Improving next-generation wireless network performance and reliability with deep learning

A rudimentary question whether machine learning in general, or deep learning in particular, could add to the well-established field of wireless communications, which has been evolving for close to a century, is often raised. While the use of deep learning based methods is likely to help build intelligent wireless solutions, this use becomes particularly challenging for the lower layers in the wireless communication stack. The introduction of the fifth generation of wireless communications (5G) has triggered the demand for “network intelligence” to support its promises for very high data rates and extremely low latency. Consequently, 5G wireless operators are faced with the challenges of network complexity, diversification of services, and personalized user experience. Industry standards have created enablers (such as the network data analytics function), but these enablers focus on post-mortem analysis at higher stack layers and have a periodicity in the time scale of seconds (or larger). The goal of this dissertation is to show a solution for these challenges and how a data-driven approach using deep learning could add to the field of wireless communications. In particular, I propose intelligent predictive and prescriptive abilities to boost reliability and eliminate performance bottlenecks in 5G cellular networks and beyond, show contributions that justify the value of deep learning in wireless communications across several different layers, and offer in-depth analysis and comparisons with baselines and industry standards. First, to improve multi-antenna network reliability against wireless impairments with power control and interference coordination for both packetized voice and beamformed data bearers, I propose the use of a joint beamforming, power control, and interference coordination algorithm based on deep reinforcement learning. This algorithm uses a string of bits and logic operations to enable simultaneous actions to be performed by the reinforcement learning agent. Consequently, a joint reward function is also proposed. I compare the performance of my proposed algorithm with the brute force approach and show that similar performance is achievable but with faster run-time as the number of transmit antennas increases. Second, in enhancing the performance of coordinated multipoint, I propose the use of deep learning binary classification to learn a surrogate function to trigger a second transmission stream instead of depending on the popular signal to interference plus noise measurement quantity. This surrogate function improves the users' sum-rate through focusing on pre-logarithmic terms in the sum-rate formula, which have larger impact on this rate. Third, performance of band switching can be improved without the need for a full channel estimation. My proposal of using deep learning to classify the quality of two frequency bands prior to granting the band switching leads to a significant improvement in users' throughput. This is due to the elimination of the industry standard measurement gap requirement—a period of silence where no data is sent to the users so they could measure the frequency bands before switching. In this dissertation, a group of algorithms for wireless network performance and reliability for downlink are proposed. My results show that the introduction of user coordinates enhance the accuracy of the predictions made with deep learning. Also, the choice of signal to interference plus noise ratio as the optimization objective may not always be the best choice to improve user throughput rates. Further, exploiting the spatial correlation of channels in different frequency bands can improve certain network procedures without the need for perfect knowledge of the per-band channel state information. Hence, an understanding of these results help develop novel solutions to enhancing these wireless networks at a much smaller time scale compared to the industry standards todayElectrical and Computer Engineerin

Joint Design of Access and Backhaul in Densely Deployed MmWave Small Cells

With the rapid growth of mobile data traffic, the shortage of radio spectrum resource has become increasingly prominent. Millimeter wave (mmWave) small cells can be densely deployed in macro cells to improve network capacity and spectrum utilization. Such a network architecture is referred to as mmWave heterogeneous cellular networks (HetNets). Compared with the traditional wired backhaul, The integrated access and backhaul (IAB) architecture with wireless backhaul is more flexible and cost-effective for mmWave HetNets. However, the imbalance of throughput between the access and backhaul links will constrain the total system throughput. Consequently, it is necessary to jointly design of radio access and backhaul link. In this paper, we study the joint optimization of user association and backhaul resource allocation in mmWave HetNets, where different mmWave bands are adopted by the access and backhaul links. Considering the non-convex and combinatorial characteristics of the optimization problem and the dynamic nature of the mmWave link, we propose a multi-agent deep reinforcement learning (MADRL) based scheme to maximize the long-term total link throughput of the network. The simulation results show that the scheme can not only adjust user association and backhaul resource allocation strategy according to the dynamics in the access link state, but also effectively improve the link throughput under different system configurations.Comment: 15 page

D4.2 Intelligent D-Band wireless systems and networks initial designs

This deliverable gives the results of the ARIADNE project's Task 4.2: Machine Learning based network intelligence. It presents the work conducted on various aspects of network management to deliver system level, qualitative solutions that leverage diverse machine learning techniques. The different chapters present system level, simulation and algorithmic models based on multi-agent reinforcement learning, deep reinforcement learning, learning automata for complex event forecasting, system level model for proactive handovers and resource allocation, model-driven deep learning-based channel estimation and feedbacks as well as strategies for deployment of machine learning based solutions. In short, the D4.2 provides results on promising AI and ML based methods along with their limitations and potentials that have been investigated in the ARIADNE project

Performance Analysis and Learning Algorithms in Advanced Wireless Networks

Over the past decade, wireless data traffic has experienced an exponential growth, especially with multimedia traffic becoming the dominant traffic, and such growth is expected to continue in the near future. This unprecedented growth has led to an increasing demand for high-rate wireless communications.Key solutions for addressing such demand include extreme network densification with more small-cells, the utilization of high frequency bands, such as the millimeter wave (mmWave) bands and terahertz (THz) bands, where more bandwidth is available, and unmanned aerial vehicle (UAV)-enabled cellular networks. With this motivation, different types of advanced wireless networks are considered in this thesis. In particular, mmWave cellular networks, networks with hybrid THz, mmWave and microwave transmissions, and UAV-enabled networks are studied, and performance metrics such as the signal-to-interference-plus-noise ratio (SINR) coverage, energy coverage, and area spectral efficiency are analyzed. In addition, UAV path planning in cellular networks are investigated, and deep reinforcement learning (DRL) based algorithms are proposed to find collision-free UAV trajectory to accomplish different missions. In the first part of this thesis, mmWave cellular networks are considered. First, K-tier heterogeneous mmWave cellular networks with user-centric small-cell deployments are studied. Particularly, a heterogeneous network model with user equipments (UEs) being distributed according to Poisson cluster processes (PCPs) is considered. Distinguishing features of mmWave communications including directional beamforming and a detailed path loss model are taken into account. General expressions for the association probabilities of different tier base stations (BSs) are determined. Using tools from stochastic geometry, the Laplace transform of the interference is characterized and general expressions for the SINR coverage probability and area spectral efficiency are derived. Second, a distributed multi-agent learning-based algorithm for beamforming in mmWave multiple input multiple output (MIMO) networks is proposed to maximize the sum-rate of all UEs. Following the analysis of mmWave cellular networks, a three-tier heterogeneous network is considered, where access points (APs), small-cell BSs (SBSs) and macrocell BSs (MBSs) transmit in THz, mmWave, microwave frequency bands, respectively. By using tools from stochastic geometry, the complementary cumulative distribution function (CCDF) of the received signal power, the Laplace transform of the aggregate interference, and the SINR coverage probability are determined. Next, system-level performance of UAV-enabled cellular networks is studied. More specifically, in the first part, UAV-assisted mmWave cellular networks are addressed, in which the UE locations are modeled using PCPs. In the downlink phase, simultaneous wireless information and power transfer (SWIPT) technique is considered. The association probability, energy coverages and a successful transmission probability to jointly determine the energy and SINR coverages are derived. In the uplink phase, a scenario that each UAV receives information from its own cluster member UEs is taken into account. The Laplace transform of the interference components and the uplink SINR coverage are characterized. In the second part, cellular-connected UAV networks is investigated, in which the UAVs are aerial UEs served by the ground base stations (GBSs). 3D antenna radiation combing the vertical and horizontal patterns is taken into account. In the final part of this thesis, deep reinforcement learning based algorithms are proposed for UAV path planning in cellular networks. Particularly, in the first part, multi-UAV non-cooperative scenarios is considered, where multiple UAVs need to fly from initial locations to destinations, while satisfying collision avoidance, wireless connectivity and kinematic constraints. The goal is to find trajectories for the cellular-connected UAVs to minimize their mission completion time. The multi-UAV trajectory optimization problem is formulated as a sequential decision making problem, and a decentralized DRL approach is proposed to solve the problem. Moreover, multiple UAV trajectory design in cellular networks with a dynamic jammer is studied, and a learning-based algorithm is proposed. Subsequently, a UAV trajectory optimization problem is considered to maximize the collected data from multiple Internet of things (IoT) nodes under realistic constraints. The problem is translated into a Markov decision process (MDP) and dueling double deep Q-network (D3QN) is proposed to learn the decision making policy