Remote machine condition monitoring based on power supply measurements

The most widely used rotating machines in the industry are three phase alternative current (AC) induction machines. With the advances in variable speed drive (VSD) technology, they have become even more reliable than their direct current (DC) counterpart. However, inevitably these motors soon begin to fail with time due to mechanical, electrical or thermal stress hence the need for condition monitoring (CM). Condition monitoring systems help keep machines running productively by detecting potential equipment failures before it actually fails. Many condition monitoring methods exist on the market including vibration monitoring; acoustic emission monitoring, thermal monitoring, chemical monitoring, current monitoring but most of these methods require additional sensors and expensive data acquisition system on top of a specialise software tool. This all increases the cost of ownership and maintenance. For more efficient monitoring of induction motor drive systems, this research investigates an innovative remote monitoring system using existing data available in AC drives based on AC motor operating process. This research uses standard automation components already present in most automated control systems. A remote data communication platform is developed, allowing access to the control data remotely over a wireless network and internet using PLC and SCADA system. Remote machine condition monitoring is not a new idea but its application to machine monitoring based on power supply parameters indirectly measured by an inverter is new. To evaluate the basic performance of the platform, the monitoring of shaft misalignment, a typical fault in mechanical system is investigated using an in-house gearbox test rig. It has resulted in a model based detection method based on different speed and load settings against the motor current feedback read by the inverter. The results have demonstrated that the platform is reliable and effective. In addition the monitoring method can be employed to detect and diagnose different degrees of misalignment in real time. This dissertation has major contributions to knowledge which includes: Understanding of real life machine condition monitoring problems for this application, including use of wireless sensor, communication over Industrial Ethernet and network security. The use of standard automation components (PLC and SCADA) in machine condition monitoring. MSc Research (Engineering) Thesis x An improved gearbox test rig platform which has the capability of remote control, acquiring and transferring data for monitoring induction machine drive system. The presented work shows that any machine using automated components such as PLC and SCADA and incorporating motor drive systems and other actuators has the potential to use the automated components for control, condition monitoring and reporting but this will require more tests to be done using the proposed platform

Current Error Based Compensations for VSC Current Control in Weak Grid for Wind Farm Applications

A novel current control strategy is proposed for voltage source converter connecting to weak grid using conventional current vector control with additional current error based voltage angle and magnitude compensations. For connecting to very weak AC network, conventional vector control is proved to be unstable, whereas the proposed current error based compensations can significantly improve system stability. In this way, the proposed control can still benefit from the presence of current closed-loop control without the need for control switching during large AC voltage variations. Comprehensive frequency domain model is established to analyze stability performance. Comprehensive time domain simulations are further carried out to validate its effectiveness and robustness by demonstrating its current control performance during a three-phase fault, multiple-converter situation and various grid strength conditions

Protection and Control of Active Distribution Networks and Microgrids

This thesis is mainly focused on (i) modeling and control of Electronically Coupled Distributed Energy Resources (EC-DERs) under severe network imbalances and transient incidents, and (ii) protection of active distribution networks and microgrids against different types of faults. In the first part, an enhanced control strategy is proposed to improve the performance of EC-DERs under faults and transient disturbances, in a multi-unit microgrid setting. With the use of proposed control strategy, the host microgrid can ride through network faults, irrespective of whether they take place within the microgrid jurisdiction or impact the upstream grid, and quickly reclaim its pre-fault operating conditions to improve post-fault recovery. Further, the proposed control scheme enables the host microgrid to retain its power quality for the duration of the faults, in both modes of operation, which is a desirable property for detection of certain classes of faults, as well as for sensitive loads. In the second part of the thesis, appropriate strategies are proposed for protection of low- and medium-voltage microgrids in the islanded mode as well as the grid-connected mode of operation. The proposed protection strategies aim to detect and isolate the faults that impact the microgrid, in a selective manner. The proposed strategies can be implemented through programmable microprocessor-based relays which are commercially available; hence, the structure of new relays that enable the proposed protection strategies are also discussed in the thesis. In addition, the thesis investigates the operation of an existing distribution network as a microgrid. Thus, practical control and protection strategies that enable off-grid operation of the distribution network (considering the system constraints) are discussed. The effectiveness of the proposed control and protection strategies are demonstrated through time-domain simulation studies conducted in the PSCAD/EMTDC software environment

Custom Integrated Circuits

Contains reports on twelve research projects.Analog Devices, Inc.International Business Machines, Inc.Joint Services Electronics Program (Contract DAAL03-86-K-0002)Joint Services Electronics Program (Contract DAAL03-89-C-0001)U.S. Air Force - Office of Scientific Research (Grant AFOSR 86-0164)Rockwell International CorporationOKI Semiconductor, Inc.U.S. Navy - Office of Naval Research (Contract N00014-81-K-0742)Charles Stark Draper LaboratoryNational Science Foundation (Grant MIP 84-07285)National Science Foundation (Grant MIP 87-14969)Battelle LaboratoriesNational Science Foundation (Grant MIP 88-14612)DuPont CorporationDefense Advanced Research Projects Agency/U.S. Navy - Office of Naval Research (Contract N00014-87-K-0825)American Telephone and TelegraphDigital Equipment CorporationNational Science Foundation (Grant MIP-88-58764

First M87 Event Horizon Telescope Results. II. Array and Instrumentation

The Event Horizon Telescope (EHT) is a very long baseline interferometry (VLBI) array that comprises millimeter- and submillimeter-wavelength telescopes separated by distances comparable to the diameter of the Earth. At a nominal operating wavelength of ~1.3 mm, EHT angular resolution (λ/D) is ~25 μas, which is sufficient to resolve nearby supermassive black hole candidates on spatial and temporal scales that correspond to their event horizons. With this capability, the EHT scientific goals are to probe general relativistic effects in the strong-field regime and to study accretion and relativistic jet formation near the black hole boundary. In this Letter we describe the system design of the EHT, detail the technology and instrumentation that enable observations, and provide measures of its performance. Meeting the EHT science objectives has required several key developments that have facilitated the robust extension of the VLBI technique to EHT observing wavelengths and the production of instrumentation that can be deployed on a heterogeneous array of existing telescopes and facilities. To meet sensitivity requirements, high-bandwidth digital systems were developed that process data at rates of 64 gigabit s^(−1), exceeding those of currently operating cm-wavelength VLBI arrays by more than an order of magnitude. Associated improvements include the development of phasing systems at array facilities, new receiver installation at several sites, and the deployment of hydrogen maser frequency standards to ensure coherent data capture across the array. These efforts led to the coordination and execution of the first Global EHT observations in 2017 April, and to event-horizon-scale imaging of the supermassive black hole candidate in M87

Embedding runtime verification post-deployment for real-time health management of safety-critical systems

As cyber-physical systems increase in both complexity and criticality, formal methods have gained traction for design-time verification of safety properties. A lightweight formal method, runtime verification (RV), embeds checks necessary for safety-critical system health management; however, these techniques have been slow to appear in practice despite repeated calls by both industry and academia to leverage them. Additionally, the state-of-the-art in RV lacks a best practice approach when a deployed system requires increased flexibility due to a change in mission, or in response to an emergent condition not accounted for at design time. Human-robot interaction necessitates stringent safety guarantees to protect humans sharing the workspace, particularly in hazardous environments. For example, Robonaut2 (R2) developed an emergent fault while deployed to the International Space Station. Possibly-inaccurate actuator readings trigger the R2 safety system, preventing further motion of a joint until a ground-control operator determines the root-cause and initiates proper corrective action. Operator time is scarce and expensive; when waiting, R2 is an obstacle instead of an asset. We adapt the Realizable, Responsive, Unobtrusive Unit (R2U2) RV framework for resource-constrained environments. We retrofit the R2 motor controller, embedding R2U2 within the remaining resources of the Field-Programmable Gate Array (FPGA) controlling the joint actuator. We add online, stream-based, real-time system health monitoring in a provably unobtrusive way that does not interfere with the control of the joint. We design and embed formal temporal logic specifications that disambiguate the emergent faults and enable automated corrective actions. We overview the challenges and techniques for formally specifying behaviors of an existing command and data bus. We present our specification debugging, validation, and refinement steps. We demonstrate success in the Robonaut2 case study, then detail effective techniques and lessons learned from adding RV with real-time fault disambiguation under the constraints of a deployed system

The design of micro-processors for digital protection of power systems

Imperial Users onl

Viking '75 spacecraft design and test summary. Volume 1: Lander design

The Viking Mars program is summarized. The design of the Viking lander spacecraft is described