1,331 research outputs found
Achieving Small World Properties using Bio-Inspired Techniques in Wireless Networks
It is highly desirable and challenging for a wireless ad hoc network to have
self-organization properties in order to achieve network wide characteristics.
Studies have shown that Small World properties, primarily low average path
length and high clustering coefficient, are desired properties for networks in
general. However, due to the spatial nature of the wireless networks, achieving
small world properties remains highly challenging. Studies also show that,
wireless ad hoc networks with small world properties show a degree distribution
that lies between geometric and power law. In this paper, we show that in a
wireless ad hoc network with non-uniform node density with only local
information, we can significantly reduce the average path length and retain the
clustering coefficient. To achieve our goal, our algorithm first identifies
logical regions using Lateral Inhibition technique, then identifies the nodes
that beamform and finally the beam properties using Flocking. We use Lateral
Inhibition and Flocking because they enable us to use local state information
as opposed to other techniques. We support our work with simulation results and
analysis, which show that a reduction of up to 40% can be achieved for a
high-density network. We also show the effect of hopcount used to create
regions on average path length, clustering coefficient and connectivity.Comment: Accepted for publication: Special Issue on Security and Performance
of Networks and Clouds (The Computer Journal
SoundCompass: a distributed MEMS microphone array-based sensor for sound source localization
Sound source localization is a well-researched subject with applications ranging from localizing sniper fire in urban battlefields to cataloging wildlife in rural areas. One critical application is the localization of noise pollution sources in urban environments, due to an increasing body of evidence linking noise pollution to adverse effects on human health. Current noise mapping techniques often fail to accurately identify noise pollution sources, because they rely on the interpolation of a limited number of scattered sound sensors. Aiming to produce accurate noise pollution maps, we developed the SoundCompass, a low-cost sound sensor capable of measuring local noise levels and sound field directionality. Our first prototype is composed of a sensor array of 52 Microelectromechanical systems (MEMS) microphones, an inertial measuring unit and a low-power field-programmable gate array (FPGA). This article presents the SoundCompass's hardware and firmware design together with a data fusion technique that exploits the sensing capabilities of the SoundCompass in a wireless sensor network to localize noise pollution sources. Live tests produced a sound source localization accuracy of a few centimeters in a 25-m2 anechoic chamber, while simulation results accurately located up to five broadband sound sources in a 10,000-m2 open field
Joint Wireless Information and Energy Transfer in a K-User MIMO Interference Channel
Recently, joint wireless information and energy transfer (JWIET) methods have
been proposed to relieve the battery limitation of wireless devices. However,
the JWIET in a general K-user MIMO interference channel (IFC) has been
unexplored so far. In this paper, we investigate for the first time the JWIET
in K-user MIMO IFC, in which receivers either decode the incoming information
data (information decoding, ID) or harvest the RF energy (energy harvesting,
EH). In the K-user IFC, we consider three different scenarios according to the
receiver mode -- i) multiple EH receivers and a single ID receiver, ii)
multiple IDs and a single EH, and iii) multiple IDs and multiple EHs. For all
scenarios, we have found a common necessary condition of the optimal
transmission strategy and, accordingly, developed the transmission strategy
that satisfies the common necessary condition, in which all the transmitters
transferring energy exploit a rank-one energy beamforming. Furthermore, we have
also proposed an iterative algorithm to optimize the covariance matrices of the
transmitters that transfer information and the powers of the energy beamforming
transmitters simultaneously, and identified the corresponding achievable
rate-energy tradeoff region. Finally, we have shown that by selecting EH
receivers according to their signal-to-leakage-and-harvested energy-ratio
(SLER), we can improve the achievable rate-energy region further.Comment: arXiv admin note: text overlap with arXiv:1303.169
Energy Efficient, Cooperative Communication in Low-Power Wireless Networks
The increased interest in massive deployment of wireless sensors and network densification requires more innovation in low-latency communication across multi-hop networks. Moreover, the resource constrained nature of sensor nodes calls for more energy efficient transmission protocols, in order to increase the battery life of said devices. Therefore, it is important to investigate possible technologies that would aid in improving energy efficiency and decreasing latency in wireless sensor networks (WSN) while focusing on application specific requirements. To this end, and based on state of the art Glossy, a low-power WSN flooding protocol, this dissertation introduces two energy efficient, cooperative transmission schemes for low-power communication in WSNs, with the aim of achieving performance gains in energy efficiency, latency and power consumption. These approaches apply several cooperative transmission technologies such as physical layer network coding and transmit beamforming. Moreover, mathematical tools such as convex optimization and game theory are used in order to analytically construct the proposed schemes. Then, system level simulations are performed, where the proposed schemes are evaluated based on different criteria.
First, in order to improve over all latency in the network as well as energy efficiency, MF-Glossy is proposed; a communication scheme that enables the simultaneous flooding of different packets from multiple sources to all nodes in the network. Using a communication-theoretic analysis, upper bounds on the performance of Glossy and MF-Glossy are determined. Further, simulation results show that MF-Glossy has the potential to achieve several-fold improvements in goodput and latency across a wide spectrum of network configurations at lower energy costs and comparable packet reception rates. Hardware implementation challenges are discussed as a step towards harnessing the potential of MF-Glossy in real networks, while focusing on key challenges and possible solutions.
Second, under the assumption of available channel state information (CSI) at all nodes, centralized and distributed beamforming and power control algorithms are proposed and their performance is evaluated. They are compared in terms of energy efficiency to standard Glossy. Numerical simulations demonstrate that a centralized power control scheme can achieve several-fold improvements in energy efficiency over Glossy across a wide spectrum of network configurations at comparable packet reception rates. Furthermore, the more realistic scenario where CSI is not available at transmitting nodes is considered. To battle CSI unavailability, cooperation is introduced on two stages. First, cooperation between receiving and transmitting nodes is proposed for the process of CSI acquisition, where the receivers provide the transmitters with quantized (e.g. imperfect) CSI. Then, cooperation within transmitting nodes is proposed for the process of multi-cast transmit beamforming. In addition to an analytical formulation of the robust multi-cast beamforming problem with imperfect CSI, its performance is evaluated, in terms of energy efficiency, through numerical simulations. It is shown that the level of cooperation, represented by the number of limited feedback bits from receivers to transmitters, greatly impacts energy efficiency. To this end, the optimization problem of finding the optimal number of feedback bits B is formulated, as a programming problem, under QoS constraints of 5% maximum outage. Numerical simulations show that there exists an optimal number of feedback bits that maximizes energy efficiency. Finally, the effect of choosing cooperating transmitters on energy efficiency is studied, where it is shown that an optimum group of cooperating transmit nodes, also known as a transmit coalition, can be formed in order to maximize energy efficiency. The investigated techniques including optimum feedback bits and transmit coalition formation can achieve a 100% increase in energy efficiency when compared to state of the art Glossy under same operation requirements in very dense networks.
In summary, the two main contributions in this dissertation provide insights on the possible performance gains that can be achieved when cooperative technologies are used in low-power wireless networks
An Energy-Efficient Controller for Wirelessly-Powered Communication Networks
In a wirelessly-powered communication network (WPCN), an energy access point
(E-AP) supplies the energy needs of the network nodes through radio frequency
wave transmission, and the nodes store their received energy in their batteries
for possible data transmission. In this paper, we propose an online control
policy for energy transfer from the E-AP to the wireless nodes and for data
transfer among the nodes. With our proposed control policy, all data queues of
the nodes are stable, while the average energy consumption of the network is
shown to be within a bounded gap of the minimum energy required for stabilizing
the network. Our proposed policy is designed using a quadratic Lyapunov
function to capture the limitations on the energy consumption of the nodes
imposed by their battery levels. We show that under the proposed control
policy, the backlog level in the data queues and the stored energy level in the
batteries fluctuate in small intervals around some constant levels.
Consequently, by imposing negligible average data drop rate, the data buffer
size and the battery capacity of the nodes can be significantly reduced
On the optimum number of cooperating nodes in interfered cluster-based sensor networks
This paper presents a cooperative multiple-input multiple-output (MIMO) scheme for a wireless sensor network consisting of inexpensive nodes, organised in clusters and transmitting data towards sinks. The transmission is affected by hardware imperfections, imperfect synchronisation, data correlation among nodes of the same cluster, channel estimation errors and interference among nodes of different clusters. Within this setting, we are interested in determining the number of nodes per cluster that maximises the energy efficiency of the network. The analysis is conducted in the asymptotic regime in which the number N of sensor nodes per cluster grows large without bound. Numerical results are used to validate the asymptotic analysis in the finite system regime and to investigate different configurations. It turns out that the optimum number of sensor nodes per cluster increases with the inter-cluster interference and with the number of sinks
- …