Two Compensation Strategies for Optimal Estimation in Sensor Networks with Random Matrices, Time-Correlated Noises, Deception Attacks and Packet Losses

Due to its great importance in several applied and theoretical fields, the signal estimation problem in multisensor systems has grown into a significant research area. Networked systems are known to suffer random flaws, which, if not appropriately addressed, can deteriorate the performance of the estimators substantially. Thus, the development of estimation algorithms accounting for these random phenomena has received a lot of research attention. In this paper, the centralized fusion linear estimation problem is discussed under the assumption that the sensor measurements are affected by random parameter matrices, perturbed by time-correlated additive noises, exposed to random deception attacks and subject to random packet dropouts during transmission. A covariance-based methodology and two compensation strategies based on measurement prediction are used to design recursive filtering and fixed-point smoothing algorithms. The measurement differencing method— typically used to deal with the measurement noise time-correlation—is unsuccessful for these kinds of systems with packet losses because some sensor measurements are randomly lost and, consequently, cannot be processed. Therefore, we adopt an alternative approach based on the direct estimation of the measurement noises and the innovation technique. The two proposed compensation scenarios are contrasted through a simulation example, in which the effect of the different uncertainties on the estimation accuracy is also evaluated.Ministerio de Ciencia e Innovacion, Agencia Estatal de InvestigacionEuropean Commission PID2021-124486NB-I0

A new approach to distributed fusion filtering for networked systems with random parameter matrices and correlated noises

This paper is concerned with the distributed filtering problem for a class of discrete-time stochastic systems over a sensor network with a given topology. The system presents the following main features: (i) random parameter matrices in both the state and observation equations are considered; and (ii) the process and measurement noises are one-step autocorrelated and two-step cross-correlated. The state estimation is performed in two stages. At the first stage, through an innovation approach, intermediate distributed least-squares linear filtering estimators are obtained at each sensor node by processing available output measurements not only from the sensor itself but also from its neighboring sensors according to the network topology. At the second stage, noting that at each sampling time not only the measurement but also an intermediate estimator is available at each sensor, attention is focused on the design of distributed filtering estimators as the least-squares matrix-weighted linear combination of the intermediate estimators within its neighborhood. The accuracy of both intermediate and distributed estimators, which is measured by the error covariance matrices, is examined by a numerical simulation example where a four-sensor network is considered. The example illustrates the applicability of the proposed results to a linear networked system with state-dependent multiplicative noise and different network-induced stochastic uncertainties in the measurements; more specifically, sensor gain degradation, missing measurements and multiplicative observation noises are considered as particular cases of the proposed observation model.This research is supported by Ministerio de Economía y Competitividad and Fondo Europeo de Desarrollo Regional FEDER (grant no. MTM2014- 52291-P, MTM2017-84199-P)

Networked distributed fusion estimation under uncertain outputs with random transmission delays, packet losses and multi-packet processing

This paper investigates the distributed fusion estimation problem for networked systems whose mul- tisensor measured outputs involve uncertainties modelled by random parameter matrices. Each sensor transmits its measured outputs to a local processor over different communication channels and random failures –one-step delays and packet dropouts–are assumed to occur during the transmission. White sequences of Bernoulli random variables with different probabilities are introduced to describe the ob- servations that are used to update the estimators at each sampling time. Due to the transmission failures, each local processor may receive either one or two data packets, or even nothing and, when the current measurement does not arrive on time, its predictor is used in the design of the estimators to compensate the lack of updated information. By using an innovation approach, local least-squares linear estimators (filter and fixed-point smoother) are obtained at the individual local processors, without requiring the signal evolution model. From these local estimators, distributed fusion filtering and smoothing estimators weighted by matrices are obtained in a unified way, by applying the least-squares criterion. A simula- tion study is presented to examine the performance of the estimators and the influence that both sensor uncertainties and transmission failures have on the estimation accuracy.This research is supported by Ministerio de Economía, Industria y Competitividad, Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional FEDER (grant no. MTM2017-84199-P)

Optimal Fusion Estimation with Multi-Step Random Delays and Losses in Transmission

This paper is concerned with the optimal fusion estimation problem in networked stochastic systems with bounded random delays and packet dropouts, which unavoidably occur during the data transmission in the network. The measured outputs from each sensor are perturbed by random parameter matrices and white additive noises, which are cross-correlated between the different sensors. Least-squares fusion linear estimators including filter, predictor and fixed-point smoother, as well as the corresponding estimation error covariance matrices are designed via the innovation analysis approach. The proposed recursive algorithms depend on the delay probabilities at each sampling time, but do not to need to know if a particular measurement is delayed or not. Moreover, the knowledge of the signal evolution model is not required, as the algorithms need only the first and second order moments of the processes involved. Some of the practical situations covered by the proposed system model with random parameter matrices are analyzed and the influence of the delays in the estimation accuracy are examined in a numerical example.This research is supported by the “Ministerio de Economía y Competitividad” and “Fondo Europeo de Desarrollo Regional” FEDER (Grant No. MTM2014-52291-P)

Multi-sensor multi-rate fusion estimation for networked systems: Advances and perspectives

National Natural Science Foundation of China under Grants 62103095, 61873058, 61873148 and 61933007; AHPU Youth Top-notch Talent Support Program of China under Grant 2018BJRC009; Natural Science Foundation of Anhui Province of China under Grant 2108085MA07; Royal Society of the UK; Alexander von Humboldt Foundation of Germany

Estimation, filtering and fusion for networked systems with network-induced phenomena: New progress and prospects

In this paper, some recent advances on the estimation, filtering and fusion for networked systems are reviewed. Firstly, the network-induced phenomena under consideration are briefly recalled including missing/fading measurements, signal quantization, sensor saturations, communication delays, and randomly occurring incomplete information. Secondly, the developments of the estimation, filtering and fusion for networked systems from four aspects (linear networked systems, nonlinear networked systems, complex networks and sensor networks) are reviewed comprehensively. Subsequently, some recent results on the estimation, filtering and fusion for systems with the network-induced phenomena are reviewed in great detail. In particular, some latest results on the multi-objective filtering problems for time-varying nonlinear networked systems are summarized. Finally, conclusions are given and several possible research directions concerning the estimation, filtering, and fusion for networked systems are highlighted

Centralized Fusion Approach to the Estimation Problem with Multi-Packet Processing under Uncertainty in Outputs and Transmissions

This paper is concerned with the least-squares linear centralized estimation problem in multi-sensor network systems from measured outputs with uncertainties modeled by random parameter matrices. These measurements are transmitted to a central processor over different communication channels, and owing to the unreliability of the network, random one-step delays and packet dropouts are assumed to occur during the transmissions. In order to avoid network congestion, at each sampling time, each sensor’s data packet is transmitted just once, but due to the uncertainty of the transmissions, the processing center may receive either one packet, two packets, or nothing. Different white sequences of Bernoulli random variables are introduced to describe the observations used to update the estimators at each sampling time. To address the centralized estimation problem, augmented observation vectors are defined by accumulating the raw measurements from the different sensors, and when the current measurement of a sensor does not arrive on time, the corresponding component of the augmented measured output predictor is used as compensation in the estimator design. Through an innovation approach, centralized fusion estimators, including predictors, filters, and smoothers are obtained by recursive algorithms without requiring the signal evolution model. A numerical example is presented to show how uncertain systems with state-dependent multiplicative noise can be covered by the proposed model and how the estimation accuracy is influenced by both sensor uncertainties and transmission failures.This research is supported by Ministerio de Economía, Industria y Competitividad, Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional FEDER (grant no. MTM2017-84199-P)

Distributed Detection and Estimation in Wireless Sensor Networks

Wireless sensor networks (WSNs) are typically formed by a large number of densely deployed, spatially distributed sensors with limited sensing, computing, and communication capabilities that cooperate with each other to achieve a common goal. In this dissertation, we investigate the problem of distributed detection, classification, estimation, and localization in WSNs. In this context, the sensors observe the conditions of their surrounding environment, locally process their noisy observations, and send the processed data to a central entity, known as the fusion center (FC), through parallel communication channels corrupted by fading and additive noise. The FC will then combine the received information from the sensors to make a global inference about the underlying phenomenon, which can be either the detection or classification of a discrete variable or the estimation of a continuous one.;In the domain of distributed detection and classification, we propose a novel scheme that enables the FC to make a multi-hypothesis classification of an underlying hypothesis using only binary detections of spatially distributed sensors. This goal is achieved by exploiting the relationship between the influence fields characterizing different hypotheses and the accumulated noisy versions of local binary decisions as received by the FC, where the influence field of a hypothesis is defined as the spatial region in its surrounding in which it can be sensed using some sensing modality. In the realm of distributed estimation and localization, we make four main contributions: (a) We first formulate a general framework that estimates a vector of parameters associated with a deterministic function using spatially distributed noisy samples of the function for both analog and digital local processing schemes. ( b) We consider the estimation of a scalar, random signal at the FC and derive an optimal power-allocation scheme that assigns the optimal local amplification gains to the sensors performing analog local processing. The objective of this optimized power allocation is to minimize the L 2-norm of the vector of local transmission powers, given a maximum estimation distortion at the FC. We also propose a variant of this scheme that uses a limited-feedback strategy to eliminate the requirement of perfect feedback of the instantaneous channel fading coefficients from the FC to local sensors through infinite-rate, error-free links. ( c) We propose a linear spatial collaboration scheme in which sensors collaborate with each other by sharing their local noisy observations. We derive the optimal set of coefficients used to form linear combinations of the shared noisy observations at local sensors to minimize the total estimation distortion at the FC, given a constraint on the maximum average cumulative transmission power in the entire network. (d) Using a novel performance measure called the estimation outage, we analyze the effects of the spatial randomness of the location of the sensors on the quality and performance of localization algorithms by considering an energy-based source-localization scheme under the assumption that the sensors are positioned according to a uniform clustering process

Personal Navigation Based on Wireless Networks and Inertial Sensors

Tato práce se zaměřuje na vývoj navigačního algoritmu pro systémy vhodné k lokalizaci osob v budovách a městských prostorech. Vzhledem k požadovaným nízkým nákladům na výsledný navigační systém byla uvažována integrace levných inerciálních senzorů a určování vzdálenosti na základě měření v bezdrátových sítích. Dále bylo předpokládáno, že bezdrátová síť bude určena k jiným účelům (např: měření a regulace), než lokalizace, proto bylo použito měření síly bezdrátového signálu. Kvůli snížení značné nepřesnosti této metody, byla navrhnuta technika mapování ztrát v bezdrátovém kanálu. Nejprve jsou shrnuty různé modely senzorů a prostředí a ty nejvhodnější jsou poté vybrány. Jejich efektivní a nové využití v navigační úloze a vhodná fůze všech dostupných informací jsou hlavní cíle této práce.This thesis deals with navigation system based on wireless networks and inertial sensors. The work aims at a development of positioning algorithm suitable for low-cost indoor or urban pedestrian navigation application. The sensor fusion was applied to increase the localization accuracy. Due to required low application cost only low grade inertial sensors and wireless network based ranging were taken into account. The wireless network was assumed to be preinstalled due to other required functionality (for example: building control) therefore only received signal strength (RSS) range measurement technique was considered. Wireless channel loss mapping method was proposed to overcome the natural uncertainties and restrictions in the RSS range measurements. The available sensor and environment models are summarized first and the most appropriate ones are selected secondly. Their effective and novel application in the navigation task, and favorable fusion (Particle filtering) of all available information are the main objectives of this thesis.