at the transmit aerials. Additionally, due to complexity constraints and finite-precision arithmetic at the receivers, it is crucial for the overall system performance to carefully design specific signal processing algorithms. This dissertation focuses on transmit and received signal processing for DTT systems using MIMO-BICM (Bit-Interleaved Coded Modulation) without feedback channel to the transmitter from the receiver terminals. At the transmitter side, this thesis presents investigations on MIMO precoding in DTT systems to overcome system degradations due to different channel conditions. At the receiver side, the focus is given on design and evaluation of practical MIMO-BICM receivers based on quantized information and its impact in both the in-chip memory size and system performance. These investigations are carried within the standardization process of DVB-NGH (Digital Video Broadcasting - Next Generation Handheld) the handheld evolution of DVB-T2 (Terrestrial - Second Generation), and ATSC 3.0 (Advanced Television Systems Committee - Third Generation), which incorporate MIMO-BICM as key technology to overcome the Shannon limit of single antenna communications. Nonetheless, this dissertation employs a generic approach in the design, analysis and evaluations, hence, the results and ideas can be applied to other wireless broadcast communication systems using MIMO-BICM.[ES] La tecnología de múltiples entradas y múltiples salidas (MIMO) en redes de Televisión Digital Terrestre (TDT) tiene el potencial de incrementar la eficiencia espectral y mejorar la cobertura de red para afrontar las demandas de uso del escaso espectro electromagnético (e.g., designación del dividendo digital y la demanda de espectro por parte de las redes de comunicaciones móviles), la aparición de nuevos contenidos de alta tasa de datos (e.g., ultra-high definition TV - UHDTV) y la ubicuidad del contenido (e.g., fijo, portable y móvil). Es ampliamente reconocido que MIMO puede proporcionar múltiples beneficios como: potencia recibida adicional gracias a las ganancias de array, mayor robustez contra desvanecimientos de la señal gracias a la diversidad espacial y mayores tasas de transmisión gracias a la ganancia por multiplexado del canal MIMO. Estos beneficios se pueden conseguir sin incrementar la potencia transmitida ni el ancho de banda, pero normalmente se obtienen a expensas de una mayor complejidad del sistema tanto en el transmisor como en el receptor. Las ganancias de rendimiento finales debido al uso de MIMO dependen directamente de las características físicas del entorno de propagación como: la correlación entre los canales espaciales, la orientación de las antenas y/o los desbalances de potencia sufridos en las antenas transmisoras. Adicionalmente, debido a restricciones en la complejidad y aritmética de precisión finita en los receptores, es fundamental para el rendimiento global del sistema un diseño cuidadoso de algoritmos específicos de procesado de señal. Esta tesis doctoral se centra en el procesado de señal, tanto en el transmisor como en el receptor, para sistemas TDT que implementan MIMO-BICM (Bit-Interleaved Coded Modulation) sin canal de retorno hacia el transmisor desde los receptores. En el transmisor esta tesis presenta investigaciones en precoding MIMO en sistemas TDT para superar las degradaciones del sistema debidas a diferentes condiciones del canal. En el receptor se presta especial atención al diseño y evaluación de receptores prácticos MIMO-BICM basados en información cuantificada y a su impacto tanto en la memoria del chip como en el rendimiento del sistema. Estas investigaciones se llevan a cabo en el contexto de estandarización de DVB-NGH (Digital Video Broadcasting - Next Generation Handheld), la evolución portátil de DVB-T2 (Second Generation Terrestrial), y ATSC 3.0 (Advanced Television Systems Commitee - Third Generation) que incorporan MIMO-BICM como clave tecnológica para superar el límite de Shannon para comunicaciones con una única antena. No obstante, esta tesis doctoral emplea un método genérico tanto para el diseño, análisis y evaluación, por lo que los resultados e ideas pueden ser aplicados a otros sistemas de comunicación inalámbricos que empleen MIMO-BICM.[CA] La tecnologia de múltiples entrades i múltiples eixides (MIMO) en xarxes de Televisió Digital Terrestre (TDT) té el potencial d'incrementar l'eficiència espectral i millorar la cobertura de xarxa per a afrontar les demandes d'ús de l'escàs espectre electromagnètic (e.g., designació del dividend digital i la demanda d'espectre per part de les xarxes de comunicacions mòbils), l'aparició de nous continguts d'alta taxa de dades (e.g., ultra-high deffinition TV - UHDTV) i la ubiqüitat del contingut (e.g., fix, portàtil i mòbil). És àmpliament reconegut que MIMO pot proporcionar múltiples beneficis com: potència rebuda addicional gràcies als guanys de array, major robustesa contra esvaïments del senyal gràcies a la diversitat espacial i majors taxes de transmissió gràcies al guany per multiplexat del canal MIMO. Aquests beneficis es poden aconseguir sense incrementar la potència transmesa ni l'ample de banda, però normalment s'obtenen a costa d'una major complexitat del sistema tant en el transmissor com en el receptor. Els guanys de rendiment finals a causa de l'ús de MIMO depenen directament de les característiques físiques de l'entorn de propagació com: la correlació entre els canals espacials, l'orientació de les antenes, i/o els desequilibris de potència patits en les antenes transmissores. Addicionalment, a causa de restriccions en la complexitat i aritmètica de precisió finita en els receptors, és fonamental per al rendiment global del sistema un disseny acurat d'algorismes específics de processament de senyal. Aquesta tesi doctoral se centra en el processament de senyal tant en el transmissor com en el receptor per a sistemes TDT que implementen MIMO-BICM (Bit-Interleaved Coded Modulation) sense canal de tornada cap al transmissor des dels receptors. En el transmissor aquesta tesi presenta recerques en precoding MIMO en sistemes TDT per a superar les degradacions del sistema degudes a diferents condicions del canal. En el receptor es presta especial atenció al disseny i avaluació de receptors pràctics MIMO-BICM basats en informació quantificada i al seu impacte tant en la memòria del xip com en el rendiment del sistema. Aquestes recerques es duen a terme en el context d'estandardització de DVB-NGH (Digital Video Broadcasting - Next Generation Handheld), l'evolució portàtil de DVB-T2 (Second Generation Terrestrial), i ATSC 3.0 (Advanced Television Systems Commitee - Third Generation) que incorporen MIMO-BICM com a clau tecnològica per a superar el límit de Shannon per a comunicacions amb una única antena. No obstant açò, aquesta tesi doctoral empra un mètode genèric tant per al disseny, anàlisi i avaluació, per la qual cosa els resultats i idees poden ser aplicats a altres sistemes de comunicació sense fils que empren MIMO-BICM.Vargas Paredero, DE. (2016). Transmit and Receive Signal Processing for MIMO Terrestrial Broadcast Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/66081TESISPremiad

Laboratory and field trials evaluation of transmit delay Diversity applied to DVB-T/H networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The requirements for future DVB-T/H networks demand that broadcasters design and deploy networks that provide ubiquitous reception in challenging indoors and other obstructed situations. It is essential that such networks are designed cost-effectively and with minimized environmental impact. The use of transmit diversity techniques with multiple antennas have long been proposed to improve the performance and capacity of wireless systems. Transmit diversity exploits the scattering effect inherent in the channel by means of transmitting multiple signals in a controlled manner from spatially separated antennas, allowing independently faded signals to arrive at the receiver and improves the chances of decoding a signal of acceptable quality. Transmit diversity can complement receive diversity by adding an additional diversity gain and in situations where receiver diversity is not practical, transmit diversity alone delivers a comparable amount of diversity gain. Transmit Delay Diversity (DD) can be applied to systems employing the DVB standard without receiver equipment modifications. Although transmit DD can provide a gain in NLOS situations, it can introduce degradation in LOS situation. The aim of this thesis is to investigate the effectiveness in real-word applications of novel diversity techniques for broadcast transmitter networks. Tests involved laboratory experiments using a wireless MIMO channel emulator and the deployment of a field measurement campaign dedicated to driving, indoor and rooftop reception. The relationship between the diversity gain, the propagation environment and several parameters such as the transmit antenna separation, the receiver speed and the Forward Error Correction Codes (FEC) configuration are investigated. Results includes the effect of real-word parameter usually not modeled in the software simulation analysis, such as antenna radiation patterns and mutual coupling, scattering vegetation impact, non-Gaussian noise sources and receiver implementation. Moreover, a practical analysis of the effectiveness of experimental techniques to mitigate the loss due to transmit DD loss in rooftop reception is presented. The results of this thesis confirmed, completed and extended the existing predictions with real word measurement results

Modelling and and measurement analysis of the satellite MIMO radio channel

The increasing demand for terrestrial and satellite delivered digital multimedia services has precipitated the problem of spectrum scarcity in recent years. This has resulted in deployment of spectral efficient technologies such as MIMO for terrestrial systems. However, MIMO cannot be easily deployed for the satellite channel using conventional spatial multiplexing as the channel conditions here are very different from the terrestrial case, and it is often dominated by line of sight fading. Orthogonal circular polarization, which has long been used for increasing both frequency reuse and the power spectral density available to earth-bound satellite terminals, has recently been recommended for directly increasing the throughput available to such devices. Following that theme, this thesis proposes a novel dual circular polarisation multiplexing (DCPM) technique, which is aimed at the burgeoning area of throughput-hungry digital video broadcasting via satellite to handheld devices (DVB-SH) and digital video broadcast to the next generation of hand held (DVB-NGH) systems. In determining the working limits of DCPM, a series of measurement campaigns have been performed, from which extensive dual circular polarised land mobile satellite (LMS) channel data has been derived. Using the newly available channel data and with the aid of statistical channel modelling tools found in literature, a new dual circular polarised LMS MIMO channel model has been developed. This model, in contrast with previously available LMS MIMO channel models, is simpler to implement since it uses a distinct state-based empirical-stochastic approach. The model has been found to be robust and it easily lends itself to rapid implementation for system level MIMO and DCPM analysis. Finally, by way of bit error rate (BER) analysis in different channel fading conditions, it has been determined when best to implement polarisation multiplexing or conventional . MIMO techniques for DVB-type land mobile receivers. It is recommended that DCPM be used when the channel in predominantly Ricean, with eo-polar channel Rice factors and sub-channel cross correlation values greater than 1dB and 0.40 respectively. The recommendations provided by this research are valuable contributions, which may help shape the evolving DVB-NGH standardisation process.EThOS - Electronic Theses Online ServiceGBUnited Kingdo