Switching control systems and their design automation via genetic algorithms

The objective of this work is to provide a simple and effective nonlinear controller. Our strategy involves switching the underlying strategies in order to maintain a robust control. If a disturbance moves the system outside the region of stability or the domain of attraction, it will be guided back onto the desired course by the application of a different control strategy. In the context of switching control, the common types of controller present in the literature are based either on fuzzy logic or sliding mode. Both of them are easy to implement and provide efficient control for non-linear systems, their actions being based on the observed input/output behaviour of the system. In the field of fuzzy logic control (FLC) using error feedback variables there are two main problems. The first is the poor transient response (jerking) encountered by the conventional 2-dimensional rule-base fuzzy PI controller. Secondly, conventional 3-D rule-base fuzzy PID control design is both computationally intensive and suffers from prolonged design times caused by a large dimensional rule-base. The size of the rule base will increase exponentially with the increase of the number of fuzzy sets used for each input decision variable. Hence, a reduced rule-base is needed for the 3-term fuzzy controller. In this thesis a direct implementation method is developed that allows the size of the rule-base to be reduced exponentially without losing the features of the PID structure. This direct implementation method, when applied to the reduced rule-base fuzzy PI controller, gives a good transient response with no jerking

Precision Control of a Sensorless Brushless Direct Current Motor System

Sensorless control strategies were first suggested well over a decade ago with the aim of reducing the size, weight and unit cost of electrically actuated servo systems. The resulting algorithms have been successfully applied to the induction and synchronous motor families in applications where control of armature speeds above approximately one hundred revolutions per minute is desired. However, sensorless position control remains problematic. This thesis provides an in depth investigation into sensorless motor control strategies for high precision motion control applications. Specifically, methods of achieving control of position and very low speed thresholds are investigated. The developed grey box identification techniques are shown to perform better than their traditional white or black box counterparts. Further, fuzzy model based sliding mode control is implemented and results demonstrate its improved robustness to certain classes of disturbance. Attempts to reject uncertainty within the developed models using the sliding mode are discussed. Novel controllers, which enhance the performance of the sliding mode are presented. Finally, algorithms that achieve control without a primary feedback sensor are successfully demonstrated. Sensorless position control is achieved with resolutions equivalent to those of existing stepper motor technology. The successful control of armature speeds below sixty revolutions per minute is achieved and problems typically associated with motor starting are circumvented.Research Instruments Ltd

Study of numeric Saturation Effects in Linear Digital Compensators

Saturation arithmetic is often used in finite precision digital compensators to circumvent instability due to radix overflow. The saturation limits in the digital structure lead to nonlinear behavior during large state transients. It is shown that if all recursive loops in a compensator are interrupted by at least one saturation limit, then there exists a bounded external scaling rule which assures against overflow at all nodes in the structure. Design methods are proposed based on the generalized second method of Lyapunov, which take the internal saturation limits into account to implement a robust dual-mode suboptimal control for bounded input plants. The saturating digital compensator provides linear regulation for small disturbances, and near-time-optimal control for large disturbances or changes in the operating point. Computer aided design tools are developed to facilitate the analysis and design of this class of digital compensators

Robust de-centralized control and estimation for inter-connected systems

The thesis is concerned with the theoretical development of the control of inter-connected systems to achieve the whole overall stability and specific performance. A special included feature is the Fault-Tolerant Control (FTC) problem for the inter-connected system in terms of local subsystem actuator fault estimation. Hence, the thesis describes the main FTC challenges of distributed control of uncertain non-linear inter-connected systems. The basic principle adopted throughout the work is that the controller has two components, one involving the nominal control with unmatched components including uncertainties and disturbances. The second controller dealing with matched components including uncertainties and actuator faults.The main contributions of the thesis are summarised as follows:- The non-linear inter-connected systems are controlled by two controllers. The linear part via a linear matrix inequality (LMI) technique and the discontinuous part by using Integral Sliding Mode Control (ISMC) based on state feedback control.- The development of a new observer-based state estimate control strategy for non-linear inter-connected systems. The technique is applied either to every individual subsystem or to the whole as one shot system.- A new proposal of Adaptive Output Integral Sliding Mode Control (AOISMC) based only on output information plus static output feedback control is designed via an LMI formulation to control non-linear inter-connected systems. The new method is verified by application to a mathematical example representing an electrical power generator.- The development of a new method to design a dynamic control based on an LMI framework with Output Integral Sliding Mode Control (OISMC) to improve the stability and performance.- Using the above framework, making use of LMI tools and ISMC, a method of on-line actuator fault estimation has been proposed using the Proportional Multiple Integral Observer (PMIO) for fault estimation applicable to non-linear inter-connected systems

Robust de-centralized control and estimation for inter-connected systems

The thesis is concerned with the theoretical development of the control of inter-connected systems to achieve the whole overall stability and specific performance. A special included feature is the Fault-Tolerant Control (FTC) problem for the inter-connected system in terms of local subsystem actuator fault estimation. Hence, the thesis describes the main FTC challenges of distributed control of uncertain non-linear inter-connected systems. The basic principle adopted throughout the work is that the controller has two components, one involving the nominal control with unmatched components including uncertainties and disturbances. The second controller dealing with matched components including uncertainties and actuator faults. The main contributions of the thesis are summarised as follows: - The non-linear inter-connected systems are controlled by two controllers. The linear part via a linear matrix inequality (LMI) technique and the discontinuous part by using Integral Sliding Mode Control (ISMC) based on state feedback control. - The development of a new observer-based state estimate control strategy for non-linear inter-connected systems. The technique is applied either to every individual subsystem or to the whole as one shot system. - A new proposal of Adaptive Output Integral Sliding Mode Control (AOISMC) based only on output information plus static output feedback control is designed via an LMI formulation to control non-linear inter-connected systems. The new method is verified by application to a mathematical example representing an electrical power generator. - The development of a new method to design a dynamic control based on an LMI framework with Output Integral Sliding Mode Control (OISMC) to improve the stability and performance. - Using the above framework, making use of LMI tools and ISMC, a method of on-line actuator fault estimation has been proposed using the Proportional Multiple Integral Observer (PMIO) for fault estimation applicable to non-linear inter-connected systems

Development of Robust Control Strategies for Autonomous Underwater Vehicles

The resources of the energy and chemical balance in the ocean sustain mankind in many ways. Therefore, ocean exploration is an essential task that is accomplished by deploying Underwater Vehicles. An Underwater Vehicle with autonomy feature for its navigation and control is called Autonomous Underwater Vehicle (AUV). Among the task handled by an AUV, accurately positioning itself at a desired position with respect to the reference objects is called set-point control. Similarly, tracking of the reference trajectory is also another important task. Battery recharging of AUV, positioning with respect to underwater structure, cable, seabed, tracking of reference trajectory with desired accuracy and speed to avoid collision with the guiding vehicle in the last phase of docking are some significant applications where an AUV needs to perform the above tasks. Parametric uncertainties in AUV dynamics and actuator torque limitation necessitate to design robust control algorithms to achieve motion control objectives in the face of uncertainties. Sliding Mode Controller (SMC), H / μ synthesis, model based PID group controllers are some of the robust controllers which have been applied to AUV. But SMC suffers from less efficient tuning of its switching gains due to model parameters and noisy estimated acceleration states appearing in its control law. In addition, demand of high control effort due to high frequency chattering is another drawback of SMC. Furthermore, real-time implementation of H / μ synthesis controller based on its stability study is restricted due to use of linearly approximated dynamic model of an AUV, which hinders achieving robustness. Moreover, model based PID group controllers suffer from implementation complexities and exhibit poor transient and steady-state performances under parametric uncertainties. On the other hand model free Linear PID (LPID) has inherent problem of narrow convergence region, i.e.it can not ensure convergence of large initial error to zero. Additionally, it suffers from integrator-wind-up and subsequent saturation of actuator during the occurrence of large initial error. But LPID controller has inherent capability to cope up with the uncertainties. In view of addressing the above said problem, this work proposes wind-up free Nonlinear PID with Bounded Integral (BI) and Bounded Derivative (BD) for set-point control and combination of continuous SMC with Nonlinear PID with BI and BD namely SM-N-PID with BI and BD for trajectory tracking. Nonlinear functions are used for all P,I and D controllers (for both of set-point and tracking control) in addition to use of nonlinear tan hyperbolic function in SMC(for tracking only) such that torque demand from the controller can be kept within a limit. A direct Lyapunov analysis is pursued to prove stable motion of AUV. The efficacies of the proposed controllers are compared with other two controllers namely PD and N-PID without BI and BD for set-point control and PD plus Feedforward Compensation (FC) and SM-NPID without BI and BD for tracking control. Multiple AUVs cooperatively performing a mission offers several advantages over a single AUV in a non-cooperative manner; such as reliability and increased work efficiency, etc. Bandwidth limitation in acoustic medium possess challenges in designing cooperative motion control algorithm for multiple AUVs owing to the necessity of communication of sensors and actuator signals among AUVs. In literature, undirected graph based approach is used for control design under communication constraints and thus it is not suitable for large number of AUVs participating in a cooperative motion plan. Formation control is a popular cooperative motion control paradigm. This thesis models the formation as a minimally persistent directed graph and proposes control schemes for maintaining the distance constraints during the course of motion of entire formation. For formation control each AUV uses Sliding Mode Nonlinear PID controller with Bounded Integrator and Bounded Derivative. Direct Lyapunov stability analysis in the framework of input-to-state stability ensures the stable motion of formation while maintaining the desired distance constraints among the AUVs