Wavelength reconfigurability for next generation optical access networks

Next generation optical access networks should not only increase the capacity but also be able to redistribute the capacity on the fly in order to manage larger variations in traffic patterns. Wavelength reconfigurability is the instrument to enable such capability of network-wide bandwidth redistribution since it allows dynamic sharing of both wavelengths and timeslots in WDM-TDM optical access networks. However, reconfigurability typically requires tunable lasers and tunable filters at the user side, resulting in cost-prohibitive optical network units (ONU). In this dissertation, I propose a novel concept named cyclic-linked flexibility to address the cost-prohibitive problem. By using the cyclic-linked flexibility, the ONU needs to switch only within a subset of two pre-planned wavelengths, however, the cyclic-linked structure of wavelengths allows free bandwidth to be shifted to any wavelength by a rearrangement process. Rearrangement algorithm are developed to demonstrate that the cyclic-linked flexibility performs close to the fully flexible network in terms of blocking probability, packet delay, and packet loss. Furthermore, the evaluation shows that the rearrangement process has a minimum impact to in-service ONUs. To realize the cyclic-linked flexibility, a family of four physical architectures is proposed. PRO-Access architecture is suitable for new deployments and disruptive upgrades in which the network reach is not longer than 20 km. WCL-Access architecture is suitable for metro-access merger with the reach up to 100 km. PSB-Access architecture is suitable to implement directly on power-splitter-based PON deployments, which allows coexistence with current technologies. The cyclically-linked protection architecture can be used with current and future PON standards when network protection is required

Cross-layer modeling and optimization of next-generation internet networks

Scaling traditional telecommunication networks so that they are able to cope with the volume of future traffic demands and the stringent European Commission (EC) regulations on emissions would entail unaffordable investments. For this very reason, the design of an innovative ultra-high bandwidth power-efficient network architecture is nowadays a bold topic within the research community. So far, the independent evolution of network layers has resulted in isolated, and hence, far-from-optimal contributions, which have eventually led to the issues today's networks are facing such as inefficient energy strategy, limited network scalability and flexibility, reduced network manageability and increased overall network and customer services costs. Consequently, there is currently large consensus among network operators and the research community that cross-layer interaction and coordination is fundamental for the proper architectural design of next-generation Internet networks. This thesis actively contributes to the this goal by addressing the modeling, optimization and performance analysis of a set of potential technologies to be deployed in future cross-layer network architectures. By applying a transversal design approach (i.e., joint consideration of several network layers), we aim for achieving the maximization of the integration of the different network layers involved in each specific problem. To this end, Part I provides a comprehensive evaluation of optical transport networks (OTNs) based on layer 2 (L2) sub-wavelength switching (SWS) technologies, also taking into consideration the impact of physical layer impairments (PLIs) (L0 phenomena). Indeed, the recent and relevant advances in optical technologies have dramatically increased the impact that PLIs have on the optical signal quality, particularly in the context of SWS networks. Then, in Part II of the thesis, we present a set of case studies where it is shown that the application of operations research (OR) methodologies in the desing/planning stage of future cross-layer Internet network architectures leads to the successful joint optimization of key network performance indicators (KPIs) such as cost (i.e., CAPEX/OPEX), resources usage and energy consumption. OR can definitely play an important role by allowing network designers/architects to obtain good near-optimal solutions to real-sized problems within practical running times

Mecanismos de tuning em redes de acesso óticas

Mestrado em Engenharia Electrónica e TelecomunicaçõesO principal tema abordado neste trabalho e a tecnologia a ser utilizada em redes passivas oticas de nova gera c~ao, nomeadamente o TWDM e o PtP WDM, com um foco em especial nos mecanismos de tunabilidade a ser usados nas arquiteturas de rede mencionadas. Come cou por ser feita uma abordagem geral ao tema, um "overview" a recomenda c~ao para o NG-PON2 e apresentada, assim como uma revis~ao a transceivers incolores, componentes essenciais nas arquitecturas do NG-PON2. Tendo em conta o n vel de precis~ao apresentada, tr^es tipos de ONUs s~ao de nidas nos standards do NG-PON2, e os mecanismos de tuning necess arios para lidar com os diferentes tipos de ONU s~ao tamb em apresentados. Foi caracterizado um laser sintoniz avel (DFB) tendo em vista a sua utiliza c~ao numa ONU do NG-PON2, os parametros avaliados foram: tempo de sintoniza c~ao, excurs~ao espectral e precis~ao de tuning. As t ecnicas de medi c~ao s~ao apresentadas bem como os resultados obtidos.The main issue addressed in this work are the technologies to be employed in the next-generation passive optical networks, including TWDM-PON and PtP WDM, with a particularly focus on the tuning mechanisms featuring the aforementioned network architectures. A general approach to the topics was carried out, by making an overview the NG-PON2 recommendation, a review to colorless transceivers is presented as well, essential components on the NG-PON2 architectures. Three types of ONUs are de ned in NGPON2 standards, by taking into account the accuracy level of the ONU Tx, tuning mechanisms necessary to to deal with the di erent kind of ONUs are presented as well A tunable DFB laser was characterized, considering its utilization on a NGPON2 ONU. The evaluated parameters are: tuning time, spectral excursion and tuning accuracy. The setups utilized for the measurements are presented as well as the results

Dynamically reconfigurable long-reach PONs for high capacity access

Fibre-to-the-Premises (FTTP) is currently seen as the ultimate in high-speed transmission technologies for delivering ubiquitous bandwidth to customers. However, as the deployment of network infrastructure requires a substantial investment, the main obstacle to fibre deployment is that of financial viability. With this in mind, a logical strategy to offset network costs is to optimise the infrastructure in order to capture a greater amount of customers over larger areas with increased sharing of network resources. This approach prompted the design of a long-reach passive optical network (LR-PON) in which the physical reach and split of a conventional PON is significantly increased through the use of intermediate optical amplification. In particular, the LR-PON architecture effectively integrates the metro and access networks enabling the majority of local exchange sites to be bypassed resulting in a substantial reduction in field equipment requirements and power consumption. Furthermore, the extension in physical reach and split can be coupled with an increased information capacity through the use of time- and wavelength division multiplexing (TWDM) which serve to exploit the large bandwidth capabilities offered by single-mode fibre. In this project, reconfigurable TWDM LR-PON architectures which dynamically exploit the wavelength domain are proposed, assembled and characterised in order to establish an economically viable ‘open access’ environment that is capable of concurrently supporting multiple operators offering converged services (residential, business and mobile) to support diverse customer requirements and locations. The main investigations in this work address the key physical layer challenges within such wavelength-agile networks. In particular, a range of experimental analysis has been carried out in order to realise the critical component technologies which include low-cost, 10G-capable, wavelength-tuneable transmitters for mass-market residential deployment and the development of gain-stabilised optical amplifier nodes to support the targeted physical reach (≥ 100km) and split (≥ 512). Finally, the feasibility of the proposed dynamically reconfigurable LR-PON configurations as a flexible and cost-effective solution for future access networks is verified through full-scale network demonstrations using an experimental laboratory test-bed

Contributions to energy-aware demand-response systems using SDN and NFV for fog computing

Ever-increasing energy consumption, the depletion of non-renewable resources, the climate impact associated with energy generation, and finite energy-production capacity are important concerns worldwide that drive the urgent creation of new energy management and consumption schemes. In this regard, by leveraging the massive connectivity provided by emerging communications such as the 5G systems, this thesis proposes a long-term sustainable Demand-Response solution for the adaptive and efficient management of available energy consumption for Internet of Things (IoT) infrastructures, in which energy utilization is optimized based on the available supply. In the proposed approach, energy management focuses on consumer devices (e.g., appliances such as a light bulb or a screen). In this regard, by proposing that each consumer device be part of an IoT infrastructure, it is feasible to control its respective consumption. The proposal includes an architecture that uses Network Functions Virtualization (NFV) and Software Defined Networking technologies as enablers to promote the primary use of energy from renewable sources. Associated with architecture, this thesis presents a novel consumption model conditioned on availability in which consumers are part of the management process. To efficiently use the energy from renewable and non-renewable sources, several management strategies are herein proposed, such as the prioritization of the energy supply, workload scheduling using time-shifting capabilities, and quality degradation to decrease- the power demanded by consumers if needed. The adaptive energy management solution is modeled as an Integer Linear Programming, and its complexity has been identified to be NP-Hard. To verify the improvements in energy utilization, an optimal algorithmic solution based on a brute force search has been implemented and evaluated. Because the hardness of the adaptive energy management problem and the non-polynomial growth of its optimal solution, which is limited to energy management for a small number of energy demands (e.g., 10 energy demands) and small values of management mechanisms, several faster suboptimal algorithmic strategies have been proposed and implemented. In this context, at the first stage, we implemented three heuristic strategies: a greedy strategy (GreedyTs), a genetic-algorithm-based solution (GATs), and a dynamic programming approach (DPTs). Then, we incorporated into both the optimal and heuristic strategies a prepartitioning method in which the total set of analyzed services is divided into subsets of smaller size and complexity that are solved iteratively. As a result of the adaptive energy management in this thesis, we present eight strategies, one timal and seven heuristic, that when deployed in communications infrastructures such as the NFV domain, seek the best possible scheduling of demands, which lead to efficient energy utilization. The performance of the algorithmic strategies has been validated through extensive simulations in several scenarios, demonstrating improvements in energy consumption and the processing of energy demands. Additionally, the simulation results revealed that the heuristic approaches produce high-quality solutions close to the optimal while executing among two and seven orders of magnitude faster and with applicability to scenarios with thousands and hundreds of thousands of energy demands. This thesis also explores possible application scenarios of both the proposed architecture for adaptive energy management and algorithmic strategies. In this regard, we present some examples, including adaptive energy management in-home systems and 5G networks slicing, energy-aware management solutions for unmanned aerial vehicles, also known as drones, and applicability for the efficient allocation of spectrum in flex-grid optical networks. Finally, this thesis presents open research problems and discusses other application scenarios and future work.El constante aumento del consumo de energía, el agotamiento de los recursos no renovables, el impacto climático asociado con la generación de energía y la capacidad finita de producción de energía son preocupaciones importantes en todo el mundo que impulsan la creación urgente de nuevos esquemas de consumo y gestión de energía. Al aprovechar la conectividad masiva que brindan las comunicaciones emergentes como los sistemas 5G, esta tesis propone una solución de Respuesta a la Demanda sostenible a largo plazo para la gestión adaptativa y eficiente del consumo de energía disponible para las infraestructuras de Internet of Things (IoT), en el que se optimiza la utilización de la energía en función del suministro disponible. En el enfoque propuesto, la gestión de la energía se centra en los dispositivos de consumo (por ejemplo, electrodomésticos). En este sentido, al proponer que cada dispositivo de consumo sea parte de una infraestructura IoT, es factible controlar su respectivo consumo. La propuesta incluye una arquitectura que utiliza tecnologías de Network Functions Virtualization (NFV) y Software Defined Networking como habilitadores para promover el uso principal de energía de fuentes renovables. Asociada a la arquitectura, esta tesis presenta un modelo de consumo condicionado a la disponibilidad en el que los consumidores son parte del proceso de gestión. Para utilizar eficientemente la energía de fuentes renovables y no renovables, se proponen varias estrategias de gestión, como la priorización del suministro de energía, la programación de la carga de trabajo utilizando capacidades de cambio de tiempo y la degradación de la calidad para disminuir la potencia demandada. La solución de gestión de energía adaptativa se modela como un problema de programación lineal entera con complejidad NP-Hard. Para verificar las mejoras en la utilización de energía, se ha implementado y evaluado una solución algorítmica óptima basada en una búsqueda de fuerza bruta. Debido a la dureza del problema de gestión de energía adaptativa y el crecimiento no polinomial de su solución óptima, que se limita a la gestión de energía para un pequeño número de demandas de energía (por ejemplo, 10 demandas) y pequeños valores de los mecanismos de gestión, varias estrategias algorítmicas subóptimos más rápidos se han propuesto. En este contexto, en la primera etapa, implementamos tres estrategias heurísticas: una estrategia codiciosa (GreedyTs), una solución basada en algoritmos genéticos (GATs) y un enfoque de programación dinámica (DPTs). Luego, incorporamos tanto en la estrategia óptima como en la- heurística un método de prepartición en el que el conjunto total de servicios analizados se divide en subconjuntos de menor tamaño y complejidad que se resuelven iterativamente. Como resultado de la gestión adaptativa de la energía en esta tesis, presentamos ocho estrategias, una óptima y siete heurísticas, que cuando se despliegan en infraestructuras de comunicaciones como el dominio NFV, buscan la mejor programación posible de las demandas, que conduzcan a un uso eficiente de la energía. El desempeño de las estrategias algorítmicas ha sido validado a través de extensas simulaciones en varios escenarios, demostrando mejoras en el consumo de energía y el procesamiento de las demandas de energía. Los resultados de la simulación revelaron que los enfoques heurísticos producen soluciones de alta calidad cercanas a las óptimas mientras se ejecutan entre dos y siete órdenes de magnitud más rápido y con aplicabilidad a escenarios con miles y cientos de miles de demandas de energía. Esta tesis también explora posibles escenarios de aplicación tanto de la arquitectura propuesta para la gestión adaptativa de la energía como de las estrategias algorítmicas. En este sentido, presentamos algunos ejemplos, que incluyen sistemas de gestión de energía adaptativa en el hogar, en 5G networkPostprint (published version