7,442 research outputs found
Stiffness Analysis Of Multi-Chain Parallel Robotic Systems
The paper presents a new stiffness modelling method for multi-chain parallel
robotic manipulators with flexible links and compliant actuating joints. In
contrast to other works, the method involves a FEA-based link stiffness
evaluation and employs a new solution strategy of the kinetostatic equations,
which allows computing the stiffness matrix for singular postures and to take
into account influence of the external forces. The advantages of the developed
technique are confirmed by application examples, which deal with stiffness
analysis of a parallel manipulator of the Orthoglide famil
Kinematic calibration of Orthoglide-type mechanisms from observation of parallel leg motions
The paper proposes a new calibration method for parallel manipulators that
allows efficient identification of the joint offsets using observations of the
manipulator leg parallelism with respect to the base surface. The method
employs a simple and low-cost measuring system, which evaluates deviation of
the leg location during motions that are assumed to preserve the leg
parallelism for the nominal values of the manipulator parameters. Using the
measured deviations, the developed algorithm estimates the joint offsets that
are treated as the most essential parameters to be identified. The validity of
the proposed calibration method and efficiency of the developed numerical
algorithms are confirmed by experimental results. The sensitivity of the
measurement methods and the calibration accuracy are also studied
Compliance error compensation technique for parallel robots composed of non-perfect serial chains
The paper presents the compliance errors compensation technique for
over-constrained parallel manipulators under external and internal loadings.
This technique is based on the non-linear stiffness modeling which is able to
take into account the influence of non-perfect geometry of serial chains caused
by manufacturing errors. Within the developed technique, the deviation
compensation reduces to an adjustment of a target trajectory that is modified
in the off-line mode. The advantages and practical significance of the proposed
technique are illustrated by an example that deals with groove milling by the
Orthoglide manipulator that considers different locations of the workpiece. It
is also demonstrated that the impact of the compliance errors and the errors
caused by inaccuracy in serial chains cannot be taken into account using the
superposition principle.Comment: arXiv admin note: text overlap with arXiv:1204.175
Pose, posture, formation and contortion in kinematic systems
The concepts of pose, posture, formation and contortion are defined for serial, parallel and hybrid kinematic systems. Workspace and jointspace structure is examined in terms of these concepts. The inter-relationships of pose, posture, formation and contortion are explored for a range of robot workspace and jointspace types
Accuracy Improvement for Stiffness Modeling of Parallel Manipulators
The paper focuses on the accuracy improvement of stiffness models for
parallel manipulators, which are employed in high-speed precision machining. It
is based on the integrated methodology that combines analytical and numerical
techniques and deals with multidimensional lumped-parameter models of the
links. The latter replace the link flexibility by localized 6-dof virtual
springs describing both translational/rotational compliance and the coupling
between them. There is presented detailed accuracy analysis of the stiffness
identification procedures employed in the commercial CAD systems (including
statistical analysis of round-off errors, evaluating the confidence intervals
for stiffness matrices). The efficiency of the developed technique is confirmed
by application examples, which deal with stiffness analysis of translational
parallel manipulators
Dynamics of the Orthoglide parallel robot
Recursive matrix relations for kinematics and dynamics of the Orthoglide
parallel robot having three concurrent prismatic actuators are established in
this paper. These are arranged according to the Cartesian coordinate system
with fixed orientation, which means that the actuating directions are normal to
each other. Three identical legs connecting to the moving platform are located
on three planes being perpendicular to each other too. Knowing the position and
the translation motion of the platform, we develop the inverse kinematics
problem and determine the position, velocity and acceleration of each element
of the robot. Further, the principle of virtual work is used in the inverse
dynamic problem. Some matrix equations offer iterative expressions and graphs
for the input forces and the powers of the three actuators
CAD-based approach for identification of elasto-static parameters of robotic manipulators
The paper presents an approach for the identification of elasto-static
parameters of a robotic manipulator using the virtual experiments in a CAD
environment. It is based on the numerical processing of the data extracted from
the finite element analysis results, which are obtained for isolated
manipulator links. This approach allows to obtain the desired stiffness
matrices taking into account the complex shape of the links, couplings between
rotational/translational deflections and particularities of the joints
connecting adjacent links. These matrices are integral parts of the manipulator
lumped stiffness model that are widely used in robotics due to its high
computational efficiency. To improve the identification accuracy,
recommendations for optimal settings of the virtual experiments are given, as
well as relevant statistical processing techniques are proposed. Efficiency of
the developed approach is confirmed by a simulation study that shows that the
accuracy in evaluating the stiffness matrix elements is about 0.1%.Comment: arXiv admin note: substantial text overlap with arXiv:0909.146
Compensation of compliance errors in parallel manipulators composed of non-perfect kinematic chains
The paper is devoted to the compliance errors compensation for parallel
manipulators under external loading. Proposed approach is based on the
non-linear stiffness modeling and reduces to a proper adjusting of a target
trajectory. In contrast to previous works, in addition to compliance errors
caused by machining forces, the problem of assembling errors caused by
inaccuracy in the kinematic chains is considered. The advantages and practical
significance of the proposed approach are illustrated by examples that deal
with groove milling with Orthoglide manipulator.Comment: Advances in Robot Kinematics, France (2012
- …