5,413 research outputs found
DeSyRe: on-Demand System Reliability
The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints
Towards an Adaptive Skeleton Framework for Performance Portability
The proliferation of widely available, but very different, parallel architectures
makes the ability to deliver good parallel performance
on a range of architectures, or performance portability, highly desirable.
Irregularly-parallel problems, where the number and size
of tasks is unpredictable, are particularly challenging and require
dynamic coordination.
The paper outlines a novel approach to delivering portable parallel
performance for irregularly parallel programs. The approach
combines declarative parallelism with JIT technology, dynamic
scheduling, and dynamic transformation.
We present the design of an adaptive skeleton library, with a task
graph implementation, JIT trace costing, and adaptive transformations.
We outline the architecture of the protoype adaptive skeleton
execution framework in Pycket, describing tasks, serialisation,
and the current scheduler.We report a preliminary evaluation of the
prototype framework using 4 micro-benchmarks and a small case
study on two NUMA servers (24 and 96 cores) and a small cluster
(17 hosts, 272 cores). Key results include Pycket delivering good
sequential performance e.g. almost as fast as C for some benchmarks;
good absolute speedups on all architectures (up to 120 on
128 cores for sumEuler); and that the adaptive transformations do
improve performance
Revisiting Actor Programming in C++
The actor model of computation has gained significant popularity over the
last decade. Its high level of abstraction makes it appealing for concurrent
applications in parallel and distributed systems. However, designing a
real-world actor framework that subsumes full scalability, strong reliability,
and high resource efficiency requires many conceptual and algorithmic additives
to the original model.
In this paper, we report on designing and building CAF, the "C++ Actor
Framework". CAF targets at providing a concurrent and distributed native
environment for scaling up to very large, high-performance applications, and
equally well down to small constrained systems. We present the key
specifications and design concepts---in particular a message-transparent
architecture, type-safe message interfaces, and pattern matching
facilities---that make native actors a viable approach for many robust,
elastic, and highly distributed developments. We demonstrate the feasibility of
CAF in three scenarios: first for elastic, upscaling environments, second for
including heterogeneous hardware like GPGPUs, and third for distributed runtime
systems. Extensive performance evaluations indicate ideal runtime behaviour for
up to 64 cores at very low memory footprint, or in the presence of GPUs. In
these tests, CAF continuously outperforms the competing actor environments
Erlang, Charm++, SalsaLite, Scala, ActorFoundry, and even the OpenMPI.Comment: 33 page
A runtime heuristic to selectively replicate tasks for application-specific reliability targets
In this paper we propose a runtime-based selective task replication technique for task-parallel high performance computing applications. Our selective task replication technique is automatic and does not require modification/recompilation of OS, compiler or application code. Our heuristic, we call App_FIT, selects tasks to replicate such that the specified reliability target for an application is achieved. In our experimental evaluation, we show that App FIT selective replication heuristic is low-overhead and highly scalable. In addition, results indicate that complete task replication is overkill for achieving reliability targets. We show that with App FIT, we can tolerate pessimistic exascale error rates with only 53% of the tasks being replicated.This work was supported by FI-DGR 2013 scholarship and the European Community’s
Seventh Framework Programme [FP7/2007-2013] under the Mont-blanc 2
Project (www.montblanc-project.eu), grant agreement no. 610402 and in part by the
European Union (FEDER funds) under contract TIN2015-65316-P.Peer ReviewedPostprint (author's final draft
Architectural support for task dependence management with flexible software scheduling
The growing complexity of multi-core architectures has motivated a wide range of software mechanisms to improve the orchestration of parallel executions. Task parallelism has become a very attractive approach thanks to its programmability, portability and potential for optimizations. However, with the expected increase in core counts, finer-grained tasking will be required to exploit the available parallelism, which will increase the overheads introduced by the runtime system. This work presents Task Dependence Manager (TDM), a hardware/software co-designed mechanism to mitigate runtime system overheads. TDM introduces a hardware unit, denoted Dependence Management Unit (DMU), and minimal ISA extensions that allow the runtime system to offload costly dependence tracking operations to the DMU and to still perform task scheduling in software. With lower hardware cost, TDM outperforms hardware-based solutions and enhances the flexibility, adaptability and composability of the system. Results show that TDM improves performance by 12.3% and reduces EDP by 20.4% on average with respect to a software runtime system. Compared to a runtime system fully implemented in hardware, TDM achieves an average speedup of 4.2% with 7.3x less area requirements and significant EDP reductions. In addition, five different software schedulers are evaluated with TDM, illustrating its flexibility and performance gains.This work has been supported by the RoMoL ERC Advanced Grant (GA 321253), by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and
Innovation (contracts TIN2015-65316-P, TIN2016-76635-C2-2-R and TIN2016-81840-REDT), by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272), and by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671697 and No. 671610. M. Moretó has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship number JCI-2012-15047.Peer ReviewedPostprint (author's final draft
TaskPoint: sampled simulation of task-based programs
Sampled simulation is a mature technique for reducing simulation time of single-threaded programs, but it is not directly applicable to simulation of multi-threaded architectures. Recent multi-threaded sampling techniques assume that the workload assigned to each thread does not change across multiple executions of a program. This assumption does not hold for dynamically scheduled task-based programming models. Task-based programming models allow the programmer to specify program segments as tasks which are instantiated many times and scheduled dynamically to available threads. Due to system noise and variation in scheduling decisions, two consecutive executions on the same machine typically result in different instruction streams processed by each thread. In this paper, we propose TaskPoint, a sampled simulation technique for dynamically scheduled task-based programs. We leverage task instances as sampling units and simulate only a fraction of all task instances in detail. Between detailed simulation intervals we employ a novel fast-forward mechanism for dynamically scheduled programs. We evaluate the proposed technique on a set of 19 task-based parallel benchmarks and two different architectures. Compared to detailed simulation, TaskPoint accelerates architectural simulation with 64 simulated threads by an average factor of 19.1 at an average error of 1.8% and a maximum error of 15.0%.This work has been supported by the Spanish Government (Severo Ochoa grants SEV2015-0493, SEV-2011-00067), the Spanish Ministry of Science and Innovation
(contract TIN2015-65316-P), Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272), the RoMoL ERC Advanced Grant (GA 321253), the European HiPEAC Network of Excellence and the Mont-Blanc project (EU-FP7-610402 and EU-H2020-671697). M. Moreto has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship JCI-2012-15047. M. Casas is supported by the Ministry of Economy
and Knowledge of the Government of Catalonia and the Cofund programme of the Marie Curie Actions of the EUFP7 (contract 2013BP B 00243). T.Grass has been partially
supported by the AGAUR of the Generalitat de Catalunya (grant 2013FI B 0058).Peer ReviewedPostprint (author's final draft
Experimental Performance Evaluation of Cloud-Based Analytics-as-a-Service
An increasing number of Analytics-as-a-Service solutions has recently seen
the light, in the landscape of cloud-based services. These services allow
flexible composition of compute and storage components, that create powerful
data ingestion and processing pipelines. This work is a first attempt at an
experimental evaluation of analytic application performance executed using a
wide range of storage service configurations. We present an intuitive notion of
data locality, that we use as a proxy to rank different service compositions in
terms of expected performance. Through an empirical analysis, we dissect the
performance achieved by analytic workloads and unveil problems due to the
impedance mismatch that arise in some configurations. Our work paves the way to
a better understanding of modern cloud-based analytic services and their
performance, both for its end-users and their providers.Comment: Longer version of the paper in Submission at IEEE CLOUD'1
- …