A Stochastic Geometric Analysis of Device-to-Device Communications Operating over Generalized Fading Channels

Device-to-device (D2D) communications are now considered as an integral part of future 5G networks which will enable direct communication between user equipment (UE) without unnecessary routing via the network infrastructure. This architecture will result in higher throughputs than conventional cellular networks, but with the increased potential for co-channel interference induced by randomly located cellular and D2D UEs. The physical channels which constitute D2D communications can be expected to be complex in nature, experiencing both line-of-sight (LOS) and non-LOS (NLOS) conditions across closely located D2D pairs. As well as this, given the diverse range of operating environments, they may also be subject to clustering of the scattered multipath contribution, i.e., propagation characteristics which are quite dissimilar to conventional Rayeligh fading environments. To address these challenges, we consider two recently proposed generalized fading models, namely $\kappa-\mu$ and $\eta-\mu$, to characterize the fading behavior in D2D communications. Together, these models encompass many of the most widely encountered and utilized fading models in the literature such as Rayleigh, Rice (Nakagami-$n$), Nakagami-$m$, Hoyt (Nakagami-$q$) and One-Sided Gaussian. Using stochastic geometry we evaluate the rate and bit error probability of D2D networks under generalized fading conditions. Based on the analytical results, we present new insights into the trade-offs between the reliability, rate, and mode selection under realistic operating conditions. Our results suggest that D2D mode achieves higher rates over cellular link at the expense of a higher bit error probability. Through numerical evaluations, we also investigate the performance gains of D2D networks and demonstrate their superiority over traditional cellular networks.Comment: Submitted to IEEE Transactions on Wireless Communication

Sum-Rate Analysis for High Altitude Platform (HAP) Drones with Tethered Balloon Relay

High altitude platform (HAP) drones can provide broadband wireless connectivity to ground users in rural areas by establishing line-of-sight (LoS) links and exploiting effective beamforming techniques. However, at high altitudes, acquiring the channel state information (CSI) for HAPs, which is a key component to perform beamforming, is challenging. In this paper, by exploiting an interference alignment (IA) technique, a novel method for achieving the maximum sum-rate in HAP-based communications without CSI is proposed. In particular, to realize IA, a multiple-antenna tethered balloon is used as a relay between multiple HAP drones and ground stations (GSs). Here, a multiple-input multiple-output X network system is considered. The capacity of the considered M*N X network with a tethered balloon relay is derived in closed-form. Simulation results corroborate the theoretical findings and show that the proposed approach yields the maximum sum-rate in multiple HAPs-GSs communications in absence of CSI. The results also show the existence of an optimal balloon's altitude for which the sum-rate is maximized.Comment: Accepted in IEEE Communications Letter

A Comprehensive Analysis of 5G Heterogeneous Cellular Systems operating over κ\kappa-μ\mu Shadowed Fading Channels

Emerging cellular technologies such as those proposed for use in 5G communications will accommodate a wide range of usage scenarios with diverse link requirements. This will include the necessity to operate over a versatile set of wireless channels ranging from indoor to outdoor, from line-of-sight (LOS) to non-LOS, and from circularly symmetric scattering to environments which promote the clustering of scattered multipath waves. Unfortunately, many of the conventional fading models adopted in the literature to develop network models lack the flexibility to account for such disparate signal propagation mechanisms. To bridge the gap between theory and practical channels, we consider $\kappa$-$\mu$ shadowed fading, which contains as special cases, the majority of the linear fading models proposed in the open literature, including Rayleigh, Rician, Nakagami-m, Nakagami-q, One-sided Gaussian, $\kappa$-$\mu$, $\eta$-$\mu$, and Rician shadowed to name but a few. In particular, we apply an orthogonal expansion to represent the $\kappa$-$\mu$ shadowed fading distribution as a simplified series expression. Then using the series expressions with stochastic geometry, we propose an analytic framework to evaluate the average of an arbitrary function of the SINR over $\kappa$-$\mu$ shadowed fading channels. Using the proposed method, we evaluate the spectral efficiency, moments of the SINR, bit error probability and outage probability of a $K$-tier HetNet with $K$ classes of BSs, differing in terms of the transmit power, BS density, shadowing characteristics and small-scale fading. Building upon these results, we provide important new insights into the network performance of these emerging wireless applications while considering a diverse range of fading conditions and link qualities

Spectral and Energy Efficiency of Uplink D2D Underlaid Massive MIMO Cellular Networks

CCBY One of key 5G scenarios is that device-to-device (D2D) and massive multiple-input multiple-output (MIMO) will be co-existed. However, interference in the uplink D2D underlaid massive MIMO cellular networks needs to be coordinated, due to the vast cellular and D2D transmissions. To this end, this paper introduces a spatially dynamic power control solution for mitigating the cellular-to-D2D and D2D-to-cellular interference. In particular, the proposed D2D power control policy is rather flexible including the special cases of no D2D links or using maximum transmit power. Under the considered power control, an analytical approach is developed to evaluate the spectral efficiency (SE) and energy efficiency (EE) in such networks. Thus, the exact expressions of SE for a cellular user or D2D transmitter are derived, which quantify the impacts of key system parameters such as massive MIMO antennas and D2D density. Moreover, the D2D scale properties are obtained, which provide the sufficient conditions for achieving the anticipated SE. Numerical results corroborate our analysis and show that the proposed power control solution can efficiently mitigate interference between the cellular and D2D tier. The results demonstrate that there exists the optimal D2D density for maximizing the area SE of D2D tier. In addition, the achievable EE of a cellular user can be comparable to that of a D2D user