Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

Architectural study of reconfigurable photonic networks-on-chip for multi-core processors

Photonic Networks-on-Chip (NoCs) have become a promising route to interconnect processor cores on chip multiprocessors (CMP) in a power efficient way. Although several photonic NoC proposals exist, their use is limited to the communication of large data messages due to a relatively long set-up time for the photonic channels. In this work, we evaluate a reconfigurable photonic NoC in which the topology is adapted automatically to the evolving traffic situation. This way, long photonic channel set-up times can be tolerated which makes our approach more compatible in the context of shared-memory CMPs

Cycle-accurate evaluation of reconfigurable photonic networks-on-chip

There is little doubt that the most important limiting factors of the performance of next-generation Chip Multiprocessors (CMPs) will be the power efficiency and the available communication speed between cores. Photonic Networks-on-Chip (NoCs) have been suggested as a viable route to relieve the off- and on-chip interconnection bottleneck. Low-loss integrated optical waveguides can transport very high-speed data signals over longer distances as compared to on-chip electrical signaling. In addition, with the development of silicon microrings, photonic switches can be integrated to route signals in a data-transparent way. Although several photonic NoC proposals exist, their use is often limited to the communication of large data messages due to a relatively long set-up time of the photonic channels. In this work, we evaluate a reconfigurable photonic NoC in which the topology is adapted automatically (on a microsecond scale) to the evolving traffic situation by use of silicon microrings. To evaluate this system's performance, the proposed architecture has been implemented in a detailed full-system cycle-accurate simulator which is capable of generating realistic workloads and traffic patterns. In addition, a model was developed to estimate the power consumption of the full interconnection network which was compared with other photonic and electrical NoC solutions. We find that our proposed network architecture significantly lowers the average memory access latency (35% reduction) while only generating a modest increase in power consumption (20%), compared to a conventional concentrated mesh electrical signaling approach. When comparing our solution to high-speed circuit-switched photonic NoCs, long photonic channel set-up times can be tolerated which makes our approach directly applicable to current shared-memory CMPs

A Study on Performance and Power Efficiency of Dense Non-Volatile Caches in Multi-Core Systems

In this paper, we present a novel cache design based on Multi-Level Cell Spin-Transfer Torque RAM (MLC STTRAM) that can dynamically adapt the set capacity and associativity to use efficiently the full potential of MLC STTRAM. We exploit the asymmetric nature of the MLC storage scheme to build cache lines featuring heterogeneous performances, that is, half of the cache lines are read-friendly, while the other is write-friendly. Furthermore, we propose to opportunistically deactivate ways in underutilized sets to convert MLC to Single-Level Cell (SLC) mode, which features overall better performance and lifetime. Our ultimate goal is to build a cache architecture that combines the capacity advantages of MLC and performance/energy advantages of SLC. Our experiments show an improvement of 43% in total numbers of conflict misses, 27% in memory access latency, 12% in system performance, and 26% in LLC access energy, with a slight degradation in cache lifetime (about 7%) compared to an SLC cache

Dynamic Energy Management for Chip Multi-processors under Performance Constraints

We introduce a novel algorithm for dynamic energy management (DEM) under performance constraints in chip multi-processors (CMPs). Using the novel concept of delayed instructions count, performance loss estimations are calculated at the end of each control period for each core. In addition, a Kalman filtering based approach is employed to predict workload in the next control period for which voltage-frequency pairs must be selected. This selection is done with a novel dynamic voltage and frequency scaling (DVFS) algorithm whose objective is to reduce energy consumption but without degrading performance beyond the user set threshold. Using our customized Sniper based CMP system simulation framework, we demonstrate the effectiveness of the proposed algorithm for a variety of benchmarks for 16 core and 64 core network-on-chip based CMP architectures. Simulation results show consistent energy savings across the board. We present our work as an investigation of the tradeoff between the achievable energy reduction via DVFS when predictions are done using the effective Kalman filter for different performance penalty thresholds

Analysis of network-on-chip topologies for cost-efficient chip multiprocessors

Abstract not availableMarta Ortín-Obón, Darío Suárez-Gracia, María Villarroya-Gaudó, Cruz Izu, Víctor Viñals-Yúfer

Improving Multiple-CMP Systems Using Token Coherence

Improvements in semiconductor technology now enable Chip Multiprocessors (CMPs). As many future computer systems will use one or more CMPs and support shared memory, such systems will have caches that must be kept coherent. Coherence is a particular challenge for Multiple-CMP (M-CMP) systems. One approach is to use a hierarchical protocol that explicitly separates the intra-CMP coherence protocol from the inter-CMP protocol, but couples them hierarchically to maintain coherence. However, hierarchical protocols are complex, leading to subtle, difficult-to-verify race conditions. Furthermore, most previous hierarchical protocols use directories at one or both levels, incurring indirections—and thus extra latency—for sharing misses, which are common in commercial workloads. In contrast, this paper exploits the separation of correctness substrate and performance policy in the recently-proposed token coherence protocol to develop the first M-CMP coherence protocol that is flat for correctness, but hierarchical for performance. Via model checking studies, we show that flat correctness eases verification. Via simulation with micro-benchmarks, we make new protocol variants more robust under contention. Finally, via simulation with commercial workloads on a commercial operating system, we show that new protocol variants can be 10-50% faster than a hierarchical directory protocol

Performance analysis of a hardware accelerator of dependence management for taskbased dataflow programming models

Along with the popularity of multicore and manycore, task-based dataflow programming models obtain great attention for being able to extract high parallelism from applications without exposing the complexity to programmers. One of these pioneers is the OpenMP Superscalar (OmpSs). By implementing dynamic task dependence analysis, dataflow scheduling and out-of-order execution in runtime, OmpSs achieves high performance using coarse and medium granularity tasks. In theory, for the same application, the more parallel tasks can be exposed, the higher possible speedup can be achieved. Yet this factor is limited by task granularity, up to a point where the runtime overhead outweighs the performance increase and slows down the application. To overcome this handicap, Picos was proposed to support task-based dataflow programming models like OmpSs as a fast hardware accelerator for fine-grained task and dependence management, and a simulator was developed to perform design space exploration. This paper presents the very first functional hardware prototype inspired by Picos. An embedded system based on a Zynq 7000 All-Programmable SoC is developed to study its capabilities and possible bottlenecks. Initial scalability and hardware consumption studies of different Picos designs are performed to find the one with the highest performance and lowest hardware cost. A further thorough performance study is employed on both the prototype with the most balanced configuration and the OmpSs software-only alternative. Results show that our OmpSs runtime hardware support significantly outperforms the software-only implementation currently available in the runtime system for finegrained tasks.This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272) and by the European Research Council RoMoL Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations.Peer ReviewedPostprint (published version