Design of deadlock detection and prevention algorithms in distributed systems

A distributed system consists of a collection of processes which communicate with each other by exchanging messages to achieve a common goal. One of the key problems in distributed systems is the possibility of deadlock. Processes are said to be deadlocked when some processes are blocked on resource requests that can never be satisfied unless drastic systems action is taken. Two distributed deadlock detection algorithms handling multiple outstanding requests is proposed and are proven to be correct: it detects all cycles and does not detect false deadlocks. The algorithms are based on the concept of chasing the edge of the waitfor graph (probe-based). Simulation results show that the proposed algorithm performs very well compared to some existing algorithms. A deadlock prevention algorithm based on the notion of coloring the nodes of the waitfor graph is also proposed. Rollback is quite less compared to some existing algorithms

The Nornir run-time system for parallel programs using Kahn process networks on multi-core machines – A flexible alternative to MapReduce

Even though shared-memory concurrency is a paradigm frequently used for developing parallel applications on small- and middle-sized machines, experience has shown that it is hard to use. This is largely caused by synchronization primitives which are low-level, inherently non-deterministic, and, consequently, non-intuitive to use. In this paper, we present the Nornir run-time system. Nornir is comparable to well-known frameworks such as MapReduce and Dryad that are recognized for their efficiency and simplicity. Unlike these frameworks, Nornir also supports process structures containing branches and cycles. Nornir is based on the formalism of Kahn process networks, which is a shared-nothing, message-passing model of concurrency. We deem this model a simple and deterministic alternative to shared-memory concurrency. Experiments with real and synthetic benchmarks on up to 8 CPUs show that performance in most cases scales almost linearly with the number of CPUs, when not limited by data dependencies. We also show that the modeling flexibility allows Nornir to outperform its MapReduce counterparts using well-known benchmarks. This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited

Simulationsgestützte Lösung von Deadlocks bei fahrerlosen Transportsystemen mit Hilfe von Deep Reinforcement Learning

This paper discusses the use of deep reinforcement learning to resolve deadlocks in material flow systems with automated guided vehicles (AGVs). The paper proposes a strategy for dealing with deadlocks based on a single Agent reinforcement learning approach (SARL). The agent will find the optimal solution strategy in real time. The proposed approach is evaluated using a material flow simulation for a real use case in industry. The effectiveness in reducing the occurrence of deadlocks as well as the number of collisions in the system is demonstrated. This study highlights the potential of deep reinforcement learning for improving the performance and efficiency of material flow systems with AGVs

Achieving Functional Correctness in Large Interconnect Systems.

In today's semi-conductor industry, large chip-multiprocessors and systems-on-chip are being developed, integrating a large number of components on a single chip. The sheer size of these designs and the intricacy of the communication patterns they exhibit have propelled the development of network-on-chip (NoC) interconnects as the basis for the communication infrastructure in these systems. Faced with the interconnect's growing size and complexity, several challenges hinder its effective validation. During the interconnect's development, the functional verification process relies heavily on the use of emulation and post-silicon validation platforms. However, detecting and debugging errors on these platforms is a difficult endeavour due to the limited observability, and in turn the low verification capabilities, they provide. Additionally, with the inherent incompleteness of design-time validation efforts, the potential of design bugs escaping into the interconnect of a released product is also a concern, as these bugs can threaten the viability of the entire system. This dissertation provides solutions to enable the development of functionally correct interconnect designs. We first address the challenges encountered during design-time verification efforts, by providing two complementary mechanisms that allow emulation and post-silicon verification frameworks to capture a detailed overview of the functional behaviour of the interconnect. Our first solution re-purposes the contents of in-flight traffic to log debug data from the interconnect's execution. This approach enables the validation of the interconnect using synthetic traffic workloads, while attaining over 80% observability of the routes followed by packets and capturing valuable debugging information. We also develop an alternative mechanism that boosts observability by taking periodic snapshots of execution, thus extending the verification capabilities to run both synthetic traffic and real-application workloads. The collected snapshots enhance detection and debugging support, and they provide observability of over 50% of packets and reconstructs at least half of each of their routes. Moreover, we also develop error detection and recovery solutions to address the threat of design bugs escaping into the interconnect's runtime operation. Our runtime techniques can overcome communication errors without needing to store replicate copies of all in-flight packets, thereby achieving correctness at minimal area costsPhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116741/1/rawanak_1.pd

Embedded dynamic programming networks for networks-on-chip

PhD ThesisRelentless technology downscaling and recent technological advancements in three dimensional integrated circuit (3D-IC) provide a promising prospect to realize heterogeneous system-on-chip (SoC) and homogeneous chip multiprocessor (CMP) based on the networks-onchip (NoCs) paradigm with augmented scalability, modularity and performance. In many cases in such systems, scheduling and managing communication resources are the major design and implementation challenges instead of the computing resources. Past research efforts were mainly focused on complex design-time or simple heuristic run-time approaches to deal with the on-chip network resource management with only local or partial information about the network. This could yield poor communication resource utilizations and amortize the benefits of the emerging technologies and design methods. Thus, the provision for efficient run-time resource management in large-scale on-chip systems becomes critical. This thesis proposes a design methodology for a novel run-time resource management infrastructure that can be realized efficiently using a distributed architecture, which closely couples with the distributed NoC infrastructure. The proposed infrastructure exploits the global information and status of the network to optimize and manage the on-chip communication resources at run-time. There are four major contributions in this thesis. First, it presents a novel deadlock detection method that utilizes run-time transitive closure (TC) computation to discover the existence of deadlock-equivalence sets, which imply loops of requests in NoCs. This detection scheme, TC-network, guarantees the discovery of all true-deadlocks without false alarms in contrast to state-of-the-art approximation and heuristic approaches. Second, it investigates the advantages of implementing future on-chip systems using three dimensional (3D) integration and presents the design, fabrication and testing results of a TC-network implemented in a fully stacked three-layer 3D architecture using a through-silicon via (TSV) complementary metal-oxide semiconductor (CMOS) technology. Testing results demonstrate the effectiveness of such a TC-network for deadlock detection with minimal computational delay in a large-scale network. Third, it introduces an adaptive strategy to effectively diffuse heat throughout the three dimensional network-on-chip (3D-NoC) geometry. This strategy employs a dynamic programming technique to select and optimize the direction of data manoeuvre in NoC. It leads to a tool, which is based on the accurate HotSpot thermal model and SystemC cycle accurate model, to simulate the thermal system and evaluate the proposed approach. Fourth, it presents a new dynamic programming-based run-time thermal management (DPRTM) system, including reactive and proactive schemes, to effectively diffuse heat throughout NoC-based CMPs by routing packets through the coolest paths, when the temperature does not exceed chip’s thermal limit. When the thermal limit is exceeded, throttling is employed to mitigate heat in the chip and DPRTM changes its course to avoid throttled paths and to minimize the impact of throttling on chip performance. This thesis enables a new avenue to explore a novel run-time resource management infrastructure for NoCs, in which new methodologies and concepts are proposed to enhance the on-chip networks for future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)

Runtime MPI Correctness Checking with a Scalable Tools Infrastructure

Increasing computational demand of simulations motivates the use of parallel computing systems. At the same time, this parallelism poses challenges to application developers. The Message Passing Interface (MPI) is a de-facto standard for distributed memory programming in high performance computing. However, its use also enables complex parallel programing errors such as races, communication errors, and deadlocks. Automatic tools can assist application developers in the detection and removal of such errors. This thesis considers tools that detect such errors during an application run and advances them towards a combination of both precise checks (neither false positives nor false negatives) and scalability. This includes novel hierarchical checks that provide scalability, as well as a formal basis for a distributed deadlock detection approach. At the same time, the development of parallel runtime tools is challenging and time consuming, especially if scalability and portability are key design goals. Current tool development projects often create similar tool components, while component reuse remains low. To provide a perspective towards more efficient tool development, which simplifies scalable implementations, component reuse, and tool integration, this thesis proposes an abstraction for a parallel tools infrastructure along with a prototype implementation. This abstraction overcomes the use of multiple interfaces for different types of tool functionality, which limit flexible component reuse. Thus, this thesis advances runtime error detection tools and uses their redesign and their increased scalability requirements to apply and evaluate a novel tool infrastructure abstraction. The new abstraction ultimately allows developers to focus on their tool functionality, rather than on developing or integrating common tool components. The use of such an abstraction in wide ranges of parallel runtime tool development projects could greatly increase component reuse. Thus, decreasing tool development time and cost. An application study with up to 16,384 application processes demonstrates the applicability of both the proposed runtime correctness concepts and of the proposed tools infrastructure