Comprehensive review on controller for leader-follower robotic system

985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies

Fault tolerant control design of floating offshore wind turbines

This work is concerned with active vibration mitigation in wind turbines (WT) but not through the use of specifically tailored devices. Instead, a general control scheme is designed for torque and pitch controllers based on a super-twisting algorithm, which uses additional feedback of the fore-aft and side-to-side acceleration signals at the top of the WT tower to mitigate the vibrational behavior. In general, proposed methods to improve damping through pitch and torque control suffer from increased blade pitch actuator usage. However, in this work the blade pitch angle is smoothed leading to a decrease of the pitch actuator effort, among other benefits evidenced through numerical experiments. The most frequent faults induce vibrations in the corresponding WT subsystems. In fact, vibration monitoring has been recently used for fault diagnosis Thus, by means of vibration mitigation, different faulty conditions can be alleviated leading to a passive fault tolerant control. In this work, coupled non-linear aero-hydro- servo-elastic simulations of a floating offshore wind turbine are carried out for one of the most common pitch actuator faults.Postprint (published version

Concurrent Learning-Based Neuro-Adaptive Robust Tracking Control of Wheeled Mobile Robot: An Event-Triggered Design

In this paper, an event-based neuro-adaptive robust tracking controller for a perturbed and networked differential drive mobile robot (DMR) is designed with concurrent learning. A radial basis function neural network, which approximates an unknown perturbation, is used to design an adaptive sliding mode controller (SMC). The RBFNN weights and SMC parameters are estimated online using an adaptive tuning law to ensure performance with reduced chattering. To improve the convergence of RBFNN weight estimation error, a concurrent learning-based adaptive law is derived, which uses measured online and recorded data. Further, a suitable triggering condition is designed to achieve a reduced number of control computations while minimizing network resources without sacrificing the stability of the sampled data closed-loop control system. A finite sampling frequency is guaranteed for the designed triggering condition by establishing a positive lower bound on the inter-event execution time which is equivalent to the Zeno-free behavior of the system. Finally, the proposed event-based neuro-adaptive robust controller is implemented on a practical system (Q-bot 2e) to show the effectiveness of the proposed design

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance

A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Control of Flexible Manipulator Robots Based on Dynamic Confined Space of Velocities: Dynamic Programming Approach

Linear Parameter Varying models-based Model Predictive Control (LPV-MPC) has stood out in manipulator robots because it presents well-rejection to dynamic uncertainties in flexible joints. However, it has become too weak when the MPC's optimization problem does not include kinematic constraints-based conditions. This paper uses dynamic confined space of velocities (DCSV) to include these conditions as a recursive polytopic constraint, guaranteeing optimal dependency on a simplex scheduling parameter. To this end, the local frame's velocities and torque/force preload of joints (related to violation of kinematic constraints) are associated with different time scale dynamics such that DCSV correlates them as a polytope. So, a classical LPV-MPC will be updated using a dynamic programming approach according to the DCSV-based polytope. As a result, one lemma about DCSV-based recursive polytope and a five-step procedure for two decoupled close-loop schemes with different time scales compose the LPV-MPC proposed method. Numerical validation shows that even for relevant flexibility situations, trajectory tracking performance is improved by tuning finite horizons and optimization problem constraints regarding DCSV's behavior

Acceleration-based fault-tolerant control design of offshore fixed wind turbines

Wind turbines (WTs) are basically controlled by varying the generator load torque (with the so-called torque control) and the blade pitch angles (with the so-called pitch control) based on measurement of the generator shaft speed. These two controllers unitedly work to satisfy the control objectives, and it is crucial that they are tolerant to possible faults in the WT system. Passive fault-tolerant control comprises the design of robust controllers against disturbances and uncertainties. This enables the controller to counteract the effect of a fault without requiring reconfiguration or fault detection. In this regard, the main contribution of this paper is to propose new control techniques that not only provide fault tolerance capabilities to the WT system but also improve the overall performance of the system in both fault-free and faulty conditions. Coupling nonlinear aero-hydro-servo-elastic simulations of an offshore WT with jacket platform is carried out for several pitch actuator faults. The jacket platform motions and structural loads caused by fault events with the proposed controllers are compared with loads encountered during normal operation and with respect to a well-known baseline controller in the literature. The proposed controllers are based in the super-twisting algorithm by using feedback of the generator shaft speed as well as the fore-aft and side-to-side acceleration signals of the WT tower.Preprin

Sliding Mode Control

The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area