971 research outputs found
Development of a dc-ac power conditioner for wind generator by using neural network
This project present of development single phase DC-AC converter for wind
generator application. The mathematical model of the wind generator and Artificial
Neural Network control for DC-AC converter is derived. The controller is designed to
stabilize the output voltage of DC-AC converter. To verify the effectiveness of the
proposal controller, both simulation and experimental are developed. The simulation and
experimental result show that the amplitude of output voltage of the DC-AC converter
can be controlled
Otimização do fronthaul ótico para redes de acesso de rádio (baseadas) em computação em nuvem (CC-RANs)
Doutoramento conjunto (MAP-Tele) em Engenharia Eletrotécnica/TelecomunicaçõesA proliferação de diversos tipos de dispositivos moveis, aplicações e serviços
com grande necessidade de largura de banda têm contribuído para o aumento
de ligações de banda larga e ao aumento do volume de trafego das
redes de telecomunicações moveis. Este aumento exponencial tem posto
uma enorme pressão nos mobile operadores de redes móveis (MNOs). Um
dos aspetos principais deste recente desenvolvimento, é a necessidade que as
redes têm de oferecer baixa complexidade nas ligações, como também baixo
consumo energético, muito baixa latência e ao mesmo tempo uma grande
capacidade por baixo usto. De maneira a resolver estas questões, os MNOs
têm focado a sua atenção na redes de acesso por rádio em nuvem (C-RAN)
principalmente devido aos seus benefícios em termos de otimização de performance
e relação qualidade preço. O standard para a distribuição de sinais
sem fios por um fronthaul C-RAN é o common public radio interface (CPRI).
No entanto, ligações óticas baseadas em interfaces CPRI necessitam de uma
grande largura de banda. Estes requerimentos podem também ser atingidos
com uma implementação em ligação free space optical (FSO) que é um sistema
ótico que usa comunicação sem fios. O FSO tem sido uma alternativa
muito apelativa aos sistemas de comunicação rádio (RF) pois combinam a
flexibilidade e mobilidade das redes RF ao mesmo tempo que permitem a
elevada largura de banda permitida pelo sistema ótico. No entanto, as ligações
FSO são suscetíveis a alterações atmosféricas que podem prejudicar
o desempenho do sistema de comunicação. Estas limitações têm evitado o
FSO de ser tornar uma excelente solução para o fronthaul. Uma caracterização
precisa do canal e tecnologias mais avançadas são então necessárias
para uma implementação pratica de ligações FSO. Nesta tese, vamos estudar
uma implementação eficiente para fronthaul baseada em tecnologia
á rádio-sobre-FSO (RoFSO). Propomos expressões em forma fechada para
mitigação das perdas de propagação e para a estimação da capacidade do
canal de maneira a aliviar a complexidade do sistema de comunicação. Simulações
numéricas são também apresentadas para formatos de modulação
adaptativas. São também considerados esquemas como um sistema hibrido
RF/FSO e tecnologias de transmissão apoiadas por retransmissores
que ajudam a alivar os requerimentos impostos por um backhaul/fronthaul
de C-RAN. Os modelos propostos não só reduzem o esforço computacional,
como também têm outros méritos, tais como, uma elevada precisão na estimação
do canal e desempenho, baixo requisitos na capacidade de memória
e uma rápida e estável operação comparativamente com o estado da arte
em sistemas analíticos (PON)-FSO. Este sistema é implementado num recetor
em tempo real que é emulado através de uma field-programmable gate
array (FPGA) comercial. Permitindo assim um sistema aberto, interoperabilidade,
portabilidade e também obedecer a standards de software aberto.
Os esquemas híbridos têm a habilidade de suportar diferentes aplicações,
serviços e múltiplos operadores a partilharem a mesma infraestrutura de
fibra ótica.The proliferation of different mobile devices, bandwidth-intensive applications
and services contribute to the increase in the broadband connections
and the volume of traffic on the mobile networks. This exponential growth
has put considerable pressure on the mobile network operators (MNOs). In
principal, there is a need for networks that not only offer low-complexity,
low-energy consumption, and extremely low-latency but also high-capacity
at relatively low cost. In order to address the demand, MNOs have given significant
attention to the cloud radio access network (C-RAN) due to its beneficial
features in terms of performance optimization and cost-effectiveness.
The de facto standard for distributing wireless signal over the C-RAN fronthaul
is the common public radio interface (CPRI). However, optical links
based on CPRI interfaces requires large bandwidth. Also, the aforementioned
requirements can be realized with the implementation of free space
optical (FSO) link, which is an optical wireless system. The FSO is an appealing
alternative to the radio frequency (RF) communication system that
combines the flexibility and mobility offered by the RF networks with the
high-data rates provided by the optical systems. However, the FSO links are
susceptible to atmospheric impairments which eventually hinder the system
performance. Consequently, these limitations prevent FSO from being an
efficient standalone fronthaul solution. So, precise channel characterizations
and advanced technologies are required for practical FSO link deployment
and operation. In this thesis, we study an efficient fronthaul implementation
that is based on radio-on-FSO (RoFSO) technologies. We propose closedform
expressions for fading-mitigation and for the estimation of channel
capacity so as to alleviate the system complexity. Numerical simulations
are presented for adaptive modulation scheme using advanced modulation
formats. We also consider schemes like hybrid RF/FSO and relay-assisted
transmission technologies that can help in alleviating the stringent requirements
by the C-RAN backhaul/fronthaul. The propose models not only
reduce the computational requirements/efforts, but also have a number of
diverse merits such as high-accuracy, low-memory requirements, fast and
stable operation compared to the current state-of-the-art analytical based
approaches. In addition to the FSO channel characterization, we present
a proof-of-concept experiment in which we study the transmission capabilities
of a hybrid passive optical network (PON)-FSO system. This is
implemented with the real-time receiver that is emulated by a commercial
field-programmable gate array (FPGA). This helps in facilitating an
open system and hence enables interoperability, portability, and open software
standards. The hybrid schemes have the ability to support different
applications, services, and multiple operators over a shared optical fiber
infrastructure
Evaluation of Sigma-Delta-over-Fiber for High-Speed Wireless Applications
Future mobile communication networks aim to increase the communication speed,\ua0provide better reliability and improve the coverage. It needs to achieve all of these enhancements, while the number of users are increasing drastically. As a result, new base-station (BS) architectures where the signal processing is centralized and wireless access is provided through multiple, carefully coordinated remote radio heads are needed. Sigma-delta-over-fiber (SDoF) is a communication technique that can address both requirements and enable very low-complexity, phase coherent remote radio transmission, while transmitting wide-band communication signals with high quality. This thesis investigates the potential and limitations of SDoF communication links as an enabler for future mobile networks.In the first part of the thesis, an ultra-high-speed SDoF link is realized by using state-of-the-art vertical-cavity surface-emitting-lasers (VCSEL). The effects of VCSEL characteristics on such links in terms of signal quality, energy efficiency and potential lifespan is investigated. Furthermore, the potential and limitations of UHS-SDoF are evaluated with signals having various parameters. The results show that, low-cost, reliable, energy efficient, high signal quality SDoF links can be formed by using emerging VCSEL technology. Therefore, ultra-high-speed SDoF is a very promising technique for beyond 10~GHz communication systems.In the second part of the thesis, a multiple-input-multiple-output (MIMO) communication testbed with physically separated antenna elements, distributed-MIMO, is formed by multiple SDoF links. It is shown that the digital up-conversion, performed with a shared local-oscillator/clock at the central unit, provides excellent phase coherency between the physically distributed antenna elements. The proposed testbed demonstrates the advantages of SDoF for realizing distributed MIMO systems and is a powerful tool to perform various communication experiments in real environments.In general, SDoF is a solution for the downlink of a communication system, i.e. from central unit to remote radio head, however, the low complexity and low cost requirement of the remote radio heads makes it difficult to realize the uplinks of such systems. The third part of this thesis proposes an all-digital solution for realizing complementary uplinks for SDoF systems. The proposed structure is extensively investigated through simulations and measurements and the results demonstrate that it is possible realize all-digital, duplex, optical communication links between central units and remote radio heads.In summary, the results in this thesis demonstrate the potential of SDoF for wideband, distributed MIMO communication systems and proposes a new architecture for all-digital duplex communication links. Overall, the thesis shows that SDoF technique is powerful technique for emerging and future mobile communication networks, since it enables a centralized structure with low complexity remote radio heads and provides high signal quality
Digital Signal Processing Techniques Applied to Radio over Fiber Systems
The dissertation aims to analyze different Radio over Fiber systems for the front-haul applications. Particularly, analog radio over fiber (A-RoF) are simplest and suffer from nonlinearities, therefore, mitigating such nonlinearities through digital predistortion are studied. In particular for the long haul A-RoF links, direct digital predistortion technique (DPDT) is proposed which can be applied to reduce the impairments of A-RoF systems due to the combined effects of frequency chirp of the laser source and chromatic dispersion of the optical channel. Then, indirect learning architecture (ILA) based structures namely memory polynomial (MP), generalized memory polynomial (GMP) and decomposed vector rotation (DVR) models are employed to perform adaptive digital predistortion with low complexities. Distributed feedback (DFB) laser and vertical capacity surface emitting lasers (VCSELs) in combination with single mode/multi-mode fibers have been linearized with different quadrature amplitude modulation (QAM) formats for single and multichannel cases. Finally, a feedback adaptive DPD compensation is proposed. Then, there is still a possibility to exploit the other realizations of RoF namely digital radio over fiber (D-RoF) system where signal is digitized and transmits the digitized bit streams via digital optical communication links. The proposed solution is robust and immune to nonlinearities up-to 70 km of link length. Lastly, in light of disadvantages coming from A-RoF and D-RoF, it is still possible to take only the advantages from both methods and implement a more recent form knows as Sigma Delta Radio over Fiber (S-DRoF) system. Second Order Sigma Delta Modulator and Multi-stAge-noise-SHaping (MASH) based Sigma Delta Modulator are proposed. The workbench has been evaluated for 20 MHz LTE signal with 256 QAM modulation. Finally, The 6x2 GSa/s sigma delta modulators are realized on FPGA to show a real time demonstration of S-DRoF system. The demonstration shows that S-DRoF is a competitive competitor for 5G sub-6GHz band applications
Enabling Optical Wired and Wireless Technologies for 5G and Beyond Networks
The emerging fifth-generation mobile communications are envisaged to support massive number of deployment scenarios based on the respective use case requirements. The requirements can be efficiently attended with ultradense small-cell cloud radio access network (C-RAN) approach. However, the C-RAN architecture imposes stringent requirements on the transport networks. This book chapter presents high-capacity and low-latency optical wired and wireless networking solutions that are capable of attending to the network demands. Meanwhile, with optical communication evolutions, there has been advent of enhanced photonic integrated circuits (PICs). The PICs are capable of offering advantages such as low-power consumption, high-mechanical stability, low footprint, small dimension, enhanced functionalities, and ease of complex system architectures. Consequently, we exploit the PICs capabilities in designing and developing the physical layer architecture of the second standard of the next-generation passive optical network (NG-PON2) system. Apart from being capable of alleviating the associated losses of the transceiver, the proposed architectures aid in increasing the system power budget. Moreover, its implementation can significantly help in reducing the optical-electrical-optical conversions issue and the required number of optical connections, which are part of the main problems being faced in the miniaturization of network elements. Additionally, we present simulation results for the model validation
Recommended from our members
Fully-photonic digital radio over fibre for future super-broadband access network applications
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityIn this thesis a Fully-Photonic DRoF (FP-DRoF) system is proposed for deploying of future super-broadband access networks. Digital Radio over Fibre (DRoF) is more independent of the fibre network impairments and the length of fibre than the ARoF link. In order for fully optical deployment of the signal conversion techniques in the FP-DRoF architecture, two key components an Analogue-to-Digital Converter (ADC) and a Digital-to-Analogue Converter (DAC)) for data conversion are designed and their performance are investigated whereas the physical functionality is evaluated. The system simulation results of the proposed pipelined Photonic ADC (PADC) show that the PADC has 10 GHz bandwidth around 60 GHz of sampling rate. Furthermore, by
changing the bandwidth of the optical bandpass filter, switching to another band of sampling frequency provides optimised performance condition of the PADC. The PADC has low changes on the Effective Number of Bit (ENOB) response versus analogue RF input from 1 GHz up to 22 GHz for 60 GHz sampling frequency. The proposed 8-Bit pipelined PADC performance in terms of ENOB is evaluated at 60 Gigasample/s which is about 4.1. Recently, different methods have been reported by researchers to implement Photonic DACs
(PDACs), but their aim was to convert digital electrical signals to the corresponding analogue signal by assisting the optical techniques. In this thesis, a Binary Weighted PDAC (BW-PDAC) is proposed. In this BW-PDAC, optical digital signals are fully optically converted to an analogue signal. The spurious free dynamic range at the output of the PDAC in a back-to-back deployment of the PADC and the PDAC was 26.6 dBc. For further improvement in the system performance, a 3R (Retiming, Reshaping and Reamplifying) regeneration system is proposed in this thesis. Simulation results show that for an ultrashort RZ pulse with a 5% duty cycle at 65 Gbit/s using the proposed 3R regeneration system on a link reduces rms timing jitter by 90% while the regenerated pulse eye opening height is improved by 65%. Finally, in this thesis the proposed FP-DRoF functionality is evaluated whereas its performance is investigated through a dedicated and shared fibre links. The simulation results show (in the case of low level signal to noise ratio, in comparison with ARoF through
a dedicated fibre link) that the FP-DRoF has better BER performance than the ARoF in the order of 10-20. Furthermore, in order to realize a BER about 10-25 for the ARoF, the power penalty is about 4 dBm higher than the FP-DRoF link. The simulation results demonstrate that by considering 0.2 dB/km attenuation of a standard single mode fibre, the dedicated fibre length for the FP-DRoF link can be increased to about 20 km more than the ARoF link. Moreover, for performance assessment of the proposed FP-DRoF in a shared fibre link, the BER of the FP-DRoF link is about 10-10 magnitude less than the ARoF link for -19 dBm launched power into the fibre and the power penalty of the ARoF system is 10 dBm more than the FP-DRoF link. It is significant to increase the fibre link’s length of the FP-DRoF access network using common infrastructure. In addition, the simulation results are demonstrated that the FP-DRoF with non-uniform Wavelength Division Multiplexing (WDM) is more robust against four wave mixing impairment than the conventional WDM technique with uniform wavelength allocation and has better performance in terms of BER. It is clearly verified that the lunched power penalty at CS for DRoF link with uniform WDM techniques is about 2 dB higher than non-uniform WDM technique. Furthermore, uniform WDM method requires more bandwidth than non-uniform scheme which depends on the total number of channels and channels spacing
High Capacity Mode Division Multiplexing Based MIMO Enabled All-Optical Analog Millimeter-Wave Over Fiber Fronthaul Architecture for 5G and Beyond
The ever-increasing proliferation of mobile users and new technologies, and the demands for ubiquitous connectivity, high data capacity, faster data speed, low latency, and reliable services have been driven the quest for the next generation, fifth generation (5G), of the wireless networks. Cloud radio access network (C-RAN) has been identified as a promising architecture for addressing 5G requirements. However, C-RAN enforces stringent requirements on the fronthaul capacity and latency. To this end, several fronthaul solutions have been proposed in the literature, ranging from transporting digitized radio signals over fiber and functional splits to an entirely analog-radio-over fiber (A-RoF) based fronthual. A-RoF is a highly appealing transport solution for fronthual of 5G and beyond owing to its high bandwidth and energy efficiency, low system complexity, small footprint, cost-effectiveness, and low latency. In this paper, a high capacity multiple-input-multiple-output (MIMO) enabled all-optical analog-millimeter-wave-over fiber (A-MMWoF) fronthaul architecture is proposed for 5G and beyond of wireless networks. The proposed architecture employs photonic MMW signals generation and mode division multiplexing (MDM) along with wavelength division multiplexing (WDM) for transporting MMW MIMO signals in the optical domain. In support of the proposed architecture design, a comprehensive state-of-the-art literature review on the recent research works in high capacity A-RoF fronthaul systems and related transport technologies is presented. In addition, the corresponding potential challenges and solutions along with potential future directions are highlighted. The proposed design is flexible and scalable for achieving high capacity, high speed, and low latency fronthaul links
White Paper for Research Beyond 5G
The documents considers both research in the scope of evolutions of the 5G systems (for the period around 2025) and some alternative/longer term views (with later outcomes, or leading to substantial different design choices). This document reflects on four main system areas: fundamental theory and technology, radio and spectrum management; system design; and alternative concepts. The result of this exercise can be broken in two different strands: one focused in the evolution of technologies that are already ongoing development for 5G systems, but that will remain research areas in the future (with “more challenging” requirements and specifications); the other, highlighting technologies that are not really considered for deployment today, or that will be essential for addressing problems that are currently non-existing, but will become apparent when 5G systems begin their widespread deployment
- …