2,708 research outputs found

    Vulnerability and resilience of cyber-physical power systems: results from an empirical-based study

    Full text link
    Power systems are undergoing a profound transformation towards cyber-physical systems. Disruptive changes due to energy system transition and the complexity of the interconnected systems expose the power system to new, unknown and unpredictable risks. To identify the critical points, a vulnerability assessment was conducted, involving experts from power as well as information and communication technologies (ICT) sectors. Weaknesses were identified e.g.,the lack of policy enforcement worsened by the unreadiness of involved actors. The complex dynamics of ICT makes it infeasible to keep a complete inventory of potential stressors to define appropriate preparation and prevention mechanisms. Therefore, we suggest applying a resilience management approach to increase the resilience of the system. It aims at a better ride through failures rather than building higher walls. We conclude that building resilience in cyber-physical power systems is feasible and helps in preparing for the unexpected

    Smart Grid Communications: Overview of Research Challenges, Solutions, and Standardization Activities

    Full text link
    Optimization of energy consumption in future intelligent energy networks (or Smart Grids) will be based on grid-integrated near-real-time communications between various grid elements in generation, transmission, distribution and loads. This paper discusses some of the challenges and opportunities of communications research in the areas of smart grid and smart metering. In particular, we focus on some of the key communications challenges for realizing interoperable and future-proof smart grid/metering networks, smart grid security and privacy, and how some of the existing networking technologies can be applied to energy management. Finally, we also discuss the coordinated standardization efforts in Europe to harmonize communications standards and protocols.Comment: To be published in IEEE Communications Surveys and Tutorial

    IoT-Based Cyber-Physical Communication Architecture: Challenges and Research Directions

    Get PDF
    In order to provide intelligent services, the Internet of Things (IoT) facilitates millions of smart cyber-physical devices to be enabled with network connectivity to sense, collect, process, and exchange information. Unfortunately, the traditional communication infrastructure is vulnerable to cyber attacks and link failures, so it is a challenging task for the IoT to explore these applications. In order to begin research and contribute into the IoT-based cyber-physical digital world, one will need to know the technical challenges and research opportunities. In this study, several key technical challenges and requirements for the IoT communication systems are identified. Basically, privacy, security, intelligent sensors/actuators design, low cost and complexity, universal antenna design, and friendly smart cyber-physical system design are the main challenges for the IoT implementation. Finally, the authors present a diverse set of cyber-physical communication system challenges such as practical implementation, distributed state estimation, real-time data collection, and system identification, which are the major issues require to be addressed in implementing an efficient and effective IoT communication system

    A Review of Current Research Trends in Power-Electronic Innovations in Cyber-Physical Systems.

    Get PDF
    In this paper, a broad overview of the current research trends in power-electronic innovations in cyber-physical systems (CPSs) is presented. The recent advances in semiconductor device technologies, control architectures, and communication methodologies have enabled researchers to develop integrated smart CPSs that can cater to the emerging requirements of smart grids, renewable energy, electric vehicles, trains, ships, internet of things (IoTs), etc. The topics presented in this paper include novel power-distribution architectures, protection techniques considering large renewable integration in smart grids, wireless charging in electric vehicles, simultaneous power and information transmission, multi-hop network-based coordination, power technologies for renewable energy and smart transformer, CPS reliability, transactive smart railway grid, and real-time simulation of shipboard power systems. It is anticipated that the research trends presented in this paper will provide a timely and useful overview to the power-electronics researchers with broad applications in CPSs.post-print2.019 K

    COMMUNICATION IN SMART GRIDS USING LTE

    Get PDF
    The world today is focusing on the enhancement of efficient use of energy and it has compelled the energy industry to research and seek for measures for increasing energy efficiency. Out of various fields related to energy, Smart Grid has emerged itself as one of the effective contributor to fulfill the approach of efficient use of energy. The term smart grid has been evolved from power grid where the energy is generated, distributed and finally consumed by a consumer. The smart form of this power grid is actually smart grid which facilitates smart way of communication of smart devices between grids, so that the effective mode of controlling and monitoring can be achieved. In order to achieve this, the devices should be smart enough so that they can be interoperable and remotely accessed. For the smart devices to communicate in real time so that controlling and remote access becomes possible, it demands an advanced communicating medium. LTE is one of the most challenging, famous and widely adopted communication technology that meets the requirement imposed by broadband wireless mobile communications. Early tests, evaluations and their pre-commercial deployments have proved that they fulfil all the requirements like high-data-rate, low latency and optimized system that advanced communication demands. Thus, this paper focuses on the evaluation of integration of LTE in Smart Grids so that automation in Smart Grids can be achieved.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

    Internet of Things Applications as Energy Internet in Smart Grids and Smart Environments

    Get PDF
    Energy Internet (EI) has been recently introduced as a new concept, which aims to evolve smart grids by integrating several energy forms into an extremely flexible and effective grid. In this paper, we have comprehensively analyzed Internet of Things (IoT) applications enabled for smart grids and smart environments, such as smart cities, smart homes, smart metering, and energy management infrastructures to investigate the development of the EI based IoT applications. These applications are promising key areas of the EI concept, since the IoT is considered one of the most important driving factors of the EI. Moreover, we discussed the challenges, open issues, and future research opportunities for the EI concept based on IoT applications and addressed some important research areas

    Detection of False Data Injection Attacks in Multi-Microgrid

    Get PDF
    In this thesis an Intrusion Detection System was developed to fight False Data Injection Attacks in Multi-Microgrids. Multi-Microgrids are a part of future power systems and they form the core part of critical infrastructure where resiliency and availability are exceedingly important. Severe consequences in the main power grid can happen if security is not taken into account. The Energy Management System has to be protected against cyber-attacks and one of the dire threats is a False Data Injection Attack. False Data Injections in Energy Management Systems are among the critical threats that need to be taken seriously as they can cause a major harm. In this thesis, the impact of a False Data Injection Attack on Multi-Microgrids and Energy Management Systems has been explored. It has also been researched how to detect these attacks by designing and developing a Multi-Microgrid model in MATLAB/Simulink for emulating the operation of Multi-Microgrid. The MATLAB/Simulink model simulates a Multi-Microgrid environment over the course of 24 hours. To detect False Data Injection Attacks from the data created in this simulation a Kalman Filter based Intrusion Detection System was developed. The Kalman Filter based Intrusion Detection System analyzes simulation data for possible False Data Injection Attacks. Further analysis was done based on the results of the Kalman Filter based Intrusion Detection System implementation. The implementation was tested with a set of attack simulations. The results analysis revealed that developed Kalman Filter based Intrusion Detection System is suitable for detecting simple attacks but it has low accuracy for complex intrusion attacks. With taking into account only the types of attacks the implementation was initially planned to detect the detection rate averaged to 87 %. The detection accuracy could be improved in future work by considering complex attack types early on in the implementation of the detection system. Securing power systems against malicious actors from causing harm or gaining financial benefits is a far-reaching research topic with plenty of future paths to explore. Kalman Filter based methods are one of the potential methods for detecting False Data Injection Attacks in Energy Management Systems. More research on Kalman Filter based protections is part of the ongoing race in protecting ourselves from cyber-attacks against critical infrastructure

    Cybersecurity Vulnerabilities in Smart Grids with Solar Photovoltaic: A Threat Modelling and Risk Assessment Approach

    Get PDF
    Cybersecurity is a growing concern for smart grids, especially with the integration of solar photovoltaics (PVs). With the installation of more solar and the advancement of inverters, utilities are provided with real-time solar power generation and other information through various tools. However, these tools must be properly secured to prevent the grid from becoming more vulnerable to cyber-attacks. This study proposes a threat modeling and risk assessment approach tailored to smart grids incorporating solar PV systems. The approach involves identifying, assessing, and mitigating risks through threat modeling and risk assessment. A threat model is designed by adapting and applying general threat modeling steps to the context of smart grids with solar PV. The process involves the identification of device assets and access points within the smart grid infrastructure. Subsequently, the threats to these devices were classified utilizing the STRIDE model. To further prioritize the identified threat, the DREAD threat-risk ranking model is employed. The threat modeling stage reveals several high-risk threats to the smart grid infrastructure, including Information Disclosure, Elevation of Privilege, and Tampering. Targeted recommendations in the form of mitigation controls are formulated to secure the smart grid’s posture against these identified threats. The risk ratings provided in this study offer valuable insights into the cybersecurity risks associated with smart grids incorporating solar PV systems, while also providing practical guidance for risk mitigation. Tailored mitigation strategies are proposed to address these vulnerabilities. By taking proactive measures, energy sector stakeholders may strengthen the security of their smart grid infrastructure and protect critical operations from potential cyber threats
    corecore