Resource Allocation for Device-to-Device Communications in Multi-Cell Multi-Band Heterogeneous Cellular Networks

Heterogeneous cellular networks (HCNs) with millimeter wave (mm-wave) communications are considered as a promising technology for the fifth generation mobile networks. Mm-wave has the potential to provide multiple gigabit data rate due to the broad spectrum. Unfortunately, additional free space path loss is also caused by the high carrier frequency. On the other hand, mm-wave signals are sensitive to obstacles and more vulnerable to blocking effects. To address this issue, highly directional narrow beams are utilized in mm-wave networks. Additionally, device-to-device (D2D) users make full use of their proximity and share uplink spectrum resources in HCNs to increase the spectrum efficiency and network capacity. Towards the caused complex interferences, the combination of D2D-enabled HCNs with small cells densely deployed and mm-wave communications poses a big challenge to the resource allocation problems. In this paper, we formulate the optimization problem of D2D communication spectrum resource allocation among multiple micro-wave bands and multiple mm-wave bands in HCNs. Then, considering the totally different propagation conditions on the two bands, a heuristic algorithm is proposed to maximize the system transmission rate and approximate the solutions with sufficient accuracies. Compared with other practical schemes, we carry out extensive simulations with different system parameters, and demonstrate the superior performance of the proposed scheme. In addition, the optimality and complexity are simulated to further verify effectiveness and efficiency.Comment: 13 pages, 11 figures, IEEE Transactions on Vehicular Technolog

A survey on hybrid beamforming techniques in 5G : architecture and system model perspectives

The increasing wireless data traffic demands have driven the need to explore suitable spectrum regions for meeting the projected requirements. In the light of this, millimeter wave (mmWave) communication has received considerable attention from the research community. Typically, in fifth generation (5G) wireless networks, mmWave massive multiple-input multiple-output (MIMO) communications is realized by the hybrid transceivers which combine high dimensional analog phase shifters and power amplifiers with lower-dimensional digital signal processing units. This hybrid beamforming design reduces the cost and power consumption which is aligned with an energy-efficient design vision of 5G. In this paper, we track the progress in hybrid beamforming for massive MIMO communications in the context of system models of the hybrid transceivers' structures, the digital and analog beamforming matrices with the possible antenna configuration scenarios and the hybrid beamforming in heterogeneous wireless networks. We extend the scope of the discussion by including resource management issues in hybrid beamforming. We explore the suitability of hybrid beamforming methods, both, existing and proposed till first quarter of 2017, and identify the exciting future challenges in this domain

Efficient Management of Multicast Traffic in Directional mmWave Networks

Multicasting is becoming more and more important in the Internet of Things (IoT) and wearable applications (e.g., high definition video streaming, virtual reality gaming, public safety, among others) that require high bandwidth efficiency and low energy consumption. In this regard, millimeter wave (mmWave) communications can play a crucial role to efficiently disseminate large volumes of data as well as to enhance the throughput gain in fifth-generation (5G) and beyond networks. There are, however, challenges to face in view of providing multicast services with high data rates under the conditions of short propagation range caused by high path loss at mmWave frequencies. Indeed, the strong directionality required at extremely high frequency bands excludes the possibility of serving all multicast users via a single transmission. Therefore, multicasting in directional systems consists of a sequence of beamformed transmissions to serve all multicast group members, subgroup by subgroup. This paper focuses on multicast data transmission optimization in terms of throughput and, hence, of the energy efficiency of resource-constrained devices such as wearables, running their resource-hungry applications. In particular, we provide a means to perform the beam switching and propose a radio resource management (RRM) policy that can determine the number and width of the beams required to deliver the multicast content to all interested users. Achieved simulation results show that the proposed RRM policy significantly improves network throughput with respect to benchmark approaches. It also achieves a high gain in energy efficiency over unicast and multicast with fixed predefined beams.acceptedVersionPeer reviewe

Efficient Management of Multicast Traffic in Directional mmWave Networks

Multicasting is becoming more and more important in the Internet of Things (IoT) and wearable applications (e.g., high definition video streaming, virtual reality gaming, public safety, among others) that require high bandwidth efficiency and low energy consumption. In this regard, millimeter wave (mmWave) communications can play a crucial role to efficiently disseminate large volumes of data as well as to enhance the throughput gain in fifth-generation (5G) and beyond networks. There are, however, challenges to face in view of providing multicast services with high data rates under the conditions of short propagation range caused by high path loss at mmWave frequencies. Indeed, the strong directionality required at extremely high frequency bands excludes the possibility of serving all multicast users via a single transmission. Therefore, multicasting in directional systems consists of a sequence of beamformed transmissions to serve all multicast group members, subgroup by subgroup. This paper focuses on multicast data transmission optimization in terms of throughput and, hence, of the energy efficiency of resource-constrained devices such as wearables, running their resource-hungry applications. In particular, we provide a means to perform the beam switching and propose a radio resource management (RRM) policy that can determine the number and width of the beams required to deliver the multicast content to all interested users. Achieved simulation results show that the proposed RRM policy significantly improves network throughput with respect to benchmark approaches. It also achieves a high gain in energy efficiency over unicast and multicast with fixed predefined beams.acceptedVersionPeer reviewe

Resource Allocation for Device-to-Device Communications Underlaying Heterogeneous Cellular Networks Using Coalitional Games

Heterogeneous cellular networks (HCNs) with millimeter wave (mmWave) communications included are emerging as a promising candidate for the fifth generation mobile network. With highly directional antenna arrays, mmWave links are able to provide several-Gbps transmission rate. However, mmWave links are easily blocked without line of sight. On the other hand, D2D communications have been proposed to support many content based applications, and need to share resources with users in HCNs to improve spectral reuse and enhance system capacity. Consequently, an efficient resource allocation scheme for D2D pairs among both mmWave and the cellular carrier band is needed. In this paper, we first formulate the problem of the resource allocation among mmWave and the cellular band for multiple D2D pairs from the view point of game theory. Then, with the characteristics of cellular and mmWave communications considered, we propose a coalition formation game to maximize the system sum rate in statistical average sense. We also theoretically prove that our proposed game converges to a Nash-stable equilibrium and further reaches the near-optimal solution with fast convergence rate. Through extensive simulations under various system parameters, we demonstrate the superior performance of our scheme in terms of the system sum rate compared with several other practical schemes.Comment: 13 pages, 12 figure