Transformations of High-Level Synthesis Codes for High-Performance Computing

Specialized hardware architectures promise a major step in performance and energy efficiency over the traditional load/store devices currently employed in large scale computing systems. The adoption of high-level synthesis (HLS) from languages such as C/C++ and OpenCL has greatly increased programmer productivity when designing for such platforms. While this has enabled a wider audience to target specialized hardware, the optimization principles known from traditional software design are no longer sufficient to implement high-performance codes. Fast and efficient codes for reconfigurable platforms are thus still challenging to design. To alleviate this, we present a set of optimizing transformations for HLS, targeting scalable and efficient architectures for high-performance computing (HPC) applications. Our work provides a toolbox for developers, where we systematically identify classes of transformations, the characteristics of their effect on the HLS code and the resulting hardware (e.g., increases data reuse or resource consumption), and the objectives that each transformation can target (e.g., resolve interface contention, or increase parallelism). We show how these can be used to efficiently exploit pipelining, on-chip distributed fast memory, and on-chip streaming dataflow, allowing for massively parallel architectures. To quantify the effect of our transformations, we use them to optimize a set of throughput-oriented FPGA kernels, demonstrating that our enhancements are sufficient to scale up parallelism within the hardware constraints. With the transformations covered, we hope to establish a common framework for performance engineers, compiler developers, and hardware developers, to tap into the performance potential offered by specialized hardware architectures using HLS

Optimizing Transformer Inference on FPGA: A Study on Hardware Acceleration using Vitis HLS

In the last decade, advancements in Natural Language Processing have been exemplary, it has reshaped human-computer interaction, spruced up mainly by the transformative power of deep learning models like the Transformer architecture. With its revolutionary self-attention mechanism, the Transformer has outperformed & outmanoeuvred traditional architectures, enhancing tasks varying from machine translation to sentiment analysis. However, the computational demands of these models challenge their integration onto devices with limited resources. This thesis strives to propose an FPGA-based hardware accelerator tailor made for the Transformer's encoder block, implemented using the Vitis High-Level Synthesis (HLS) framework. In this work, we systematically analyze the Transformer to pinpoint computational bottlenecks with alacrity. Through the Vitis HLS framework, the accelerator emphasizes parallelism, resource efficiency, and optimized memory access. Significantly, this approach employs HLS optimization to boost performance to stellar levels. A key contribution is the seamless integration of this accelerator with the Xilinx ecosystem, enriching its deployment on FPGA devices. We subject the proposed accelerator to rigorous & intensive testing, benchmarking its performance, optimum resource utilization, and energy efficiency. The results underscore the accelerator's potential in bridging the computational gap in resource-limited settings, establishing a benchmark for future NLP hardware acceleration endeavors

High-Level Synthesis Based VLSI Architectures for Video Coding

High Efficiency Video Coding (HEVC) is state-of-the-art video coding standard. Emerging applications like free-viewpoint video, 360degree video, augmented reality, 3D movies etc. require standardized extensions of HEVC. The standardized extensions of HEVC include HEVC Scalable Video Coding (SHVC), HEVC Multiview Video Coding (MV-HEVC), MV-HEVC+ Depth (3D-HEVC) and HEVC Screen Content Coding. 3D-HEVC is used for applications like view synthesis generation, free-viewpoint video. Coding and transmission of depth maps in 3D-HEVC is used for the virtual view synthesis by the algorithms like Depth Image Based Rendering (DIBR). As first step, we performed the profiling of the 3D-HEVC standard. Computational intensive parts of the standard are identified for the efficient hardware implementation. One of the computational intensive part of the 3D-HEVC, HEVC and H.264/AVC is the Interpolation Filtering used for Fractional Motion Estimation (FME). The hardware implementation of the interpolation filtering is carried out using High-Level Synthesis (HLS) tools. Xilinx Vivado Design Suite is used for the HLS implementation of the interpolation filters of HEVC and H.264/AVC. The complexity of the digital systems is greatly increased. High-Level Synthesis is the methodology which offers great benefits such as late architectural or functional changes without time consuming in rewriting of RTL-code, algorithms can be tested and evaluated early in the design cycle and development of accurate models against which the final hardware can be verified

Running stream-like programs on heterogeneous multi-core systems

All major semiconductor companies are now shipping multi-cores. Phones, PCs, laptops, and mobile internet devices will all require software that can make effective use of these cores. Writing high-performance parallel software is difficult, time-consuming and error prone, increasing both time-to-market and cost. Software outlives hardware; it typically takes longer to develop new software than hardware, and legacy software tends to survive for a long time, during which the number of cores per system will increase. Development and maintenance productivity will be improved if parallelism and technical details are managed by the machine, while the programmer reasons about the application as a whole. Parallel software should be written using domain-specific high-level languages or extensions. These languages reveal implicit parallelism, which would be obscured by a sequential language such as C. When memory allocation and program control are managed by the compiler, the program's structure and data layout can be safely and reliably modified by high-level compiler transformations. One important application domain contains so-called stream programs, which are structured as independent kernels interacting only through one-way channels, called streams. Stream programming is not applicable to all programs, but it arises naturally in audio and video encode and decode, 3D graphics, and digital signal processing. This representation enables high-level transformations, including kernel unrolling and kernel fusion. This thesis develops new compiler and run-time techniques for stream programming. The first part of the thesis is concerned with a statically scheduled stream compiler. It introduces a new static partitioning algorithm, which determines which kernels should be fused, in order to balance the loads on the processors and interconnects. A good partitioning algorithm is crucial if the compiler is to produce efficient code. The algorithm also takes account of downstream compiler passes---specifically software pipelining and buffer allocation---and it models the compiler's ability to fuse kernels. The latter is important because the compiler may not be able to fuse arbitrary collections of kernels. This thesis also introduces a static queue sizing algorithm. This algorithm is important when memory is distributed, especially when local stores are small. The algorithm takes account of latencies and variations in computation time, and is constrained by the sizes of the local memories. The second part of this thesis is concerned with dynamic scheduling of stream programs. First, it investigates the performance of known online, non-preemptive, non-clairvoyant dynamic schedulers. Second, it proposes two dynamic schedulers for stream programs. The first is specifically for one-dimensional stream programs. The second is more general: it does not need to be told the stream graph, but it has slightly larger overhead. This thesis also introduces some support tools related to stream programming. StarssCheck is a debugging tool, based on Valgrind, for the StarSs task-parallel programming language. It generates a warning whenever the program's behaviour contradicts a pragma annotation. Such behaviour could otherwise lead to exceptions or race conditions. StreamIt to OmpSs is a tool to convert a streaming program in the StreamIt language into a dynamically scheduled task based program using StarSs.Totes les empreses de semiconductors produeixen actualment multi-cores. Mòbils,PCs, portàtils, i dispositius mòbils d’Internet necessitaran programari quefaci servir eficientment aquests cores. Escriure programari paral·lel d’altrendiment és difícil, laboriós i propens a errors, incrementant tant el tempsde llançament al mercat com el cost. El programari té una vida més llarga queel maquinari; típicament pren més temps desenvolupar nou programi que noumaquinari, i el programari ja existent pot perdurar molt temps, durant el qualel nombre de cores dels sistemes incrementarà. La productivitat dedesenvolupament i manteniment millorarà si el paral·lelisme i els detallstècnics són gestionats per la màquina, mentre el programador raona sobre elconjunt de l’aplicació.El programari paral·lel hauria de ser escrit en llenguatges específics deldomini. Aquests llenguatges extrauen paral·lelisme implícit, el qual és ocultatper un llenguatge seqüencial com C. Quan l’assignació de memòria i lesestructures de control són gestionades pel compilador, l’estructura iorganització de dades del programi poden ser modificades de manera segura ifiable per les transformacions d’alt nivell del compilador.Un dels dominis de l’aplicació importants és el que consta dels programes destream; aquest programes són estructurats com a nuclis independents queinteractuen només a través de canals d’un sol sentit, anomenats streams. Laprogramació de streams no és aplicable a tots els programes, però sorgeix deforma natural en la codificació i descodificació d’àudio i vídeo, gràfics 3D, iprocessament de senyals digitals. Aquesta representació permet transformacionsd’alt nivell, fins i tot descomposició i fusió de nucli.Aquesta tesi desenvolupa noves tècniques de compilació i sistemes en tempsd’execució per a programació de streams. La primera part d’aquesta tesi esfocalitza amb un compilador de streams de planificació estàtica. Presenta unnou algorisme de partició estàtica, que determina quins nuclis han de serfusionats, per tal d’equilibrar la càrrega en els processadors i en lesinterconnexions. Un bon algorisme de particionat és fonamental per tal de queel compilador produeixi codi eficient. L’algorisme també té en compte elspassos de compilació subseqüents---específicament software pipelining il’arranjament de buffers---i modela la capacitat del compilador per fusionarnuclis. Aquesta tesi també presenta un algorisme estàtic de redimensionament de cues.Aquest algorisme és important quan la memòria és distribuïda, especialment quanles memòries locals són petites. L’algorisme té en compte latències ivariacions en els temps de càlcul, i considera el límit imposat per la mida deles memòries locals.La segona part d’aquesta tesi es centralitza en la planificació dinàmica deprogrames de streams. En primer lloc, investiga el rendiment dels planificadorsdinàmics online, non-preemptive i non-clairvoyant. En segon lloc, proposa dosplanificadors dinàmics per programes de stream. El primer és específicament pera programes de streams unidimensionals. El segon és més general: no necessitael graf de streams, però els overheads són una mica més grans.Aquesta tesi també presenta un conjunt d’eines de suport relacionades amb laprogramació de streams. StarssCheck és una eina de depuració, que és basa enValgrind, per StarSs, un llenguatge de programació paral·lela basat en tasques.Aquesta eina genera un avís cada vegada que el comportament del programa estàen contradicció amb una anotació pragma. Aquest comportament d’una altra manerapodria causar excepcions o situacions de competició. StreamIt to OmpSs és unaeina per convertir un programa de streams codificat en el llenguatge StreamIt aun programa de tasques en StarSs planificat de forma dinàmica.Postprint (published version