Challenges to the Integration of Renewable Resources at High System Penetration

Successfully integrating renewable resources into the electric grid at penetration levels to meet a 33 percent Renewables Portfolio Standard for California presents diverse technical and organizational challenges. This report characterizes these challenges by coordinating problems in time and space, balancing electric power on a range of scales from microseconds to decades and from individual homes to hundreds of miles. Crucial research needs were identified related to grid operation, standards and procedures, system design and analysis, and incentives, and public engagement in each scale of analysis. Performing this coordination on more refined scales of time and space independent of any particular technology, is defined as a “smart grid.” “Smart” coordination of the grid should mitigate technical difficulties associated with intermittent and distributed generation, support grid stability and reliability, and maximize benefits to California ratepayers by using the most economic technologies, design and operating approaches

Distribution System Voltage Management and Optimization for Integration of Renewables and Electric Vehicles: Research Gap Analysis

California is striving to achieve 33% renewable penetration by 2020 in accordance with the state’s Renewable Portfolio Standard (RPS). The behavior of renewable resources and electric vehicles in distribution systems is creating constraints on the penetration of these resources into the distribution system. One such constraint is the ability of present-­‐‑day voltage management methodologies to maintain proper distribution system voltage profiles in the face of higher penetrations of PV and electric vehicle technologies. This white paper describes the research gaps that have been identified in current Volt/VAR Optimization and Control (VVOC) technologies, the emerging technologies which are becoming available for use in VVOC, and the research gaps which exist and must be overcome in order to realize the full promise of these emerging technologies

A Comprehensive Method For Coordinating Distributed Energy Resources In A Power Distribution System

Utilities, faced with increasingly limited resources, strive to maintain high levels of reliability in energy delivery by adopting improved methodologies in planning, operation, construction and maintenance. On the other hand, driven by steady research and development and increase in sales volume, the cost of deploying PV systems has been in constant decline since their first introduction to the market. The increased level of penetration of distributed energy resources in power distribution infrastructure presents various benefits such as loss reduction, resilience against cascading failures and access to more diversified resources. However, serious challenges and risks must be addressed to ensure continuity and reliability of service. By integrating necessary communication and control infrastructure into the distribution system, to develop a practically coordinated system of distributed resources, controllable load/generation centers will be developed which provide substantial flexibility for the operation of the distribution system. On the other hand, such a complex distributed system is prone to instability and black outs due to lack of a major infinite supply and other unpredicted variations in load and generation, which must be addressed. To devise a comprehensive method for coordination between Distributed Energy Resources in order to achieve a collective goal, is the key point to provide a fully functional and reliable power distribution system incorporating distributed energy resources. A road map to develop such comprehensive coordination system is explained and supporting scenarios and their associated simulation results are then elaborated. The proposed road map describes necessary steps to build a comprehensive solution for coordination between multiple agents in a microgrid or distribution feeder.\u2

Distributed photovoltaic systems: Utility interface issues and their present status. Intermediate/three-phase systems

The interface issues between the intermediate-size Power Conditioning Subsystem (PCS) and the utility are considered. A literature review yielded facts about the status of identified issues

Voltage Rise Problem in Distribution Networks with Distributed Generation: A Review of Technologies, Impact and Mitigation Approaches

Energy demand has constantly been on the rise due to aggressive industrialization and civilization. This rise in energy demand results in the massive penetration of distributed generation (DG) in the distribution network (DN) which has been a holistic approach to enhance the capacity of distribution networks. However, this has led to a number of issues in the low voltage network, one of which is the voltage rise problem. This happens when generation exceeds demand thereby causing reverse power flow and consequently leading to overvoltage. A number of methods have been discussed in the literature to overcome this challenge ranging from network augmentation to active management of the distribution networks. This paper discusses the issue of voltage rise problem and its impact on distribution networks with high amounts of distributed energy resources (DERs). It presents different DG technologies such as those based on conventional and unconventional resources and other DERs such as battery storage systems and fuel cells. The study provides a comprehensive overview of approaches employed to curtail the issue of voltage increase at the point of common coupling (PCC), which includes strategies based on the network reinforcement methodology and the active distribution network management. A techno-economic comparison is then introduced in the paper to ascertain the similarities and dissimilarities of different mitigation approaches based on the technology involved, ease of deployment, cost implication, and their pros and cons. The paper provides insights into directions for future research in mitigating the impact of voltage rise presented by grid-connected DGs without limiting their increased penetration in the existing power grid

Open-Source, Open-Architecture SoftwarePlatform for Plug-InElectric Vehicle SmartCharging in California

This interdisciplinary eXtensible Building Operating System–Vehicles project focuses on controlling plug-in electric vehicle charging at residential and small commercial settings using a novel and flexible open-source, open-architecture charge communication and control platform. The platform provides smart charging functionalities and benefits to the utility, homes, and businesses.This project investigates four important areas of vehicle-grid integration research, integrating technical as well as social and behavioral dimensions: smart charging user needs assessment, advanced load control platform development and testing, smart charging impacts, benefits to the power grid, and smart charging ratepayer benefits

Distributed photovoltaic systems: Utility interface issues and their present status

Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design

Study of voltage fluctuations caused in a distribution grid by the connection of a wave energy converter and corrective actions based on reactive power compensation

Renewable energies, in general, have considerably increased their penetration in electrical power systems. However, they are intermittent energy sources, and large amounts of this power could create problems for the proper operation of the electrical network. In this sense, this paper studies the effects of wave energy generation on the voltages in a distribution network, using the IEEE 34-bus test feeder. In addition, corrective actions based on reactive power compensation, such as reactive compensation from the grid-side converter of the wave energy converter and the use of a STATCOM, are presented. The results show that the use of the grid-side converter as a reactive power compensator improves the voltage quality in the network, although its capability to mitigate voltage fluctuations is limited. The use of a complementary external STATCOM can provide for extra compensation if needed