Analyzing helicopter evasive maneuver effectiveness against rocket-propelled grenades

It has long been acknowledged that military helicopters are vulnerable to ground-launched threats, in particular, the RPG-7 rocket-propelled grenade. Current helicopter threat mitigation strategies rely on a combination of operational tactics and selectively placed armor plating, which can help to mitigate but not entirely remove the threat. However, in recent years, a number of active protection systems designed to protect land-based vehicles from rocket and missile fire have been developed. These systems all use a sensor suite to detect, track, and predict the threat trajectory, which is then employed in the computation of an intercept trajectory for a defensive kill mechanism. Although a complete active protection system in its current form is unsuitable for helicopters, in this paper, it is assumed that the active protection system’s track and threat trajectory prediction subsystem could be used offline as a tool to develop tactics and techniques to counter the threat from rocket-propelled grenade attacks. It is further proposed that such a maneuver can be found by solving a pursuit–evasion differential game. Because the first stage in solving this problem is developing the capability to evaluate the game, nonlinear dynamic and spatial models for a helicopter, RPG-7 round, and gunner, and evasion strategies were developed and integrated into a new simulation engine. Analysis of the results from representative vignettes demonstrates that the simulation yields the value of the engagement pursuit–evasion game. It is also shown that, in the majority of cases, survivability can be significantly improved by performing an appropriate evasive maneuver. Consequently, this simulation may be used as an important tool for both designing and evaluating evasive tactics and is the first step in designing a maneuver-based active protection system, leading to improved rotorcraft survivability

A millimeter-wave radiometer for detecting microbursts

This paper describes a millimeter-wave radiometer for the detection of wind shear from airborne platforms or at airport terminals. This proposed instrument will operate near the group of atmospheric oxygen absorptions centered near 60 GHz, which it will use to sense temperature from a distance. The instrument will use two channels to provide two different temperature measurements, providing the basis for solution of two equations in two unknowns, which are range to the wind shear plume and its temperature. A third channel will measure ambient atmospheric temperature. Depending on the temperature difference between the wind-shear plume and ambient, the standard deviation of range measurement accuracy is expected to be about 1 km at 5 km range, while the temperature measurement standard deviation will be about one-fourth the temperature difference between plume and ambient at this range. The instrument is expected to perform usefully at ranges up to 10 km, giving adequate warning of the presence of wind shear even for high performance jet aircraft. Other atmospheric hazards which might be detected by this radiometer include aircraft wakes and vortices, clear-air turbulence, and wind rotors, although the latter two phenomena would be detected by an airborne version of the instrument. A separate radiometer channel will be provided in the proposed instrument to detect aircraft wakes and vortices based on perturbation of the spectrum of microscopic atmospheric temperature fluctuations caused by the passage of large aircraft

Glottal-synchronous speech processing

Glottal-synchronous speech processing is a field of speech science where the pseudoperiodicity of voiced speech is exploited. Traditionally, speech processing involves segmenting and processing short speech frames of predefined length; this may fail to exploit the inherent periodic structure of voiced speech which glottal-synchronous speech frames have the potential to harness. Glottal-synchronous frames are often derived from the glottal closure instants (GCIs) and glottal opening instants (GOIs). The SIGMA algorithm was developed for the detection of GCIs and GOIs from the Electroglottograph signal with a measured accuracy of up to 99.59%. For GCI and GOI detection from speech signals, the YAGA algorithm provides a measured accuracy of up to 99.84%. Multichannel speech-based approaches are shown to be more robust to reverberation than single-channel algorithms. The GCIs are applied to real-world applications including speech dereverberation, where SNR is improved by up to 5 dB, and to prosodic manipulation where the importance of voicing detection in glottal-synchronous algorithms is demonstrated by subjective testing. The GCIs are further exploited in a new area of data-driven speech modelling, providing new insights into speech production and a set of tools to aid deployment into real-world applications. The technique is shown to be applicable in areas of speech coding, identification and artificial bandwidth extension of telephone speec

Probability of Detection Study for Visual Inspection of Steel Bridges: Volume 2—Full Project Report

An inspector’s ability to correctly identify surface and internal defects in steel bridge components is critical to protecting public safety. Ensuring that inspectors are properly trained and adequately equipped to detect these defects in locations that are difficult to access and/or in unfavorable environmental conditions must be a high priority. While the Federal Highway Administration and individual state departments of transportation have guidelines for inspector qualifications, trainings, and certifications, there is very little emphasis placed on evaluating or “testing: a given inspector’s capability to characterize defects in the field. As a result, there is also very little, if any, data on how well a given inspector actually performs or the variability which can be expected between inspectors. This comprehensive Probability of Detection (POD) study was conducted to establish the ability of an inspector with the current required training to locate and quantify cracks in steel bridge components. This study is believed to be the first statistically-significant study of its kind in the United States

Applications of Computer Vision Technologies of Automated Crack Detection and Quantification for the Inspection of Civil Infrastructure Systems

Many components of existing civil infrastructure systems, such as road pavement, bridges, and buildings, are suffered from rapid aging, which require enormous nation\u27s resources from federal and state agencies to inspect and maintain them. Crack is one of important material and structural defects, which must be inspected not only for good maintenance of civil infrastructure with a high quality of safety and serviceability, but also for the opportunity to provide early warning against failure. Conventional human visual inspection is still considered as the primary inspection method. However, it is well established that human visual inspection is subjective and often inaccurate. In order to improve current manual visual inspection for crack detection and evaluation of civil infrastructure, this study explores the application of computer vision techniques as a non-destructive evaluation and testing (NDE&T) method for automated crack detection and quantification for different civil infrastructures. In this study, computer vision-based algorithms were developed and evaluated to deal with different situations of field inspection that inspectors could face with in crack detection and quantification. The depth, the distance between camera and object, is a necessary extrinsic parameter that has to be measured to quantify crack size since other parameters, such as focal length, resolution, and camera sensor size are intrinsic, which are usually known by camera manufacturers. Thus, computer vision techniques were evaluated with different crack inspection applications with constant and variable depths. For the fixed-depth applications, computer vision techniques were applied to two field studies, including 1) automated crack detection and quantification for road pavement using the Laser Road Imaging System (LRIS), and 2) automated crack detection on bridge cables surfaces, using a cable inspection robot. For the various-depth applications, two field studies were conducted, including 3) automated crack recognition and width measurement of concrete bridges\u27 cracks using a high-magnification telescopic lens, and 4) automated crack quantification and depth estimation using wearable glasses with stereovision cameras. From the realistic field applications of computer vision techniques, a novel self-adaptive image-processing algorithm was developed using a series of morphological transformations to connect fragmented crack pixels in digital images. The crack-defragmentation algorithm was evaluated with road pavement images. The results showed that the accuracy of automated crack detection, associated with artificial neural network classifier, was significantly improved by reducing both false positive and false negative. Using up to six crack features, including area, length, orientation, texture, intensity, and wheel-path location, crack detection accuracy was evaluated to find the optimal sets of crack features. Lab and field test results of different inspection applications show that proposed compute vision-based crack detection and quantification algorithms can detect and quantify cracks from different structures\u27 surface and depth. Some guidelines of applying computer vision techniques are also suggested for each crack inspection application