221 research outputs found
High Quality 3D Shape Reconstruction via Digital Refocusing and Pupil Apodization in Multi-wavelength Holographic Interferometry.
Multi-wavelength holographic interferometry (MWHI) has good potential for evolving into a high quality 3D shape reconstruction technique. There are several remaining challenges, including 1) depth-of-field limitation, leading to axial dimension inaccuracy of out-of-focus objects; and 2) smearing from shiny smooth objects to their dark dull neighbors, generating fake measurements within the dark area. This research is motivated by the goal of developing an advanced optical metrology system that provides accurate 3D profiles for target object or objects of axial dimension larger than the depth-of-field, and for objects with dramatically different surface conditions.
The idea of employing digital refocusing in MWHI has been proposed as a solution to the depth-of-field limitation. One the one hand, traditional single wavelength refocusing formula is revised to reduce sensitivity to wavelength error. Investigation over real example demonstrates promising accuracy and repeatability of reconstructed 3D profiles. On the other hand, a phase contrast based focus detection criterion is developed especially for MWHI, which overcomes the problem of phase unwrapping. The combination for these two innovations gives birth to a systematic strategy of acquiring high quality 3D profiles. Following the first phase contrast based focus detection step, interferometric distance measurement by MWHI is implemented as a next step to conduct relative focus detection with high accuracy. This strategy results in ±100mm 3D profile with micron level axial accuracy, which is not available in traditional extended focus image (EFI) solutions.
Pupil apodization has been implemented to address the second challenge of smearing. The process of reflective rough surface inspection has been mathematically modeled, which explains the origin of stray light and the necessity of replacing hard-edged pupil with one of gradually attenuating transmission (apodization). Metrics to optimize pupil types and parameters have been chosen especially for MWHI. A Gaussian apodized pupil has been installed and tested. A reduction of smearing in measurement result has been experimentally demonstrated.Ph.D.Mechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91461/1/xulium_1.pd
Diffraction-limited plenoptic imaging with correlated light
Traditional optical imaging faces an unavoidable trade-off between resolution
and depth of field (DOF). To increase resolution, high numerical apertures (NA)
are needed, but the associated large angular uncertainty results in a limited
range of depths that can be put in sharp focus. Plenoptic imaging was
introduced a few years ago to remedy this trade off. To this aim, plenoptic
imaging reconstructs the path of light rays from the lens to the sensor.
However, the improvement offered by standard plenoptic imaging is practical and
not fundamental: the increased DOF leads to a proportional reduction of the
resolution well above the diffraction limit imposed by the lens NA. In this
paper, we demonstrate that correlation measurements enable pushing plenoptic
imaging to its fundamental limits of both resolution and DOF. Namely, we
demonstrate to maintain the imaging resolution at the diffraction limit while
increasing the depth of field by a factor of 7. Our results represent the
theoretical and experimental basis for the effective development of the
promising applications of plenoptic imaging.Comment: 10 pages, 10 figure
Compressive Holographic Video
Compressed sensing has been discussed separately in spatial and temporal
domains. Compressive holography has been introduced as a method that allows 3D
tomographic reconstruction at different depths from a single 2D image. Coded
exposure is a temporal compressed sensing method for high speed video
acquisition. In this work, we combine compressive holography and coded exposure
techniques and extend the discussion to 4D reconstruction in space and time
from one coded captured image. In our prototype, digital in-line holography was
used for imaging macroscopic, fast moving objects. The pixel-wise temporal
modulation was implemented by a digital micromirror device. In this paper we
demonstrate temporal super resolution with multiple depths recovery
from a single image. Two examples are presented for the purpose of recording
subtle vibrations and tracking small particles within 5 ms.Comment: 12 pages, 6 figure
Multi-contrast imaging and digital refocusing on a mobile microscope with a domed LED array
We demonstrate the design and application of an add-on device for improving the diagnostic and research capabilities of CellScope--a low-cost, smartphone-based point-of-care microscope. We replace the single LED illumination of the original CellScope with a programmable domed LED array. By leveraging recent advances in computational illumination, this new device enables simultaneous multi-contrast imaging with brightfield, darkfield, and phase imaging modes. Further, we scan through illumination angles to capture lightfield datasets, which can be used to recover 3D intensity and phase images without any hardware changes. This digital refocusing procedure can be used for either 3D imaging or software-only focus correction, reducing the need for precise mechanical focusing during field experiments. All acquisition and processing is performed on the mobile phone and controlled through a smartphone application, making the computational microscope compact and portable. Using multiple samples and different objective magnifications, we demonstrate that the performance of our device is comparable to that of a commercial microscope. This unique device platform extends the field imaging capabilities of CellScope, opening up new clinical and research possibilities
Roadmap on digital holography [Invited]
This Roadmap article on digital holography provides an overview of a vast array of research activities in the field of digital holography. The paper consists of a series of 25 sections from the prominent experts in digital holography presenting various aspects of the field on sensing, 3D imaging and displays, virtual and augmented reality, microscopy, cell identification, tomography, label-free live cell imaging, and other applications. Each section represents the vision of its author to describe the significant progress, potential impact, important developments, and challenging issues in the field of digital holography
- …