705 research outputs found
Dispensing with channel estimation: differentially modulated cooperative wireless communications
As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective
Symbol-Level Selective Full-Duplex Relaying with Power and Location Optimization
In this paper, a symbol-level selective transmission for full-duplex (FD)
relaying networks is proposed to mitigate error propagation effects and improve
system spectral efficiency. The idea is to allow the FD relay node to predict
the correctly decoded symbols of each frame, based on the generalized square
deviation method, and discard the erroneously decoded symbols, resulting in
fewer errors being forwarded to the destination node. Using the capability for
simultaneous transmission and reception at the FD relay node, our proposed
strategy can improve the transmission efficiency without extra cost of
signalling overhead. In addition, targeting on the derived expression for
outage probability, we compare it with half-duplex (HD) relaying case, and
provide the transmission power and relay location optimization strategy to
further enhance system performance. The results show that our proposed scheme
outperforms the classic relaying protocols, such as cyclic redundancy check
based selective decode-and-forward (S-DF) relaying and threshold based S-DF
relaying in terms of outage probability and bit-error-rate. Moreover, the
performances with optimal power allocation is better than that with equal power
allocation, especially when the FD relay node encounters strong
self-interference and/or it is close to the destination node.Comment: 34 pages (single-column), 14 figures, 2 tables, accepted pape
Relay Switching Aided Turbo Coded Hybrid-ARQ for Correlated Fading Channel
Hybrid-Automatic-Repeat-reQuest (HARQ) has become an indispensable technique in reliable communications systems. However, its performance is inevitably affected by the channel’s fading correlation. In this paper, we proposed a novel relay-switching aided HARQ scheme in order to mitigate the detrimental effects of correlated fading without unduly increasing the system’s complexity and delay. Our results show that the proposed relay-switching regime operates efficiently in correlated channels, hence significantly reduces the error floor of turbo-coded HARQ. Additionally, a HARQ scheme using Segment Selective Repeat (SSR) is incorporated in the relay-switching scheme for achieving further improvements. Quantitatively, the proposed relay-switching aided turbo-coded HARQ scheme using SSR may achieve an approximately 2 dB gain, compared to the conventional amplify-and-forward aided turbo coded HARQ arrangement using Chase Combining. Index Terms - Relay switching, correlated fading channel, Hybrid-ARQ, turbo codes, chase combining, incremental redundancy, selective segment repeat
Successive-relaying-aided decode-and-forward coherent versus noncoherent cooperative multicarrier space–time shift keying
Abstract—Successive-relaying-aided (SR) cooperative multi-carrier (MC) space–time shift keying (STSK) is proposed for frequency-selective channels. We invoke SR to mitigate the typical 50% throughput loss of conventional half-duplex relaying schemes and MC code-division multiple access (MC-CDMA) to circumvent the dispersive effects of wireless channels and to reduce the SR-induced interference. The distributed relay terminals form two virtual antenna arrays (VAAs), and the source node (SN) successively transmits frequency-domain (FD) spread signals to one of the VAAs, in addition to directly transmitting to the destination node (DN). The constituent relay nodes (RNs) of each VAA activate cyclic-redundancy-checking-based (CRC) selective decode-and-forward (DF) relaying. The DN can jointly detect the signals received via the SN-to-DN and VAA-to-DN links using a low-complexity single-stream-based joint maximum-likelihood (ML) detector. We also propose a differentially encoded cooperative MC-CDMA STSK scheme to facilitate communications over hostile dispersive channels without requiring channel estimation (CE). Dispensing with CE is important since the relays cannot be expected to altruistically estimate the SN-to-RN links for simply supporting the source. Furthermore, we propose soft-decision-aided serially concatenated recursive systematic convolutional (RSC) and unity-rate-coded (URC) cooperative MC STSK and investigate its performance in both coherent and noncoherent scenarios
Successive-relaying-aided decode-and-forward coherent versus noncoherent cooperative multicarrier space–time shift keying
Abstract—Successive-relaying-aided (SR) cooperative multi-carrier (MC) space–time shift keying (STSK) is proposed for frequency-selective channels. We invoke SR to mitigate the typical 50% throughput loss of conventional half-duplex relaying schemes and MC code-division multiple access (MC-CDMA) to circumvent the dispersive effects of wireless channels and to reduce the SR-induced interference. The distributed relay terminals form two virtual antenna arrays (VAAs), and the source node (SN) successively transmits frequency-domain (FD) spread signals to one of the VAAs, in addition to directly transmitting to the destination node (DN). The constituent relay nodes (RNs) of each VAA activate cyclic-redundancy-checking-based (CRC) selective decode-and-forward (DF) relaying. The DN can jointly detect the signals received via the SN-to-DN and VAA-to-DN links using a low-complexity single-stream-based joint maximum-likelihood (ML) detector. We also propose a differentially encoded cooperative MC-CDMA STSK scheme to facilitate communications over hostile dispersive channels without requiring channel estimation (CE). Dispensing with CE is important since the relays cannot be expected to altruistically estimate the SN-to-RN links for simply supporting the source. Furthermore, we propose soft-decision-aided serially concatenated recursive systematic convolutional (RSC) and unity-rate-coded (URC) cooperative MC STSK and investigate its performance in both coherent and noncoherent scenarios
Multi-Antenna Assisted Virtual Full-Duplex Relaying with Reliability-Aware Iterative Decoding
In this paper, a multi-antenna assisted virtual full-duplex (FD) relaying
with reliability-aware iterative decoding at destination node is proposed to
improve system spectral efficiency and reliability. This scheme enables two
half-duplex relay nodes, mimicked as FD relaying, to alternatively serve as
transmitter and receiver to relay their decoded data signals regardless the
decoding errors, meanwhile, cancel the inter-relay interference with
QR-decomposition. Then, by deploying the reliability-aware iterative
detection/decoding process, destination node can efficiently mitigate
inter-frame interference and error propagation effect at the same time.
Simulation results show that, without extra cost of time delay and signalling
overhead, our proposed scheme outperforms the conventional selective
decode-and-forward (S-DF) relaying schemes, such as cyclic redundancy check
based S-DF relaying and threshold based S-DF relaying, by up to 8 dB in terms
of bit-error-rate.Comment: 6 pages, 4 figures, conference paper has been submitte
Distributed Self-Concatenated Coding for Cooperative Communication
In this paper, we propose a power-efficient distributed binary self-concatenated coding scheme using iterative decoding (DSECCC-ID) for cooperative communications. The DSECCC-ID scheme is designed with the aid of binary extrinsic information transfer (EXIT) charts. The source node transmits self-concatenated convolutional coded (SECCC) symbols to both the relay and destination nodes during the first transmission period. The relay performs SECCC-ID decoding, where it mayor may not encounter decoding errors. It then reencodes the information bits using a recursive systematic convolutional (RSC) code during the second transmission period. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel concatenated encoder. At the destination node, three-component DSECCC-ID decoding is performed. The EXIT chart gives us an insight into operation of the distributed coding scheme, which enables us to significantly reduce the transmit power by about 3.3 dB in signal-to-noise ratio (SNR) terms, as compared with a noncooperative SECCC-ID scheme at a bit error rate (BER) of 10-5. Finally, the proposed system is capable of performing within about 1.5 dB from the two-hop relay-aided network’s capacity at a BER of 10-5 , even if there may be decoding errors at the relay
Relay-Induced Error Propagation Reduction for Decode-and-Forward Cooperative Communications
An attractive hybrid method of mitigating the effects of error propagation that may be imposed by the relay node (RN) on the destination node (DN) is proposed. We selected the most appropriate relay location for achieving a specific target Bit Error Ratio (BER) at the relay and signalled the RN-BER to the DN. The knowledge of this BER was then exploited by the decoder at the destination. Our simulation results show that when the BER at the RN is low, we do not have to activate the RN-BER aided decoder at the DN. However, when the RN-BER is high, significant system performance improvements may be achieved by activating the proposed RN-BER based decoding technique at the DN. For example, a power-reduction of up to about 19dB was recorded at a DN BER of 10-4
Selective Combining for Hybrid Cooperative Networks
In this study, we consider the selective combining in hybrid cooperative
networks (SCHCNs scheme) with one source node, one destination node and
relay nodes. In the SCHCN scheme, each relay first adaptively chooses between
amplify-and-forward protocol and decode-and-forward protocol on a per frame
basis by examining the error-detecting code result, and () relays will be selected to forward their received signals to the
destination. We first develop a signal-to-noise ratio (SNR) threshold-based
frame error rate (FER) approximation model. Then, the theoretical FER
expressions for the SCHCN scheme are derived by utilizing the proposed SNR
threshold-based FER approximation model. The analytical FER expressions are
validated through simulation results.Comment: 27 pages, 8 figures, IET Communications, 201
- …