7,562 research outputs found
Accurate Tracking of Aggressive Quadrotor Trajectories using Incremental Nonlinear Dynamic Inversion and Differential Flatness
Autonomous unmanned aerial vehicles (UAVs) that can execute aggressive (i.e.,
high-speed and high-acceleration) maneuvers have attracted significant
attention in the past few years. This paper focuses on accurate tracking of
aggressive quadcopter trajectories. We propose a novel control law for tracking
of position and yaw angle and their derivatives of up to fourth order,
specifically, velocity, acceleration, jerk, and snap along with yaw rate and
yaw acceleration. Jerk and snap are tracked using feedforward inputs for
angular rate and angular acceleration based on the differential flatness of the
quadcopter dynamics. Snap tracking requires direct control of body torque,
which we achieve using closed-loop motor speed control based on measurements
from optical encoders attached to the motors. The controller utilizes
incremental nonlinear dynamic inversion (INDI) for robust tracking of linear
and angular accelerations despite external disturbances, such as aerodynamic
drag forces. Hence, prior modeling of aerodynamic effects is not required. We
rigorously analyze the proposed control law through response analysis, and we
demonstrate it in experiments. The controller enables a quadcopter UAV to track
complex 3D trajectories, reaching speeds up to 12.9 m/s and accelerations up to
2.1g, while keeping the root-mean-square tracking error down to 6.6 cm, in a
flight volume that is roughly 18 m by 7 m and 3 m tall. We also demonstrate the
robustness of the controller by attaching a drag plate to the UAV in flight
tests and by pulling on the UAV with a rope during hover.Comment: To be published in IEEE Transactions on Control Systems Technology.
Revision: new set of experiments at increased speed (up to 12.9 m/s), updated
controller design using quaternion representation, new video available at
https://youtu.be/K15lNBAKDC
Yaw Rate and Sideslip Angle Control Through Single Input Single Output Direct Yaw Moment Control
Electric vehicles with independently controlled drivetrains allow torque vectoring, which enhances active safety and handling qualities. This article proposes an approach for the concurrent control of yaw rate and sideslip angle based on a single-input single-output (SISO) yaw rate controller. With the SISO formulation, the reference yaw rate is first defined according to the vehicle handling requirements and is then corrected based on the actual sideslip angle. The sideslip angle contribution guarantees a prompt corrective action in critical situations such as incipient vehicle oversteer during limit cornering in low tire-road friction conditions. A design methodology in the frequency domain is discussed, including stability analysis based on the theory of switched linear systems. The performance of the control structure is assessed via: 1) phase-plane plots obtained with a nonlinear vehicle model; 2) simulations with an experimentally validated model, including multiple feedback control structures; and 3) experimental tests on an electric vehicle demonstrator along step steer maneuvers with purposely induced and controlled vehicle drift. Results show that the SISO controller allows constraining the sideslip angle within the predetermined thresholds and yields tire-road friction adaptation with all the considered feedback controllers
A Real-time Nonlinear Model Predictive Controller for Yaw Motion Optimization of Distributed Drive Electric Vehicles
This paper proposes a real-time nonlinear model
predictive control (NMPC) strategy for direct yaw moment control
(DYC) of distributed drive electric vehicles (DDEVs). The NMPC
strategy is based on a control-oriented model built by integrating
a single track vehicle model with the Magic Formula (MF) tire
model. To mitigate the NMPC computational cost, the
continuation/generalized minimal residual (C/GMRES) algorithm
is employed and modified for real-time optimization. Since the
traditional C/GMRES algorithm cannot directly solve the
inequality constraint problem, the external penalty method is
introduced to transform inequality constraints into an
equivalently unconstrained optimization problem. Based on the
Pontryagin’s minimum principle (PMP), the existence and
uniqueness for solution of the proposed C/GMRES algorithm are
proven. Additionally, to achieve fast initialization in C/GMRES
algorithm, the varying predictive duration is adopted so that the
analytic expressions of optimally initial solutions in C/GMRES
algorithm can be derived and gained. A Karush-Kuhn-Tucker
(KKT) condition based control allocation method distributes the
desired traction and yaw moment among four independent
motors. Numerical simulations are carried out by combining
CarSim and Matlab/Simulink to evaluate the effectiveness of the
proposed strategy. Results demonstrate that the real-time NMPC
strategy can achieve superior vehicle stability performance,
guarantee the given safety constraints, and significantly reduce the
computational efforts
Torque vectoring based drive assistance system for turning an electric narrow tilting vehicle
The increasing number of cars leads to traffic congestion and limits parking issue in urban area. The narrow tilting vehicles therefore can potentially become the next generation of city cars due to its narrow width. However, due to the difficulty in leaning a narrow tilting vehicle, a drive assistance strategy is required to maintain its roll stability during a turn. This article presents an effective approach using torque vectoring method to assist the rider in balancing the narrow tilting vehicles, thus reducing the counter-steering requirements. The proposed approach is designed as the combination of two torque controllers: steer angle–based torque vectoring controller and tilting compensator–based torque vectoring controller. The steer angle–based torque vectoring controller reduces the counter-steering process via adjusting the vectoring torque based on the steering angle from the rider. Meanwhile, the tilting compensator–based torque vectoring controller develops the steer angle–based torque vectoring with an additional tilting compensator to help balancing the leaning behaviour of narrow tilting vehicles. Numerical simulations with a number of case studies have been carried out to verify the performance of designed controllers. The results imply that the counter-steering process can be eliminated and the roll stability performance can be improved with the usage of the presented approach
DIAGRAMS, FUNCTIONAL AND CONSTRUCTIVE SOLUTIONS OF THE STABILITY CONTROL SYSTEMS FOR AUTOMOTIVE APPLICATION
The modern car must correspond to certain requirements regarding the driver safety and more than that it must convince the potential buyer that it will offer him the safety he is so much in need of. For that reason the number and the diversity of the safety systems have increased so fast. Despite all this for the time being it can not be stated that a particular vehicle is totally safe and it can come through any difficult situation. Because of that the research in the field is carried on and the number of those who propose solutions mend to improve the vehicle behavior is getting bigger.active safety, vehicle, control
Direct yaw-moment control of an in-wheel-motored electric vehicle based on body slip angle fuzzy observer
A stabilizing observer-based control algorithm for an in-wheel-motored vehicle is proposed, which generates direct yaw moment to compensate for the state deviations. The control scheme is based on a fuzzy rule-based body slip angle (beta) observer. In the design strategy of the fuzzy observer, the vehicle dynamics is represented by Takagi-Sugeno-like fuzzy models. Initially, local equivalent vehicle models are built using the linear approximations of vehicle dynamics for low and high lateral acceleration operating regimes, respectively. The optimal beta observer is then designed for each local model using Kalman filter theory. Finally, local observers are combined to form the overall control system by using fuzzy rules. These fuzzy rules represent the qualitative relationships among the variables associated with the nonlinear and uncertain nature of vehicle dynamics, such as tire force saturation and the influence of road adherence. An adaptation mechanism for the fuzzy membership functions has been incorporated to improve the accuracy and performance of the system. The effectiveness of this design approach has been demonstrated in simulations and in a real-time experimental settin
A state-of-the-art review on torque distribution strategies aimed at enhancing energy efficiency for fully electric vehicles with independently actuated drivetrains
© 2019, Levrotto and Bella. All rights reserved. Electric vehicles are the future of private passenger transportation. However, there are still several technological barriers that hinder the large scale adoption of electric vehicles. In particular, their limited autonomy motivates studies on methods for improving the energy efficiency of electric vehicles so as to make them more attractive to the market. This paper provides a concise review on the current state-of-the-art of torque distribution strategies aimed at enhancing energy efficiency for fully electric vehicles with independently actuated drivetrains (FEVIADs). Starting from the operating principles, which include the "control allocation" problem, the peculiarities of each proposed solution are illustrated. All the existing techniques are categorized based on a selection of parameters deemed relevant to provide a comprehensive overview and understanding of the topic. Finally, future concerns and research perspectives for FEVIAD are discussed
Pterodactyl: Development and Comparison of Control Architectures for a Mechanically Deployed Entry Vehicle
The Pterodactyl project, seeks to advance the current state-of-the-art for entry vehicles by developing novel guidance and control technologies for Deployable Entry Vehicles (DEVs) that can be applied to various entry vehicle configurations. This paper details the efforts on the NASA-funded Pterodactyl project to investigate and implement multiple control techniques for an asymmetric mechanical DEV. We design multiple control architectures for a Pterodactyl Baseline Vehicle (PBV) and evaluate their performance in achieving varying guidance commands during entry. The control architectures studied are (i) propulsive control systems such as reaction control systems and (ii) non-propulsive control systems such as aerodynamic control surfaces and internal moving masses. For each system, state-feedback integral controllers based on linear quadratic regulator (LQR) optimal control methods are designed to track guidance commands of either (i) bank angle or (ii) angle of attack and sideslip angle as determined by the desired guidance trajectory. All control systems are compared for a lunar return reference mission and by providing a comparative analysis of these systems, configurations, and performance, the efforts detailed in this paper and the Pterodactyl project as a whole will help entry vehicle system designers determine suitable control architectures for integration with DEVs and other entry vehicle types
The application of optimal control technqiues to advanced manned missions, volume 1
Two problems are presented in the area of optimal control and its application to the design of attitude control systems for advanced complex aerospace vehicles. The problems discussed are specification of performance criteria in terms of structural load minimization and/or maximum orbital payload injection requirements of the controlled vehicle; and formulation and solution of the optimization problem such that practical control systems are obtained
- …