Hardware Implementations for Symmetric Key Cryptosystems

The utilization of global communications network for supporting new electronic applications is growing. Many applications provided over the global communications network involve exchange of security-sensitive information between different entities. Often, communicating entities are located at different locations around the globe. This demands deployment of certain mechanisms for providing secure communications channels between these entities. For this purpose, cryptographic algorithms are used by many of today\u27s electronic applications to maintain security. Cryptographic algorithms provide set of primitives for achieving different security goals such as: confidentiality, data integrity, authenticity, and non-repudiation. In general, two main categories of cryptographic algorithms can be used to accomplish any of these security goals, namely, asymmetric key algorithms and symmetric key algorithms. The security of asymmetric key algorithms is based on the hardness of the underlying computational problems, which usually require large overhead of space and time complexities. On the other hand, the security of symmetric key algorithms is based on non-linear transformations and permutations, which provide efficient implementations compared to the asymmetric key ones. Therefore, it is common to use asymmetric key algorithms for key exchange, while symmetric key counterparts are deployed in securing the communications sessions. This thesis focuses on finding efficient hardware implementations for symmetric key cryptosystems targeting mobile communications and resource constrained applications. First, efficient lightweight hardware implementations of two members of the Welch-Gong (WG) family of stream ciphers, the WG$\left(29,11\right)$ and WG-$16$, are considered for the mobile communications domain. Optimizations in the WG$\left(29,11\right)$ stream cipher are considered when the $GF\left(2^{29}\right)$ elements are represented in either the Optimal normal basis type-II (ONB-II) or the Polynomial basis (PB). For WG-$16$, optimizations are considered only for PB representations of the $GF\left(2^{16}\right)$ elements. In this regard, optimizations for both ciphers are accomplished mainly at the arithmetic level through reducing the number of field multipliers, based on novel trace properties. In addition, other optimization techniques such as serialization and pipelining, are also considered. After this, the thesis explores efficient hardware implementations for digit-level multiplication over binary extension fields $GF\left(2^{m}\right)$. Efficient digit-level $GF\left(2^{m}\right)$ multiplications are advantageous for ultra-lightweight implementations, not only in symmetric key algorithms, but also in asymmetric key algorithms. The thesis introduces new architectures for digit-level $GF\left(2^{m}\right)$ multipliers considering the Gaussian normal basis (GNB) and PB representations of the field elements. The new digit-level $GF\left(2^{m}\right)$ single multipliers do not require loading of the two input field elements in advance to computations. This feature results in high throughput fast multiplication in resource constrained applications with limited capacity of input data-paths. The new digit-level $GF\left(2^{m}\right)$ single multipliers are considered for both the GNB and PB. In addition, for the GNB representation, new architectures for digit-level $GF\left(2^{m}\right)$ hybrid-double and hybrid-triple multipliers are introduced. The new digit-level $GF\left(2^{m}\right)$ hybrid-double and hybrid-triple GNB multipliers, respectively, accomplish the multiplication of three and four field elements using the latency required for multiplying two field elements. Furthermore, a new hardware architecture for the eight-ary exponentiation scheme is proposed by utilizing the new digit-level $GF\left(2^{m}\right)$ hybrid-triple GNB multipliers

Bit-parallel word-serial polynomial basis finite field multiplier in GF(2(233)).

Smart card gains extensive uses as a cryptographic hardware in security applications in daily life. The characteristics of smart card require that the cryptographic hardware inside the smart card have the trade-off between area and speed. There are two main public key cryptosystems, these are RSA cryptosystem and elliptic curve (EC) cryptosystem. EC has many advantages compared with RSA such as shorter key length and more suitable for VLSI implementation. Such advantages make EC an ideal candidate for smart card. Finite field multiplier is the key component in EC hardware. In this thesis, bit-parallel word-serial (BPWS) polynomial basis (PB) finite field multipliers are designed. Such architectures trade-off area with speed and are very useful for smart card. An ASIC chip which can perform finite field multiplication and finite field squaring using the BPWS PB finite field multiplier is designed in this thesis. The proposed circuit has been implemented using TSMC 0.18 CMOS technology. A novel 8 x 233 bit-parallel partial product generator is also designed. This new partial product generator has low circuit complexity. The design algorithm can be easily extended to w x m bit-parallel partial product generator for GF(2m).Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .T36. Source: Masters Abstracts International, Volume: 43-01, page: 0286. Advisers: H. Wu; M. Ahmadi. Thesis (M.A.Sc.)--University of Windsor (Canada), 2004

Efficient Arithmetic for the Implementation of Elliptic Curve Cryptography

The technology of elliptic curve cryptography is now an important branch in public-key based crypto-system. Cryptographic mechanisms based on elliptic curves depend on the arithmetic of points on the curve. The most important arithmetic is multiplying a point on the curve by an integer. This operation is known as elliptic curve scalar (or point) multiplication operation. A cryptographic device is supposed to perform this operation efficiently and securely. The elliptic curve scalar multiplication operation is performed by combining the elliptic curve point routines that are defined in terms of the underlying finite field arithmetic operations. This thesis focuses on hardware architecture designs of elliptic curve operations. In the first part, we aim at finding new architectures to implement the finite field arithmetic multiplication operation more efficiently. In this regard, we propose novel schemes for the serial-out bit-level (SOBL) arithmetic multiplication operation in the polynomial basis over F_2^m. We show that the smallest SOBL scheme presented here can provide about 26-30\% reduction in area-complexity cost and about 22-24\% reduction in power consumptions for F_2^{163} compared to the current state-of-the-art bit-level multiplier schemes. Then, we employ the proposed SOBL schemes to present new hybrid-double multiplication architectures that perform two multiplications with latency comparable to the latency of a single multiplication. Then, in the second part of this thesis, we investigate the different algorithms for the implementation of elliptic curve scalar multiplication operation. We focus our interest in three aspects, namely, the finite field arithmetic cost, the critical path delay, and the protection strength from side-channel attacks (SCAs) based on simple power analysis. In this regard, we propose a novel scheme for the scalar multiplication operation that is based on processing three bits of the scalar in the exact same sequence of five point arithmetic operations. We analyse the security of our scheme and show that its security holds against both SCAs and safe-error fault attacks. In addition, we show how the properties of the proposed elliptic curve scalar multiplication scheme yields an efficient hardware design for the implementation of a single scalar multiplication on a prime extended twisted Edwards curve incorporating 8 parallel multiplication operations. Our comparison results show that the proposed hardware architecture for the twisted Edwards curve model implemented using the proposed scalar multiplication scheme is the fastest secure SCA protected scalar multiplication scheme over prime field reported in the literature

Fast Modular Reduction for Large-Integer Multiplication

The work contained in this thesis is a representation of the successful attempt to speed-up the modular reduction as an independent step of modular multiplication, which is the central operation in public-key cryptosystems. Based on the properties of Mersenne and Quasi-Mersenne primes, four distinct sets of moduli have been described, which are responsible for converting the single-precision multiplication prevalent in many of today\u27s techniques into an addition operation and a few simple shift operations. A novel algorithm has been proposed for modular folding. With the backing of the special moduli sets, the proposed algorithm is shown to outperform (speed-wise) the Modified Barrett algorithm by 80% for operands of length 700 bits, the least speed-up being around 70% for smaller operands, in the range of around 100 bits

Studies on high-speed hardware implementation of cryptographic algorithms

Cryptographic algorithms are ubiquitous in modern communication systems where they have a central role in ensuring information security. This thesis studies efficient implementation of certain widely-used cryptographic algorithms. Cryptographic algorithms are computationally demanding and software-based implementations are often too slow or power consuming which yields a need for hardware implementation. Field Programmable Gate Arrays (FPGAs) are programmable logic devices which have proven to be highly feasible implementation platforms for cryptographic algorithms because they provide both speed and programmability. Hence, the use of FPGAs for cryptography has been intensively studied in the research community and FPGAs are also the primary implementation platforms in this thesis. This thesis presents techniques allowing faster implementations than existing ones. Such techniques are necessary in order to use high-security cryptographic algorithms in applications requiring high data rates, for example, in heavily loaded network servers. The focus is on Advanced Encryption Standard (AES), the most commonly used secret-key cryptographic algorithm, and Elliptic Curve Cryptography (ECC), public-key cryptographic algorithms which have gained popularity in the recent years and are replacing traditional public-key cryptosystems, such as RSA. Because these algorithms are well-defined and widely-used, the results of this thesis can be directly applied in practice. The contributions of this thesis include improvements to both algorithms and techniques for implementing them. Algorithms are modified in order to make them more suitable for hardware implementation, especially, focusing on increasing parallelism. Several FPGA implementations exploiting these modifications are presented in the thesis including some of the fastest implementations available in the literature. The most important contributions of this thesis relate to ECC and, specifically, to a family of elliptic curves providing faster computations called Koblitz curves. The results of this thesis can, in their part, enable increasing use of cryptographic algorithms in various practical applications where high computation speed is an issue

Hardware implementation of elliptic curve Diffie-Hellman key agreement scheme in GF(p)

With the advent of technology there are many applications that require secure communication. Elliptic Curve Public-key Cryptosystems are increasingly becoming popular due to their small key size and efficient algorithm. Elliptic curves are widely used in various key exchange techniques including Diffie-Hellman Key Agreement scheme. Modular multiplication and modular division are one of the basic operations in elliptic curve cryptography. Much effort has been made in developing efficient modular multiplication designs, however few works has been proposed for the modular division. Nevertheless, these operations are needed in various cryptographic systems. This thesis examines various scalable implementations of elliptic curve scalar multiplication employing multiplicative inverse or field division in GF(p) focussing mainly on modular divison architectures. Next, this thesis presents a new architecture for modular division based on the variant of Extended Binary GCD algorithm. The main contribution at system level architecture to the modular division unit is use of counters in place of shift registers that are basis of the algorithm and modifying the algorithm to introduce a modular correction unit for the output logic. This results in 62% increase in speed with respect to a prototype design. Finally, using the modular division architecture an Elliptic Curve ALU in GF(p) was implemented which can be used as the core arithmetic unit of an elliptic curve processor. The resulting architecture was targeted to Xilinx Vertex2v6000-bf957 FPGA device and can be implemented for different elliptic curves for almost all practical values of field p. The frequency of the ALU is 58.8 MHz for 128-bits utilizing 20% of the device at 27712 gates which is 30% faster than a prototype implementation with a 2% increase in area utilization. The ALU was tested to perform Diffie-Hellman Key Agreement Scheme and is suitable for other public-key cryptographic algorithms

Breaking ECC2K-130

Elliptic-curve cryptography is becoming the standard public-key primitive not only for mobile devices but also for high-security applications. Advantages are the higher cryptographic strength per bit in comparison with RSA and the higher speed in implementations. To improve understanding of the exact strength of the elliptic-curve discrete-logarithm problem, Certicom has published a series of challenges. This paper describes breaking the ECC2K-130 challenge using a parallelized version of Pollard\u27s rho method. This is a major computation bringing together the contributions of several clusters of conventional computers, PlayStation~3 clusters, computers with powerful graphics cards and FPGAs. We also give /preseestimates for an ASIC design. In particular we present * our choice and analysis of the iteration function for the rho method; * our choice of finite field arithmetic and representation; * detailed descriptions of the implementations on a multitude of platforms: CPUs, Cells, GPUs, FPGAs, and ASICs; * details about running the attack