A nonlinear disturbance observer for robotic manipulators

A new nonlinear disturbance observer (NDO) for robotic manipulators is derived in this paper. The global exponential stability of the proposed disturbance observer (DO) is guaranteed by selecting design parameters, which depend on the maximum velocity and physical parameters of robotic manipulators. This new observer overcomes the disadvantages of existing DOs, which are designed or analyzed by linear system techniques. It can be applied in robotic manipulators for various purposes such as friction compensation, independent joint control, sensorless torque control and fault diagnosis. The performance of the proposed observer is demonstrated by the friction estimation and compensation for a two-link robotic manipulator. Both simulation and experimental results show the NDO works well

Sensorless torque/force control

Motion control systems represent a main subsystem for majority of processing systems that can be found in the industrial sector. These systems are concerned with the actuation of all devices in the manufacturing process such as machines, robots, conveyor systems and pick and place mechanisms such that they satisfy certain motion requirements, e.g., the pre specified reference trajectories are followed along with delivering the proper force or torque to the point of interest at which the process occurs. In general, the aim of force/torque control is to impose the desired force on the environment even if the environment has dynamical motion

A Stability Analysis for the Acceleration-based Robust Position Control of Robot Manipulators via Disturbance Observer

This paper proposes a new nonlinear stability analysis for the acceleration-based robust position control of robot manipulators by using Disturbance Observer (DOb). It is shown that if the nominal inertia matrix is properly tuned in the design of DOb, then the position error asymptotically goes to zero in regulation control and is uniformly ultimately bounded in trajectory tracking control. As the bandwidth of DOb and the nominal inertia matrix are increased, the bound of error shrinks, i.e., the robust stability and performance of the position control system are improved. However, neither the bandwidth of DOb nor the nominal inertia matrix can be freely increased due to practical design constraints, e.g., the robust position controller becomes more noise sensitive when they are increased. The proposed stability analysis provides insights regarding the dynamic behavior of DOb-based robust motion control systems. It is theoretically and experimentally proved that non-diagonal elements of the nominal inertia matrix are useful to improve the stability and adjust the trade-off between the robustness and noise sensitivity. The validity of the proposal is verified by simulation and experimental results.Comment: 9 pages, 9 figures, Journa

Force Estimation for Teleoperating Industrial Robots

As the energy on the particle accelerators or heavy ion accelerators such as CERN or GSI, fusion reactors such as JET or ITER, or other scientific experiments is increased, it is becoming increasingly necessary to use remote handling techniques in order to interact with the remote and radioactive environment

High precision motion control of parallel robots with imperfections and manufacturing tolerances

This work attempts to achieve precise motion control using parallel robots with manufacturing tolerances and inaccuracies by migrating the measurements from their joint space to task space in order to decrease control system’s sensitivity to any kinematical uncertainty rather than calibrating the parallel plant. The problem of dynamical model uncertainties and its effect on the derivation of the control law is also addressed in this work through disturbance estimation and compensation. Eventually, both task space measurement and disturbance estimation are combined to formulate a control framework that is unsensitive to either kinematical and dynamical system uncertainties

Disturbance Observer-based Robust Control and Its Applications: 35th Anniversary Overview

Disturbance Observer has been one of the most widely used robust control tools since it was proposed in 1983. This paper introduces the origins of Disturbance Observer and presents a survey of the major results on Disturbance Observer-based robust control in the last thirty-five years. Furthermore, it explains the analysis and synthesis techniques of Disturbance Observer-based robust control for linear and nonlinear systems by using a unified framework. In the last section, this paper presents concluding remarks on Disturbance Observer-based robust control and its engineering applications.Comment: 12 pages, 4 figure

Control strategies for robotic manipulators

This survey is aimed at presenting the major robust control strategies for rigid robot manipulators. The techniques discussed are feedback linearization/Computed torque control, Variable structure compensator, Passivity based approach and Disturbance observer based control. The first one is based on complete dynamic model of a robot. It results in simple linear control which offers guaranteed stability. Variable structure compensator uses a switching/relay action to overcome dynamic uncertainties and disturbances. Passivity based controller make use of passive structure of a robot. If passivity of a feedback system is proved, nonlinearities and uncertainties will not affect the stability. Disturbance observer based controllers estimate disturbances, which can be cancelled out to achieve a nominal model, for which a simple controller can then be designed. This paper, after explaining each control strategy in detail, finally compares these strategies for their pros and cons. Possible solutions to cope with the drawbacks have also been presented in tabular form. © 2012 IEEE

A nonlinear disturbance observer for robotic manipulators

A new nonlinear disturbance observer (NDO) for robotic manipulators is derived in this paper. The global exponential stability of the proposed disturbance observer (DO) is guaranteed by selecting design parameters, which depend on the maximum velocity and physical parameters of robotic manipulators. This new observer overcomes the disadvantages of existing DO’s, which are designed or analyzed by linear system techniques. It can be applied in robotic manipulators for various purposes such as friction compensation, independent joint control, sensorless torque control, and fault diagnosis. The performance of the proposed observer is demonstrated by the friction estimation and compensation for a two-link robotic manipulator. Both simulation and experimental results show the NDO works well