Content delivery over multi-antenna wireless networks

The past few decades have witnessed unprecedented advances in information technology, which have significantly shaped the way we acquire and process information in our daily lives. Wireless communications has become the main means of access to data through mobile devices, resulting in a continuous exponential growth in wireless data traffic, mainly driven by the demand for high quality content. Various technologies have been proposed by researchers to tackle this growth in 5G and beyond, including the use of increasing number of antenna elements, integrated point-to-multipoint delivery and caching, which constitute the core of this thesis. In particular, we study non-orthogonal content delivery in multiuser multiple-input-single-output (MISO) systems. First, a joint beamforming strategy for simultaneous delivery of broadcast and unicast services is investigated, based on layered division multiplexing (LDM) as a means of superposition coding. The system performance in terms of minimum required power under prescribed quality-of-service (QoS) requirements is examined in comparison with time division multiplexing (TDM). It is demonstrated through simulations that the non-orthogonal delivery strategy based on LDM significantly outperforms the orthogonal strategy based on TDM in terms of system throughput and reliability. To facilitate efficient implementation of the LDM-based beamforming design, we further propose a dual decomposition-based distributed approach. Next, we study an efficient multicast beamforming design in cache-aided multiuser MISO systems, exploiting proactive content placement and coded delivery. It is observed that the complexity of this problem grows exponentially with the number of subfiles delivered to each user in each time slot, which itself grows exponentially with the number of users in the system. Therefore, we propose a low-complexity alternative through time-sharing that limits the number of subfiles that can be received by a user in each time slot. Moreover, a joint design of content delivery and multicast beamforming is proposed to further enhance the system performance, under the constraint on maximum number of subfiles each user can decode in each time slot. Finally, conclusions are drawn in Chapter 5, followed by an outlook for future works.Open Acces

Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey

This paper provides a comprehensive review of the domain of physical layer security in multiuser wireless networks. The essential premise of physical-layer security is to enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers without relying on higher-layer encryption. This can be achieved primarily in two ways: without the need for a secret key by intelligently designing transmit coding strategies, or by exploiting the wireless communication medium to develop secret keys over public channels. The survey begins with an overview of the foundations dating back to the pioneering work of Shannon and Wyner on information-theoretic security. We then describe the evolution of secure transmission strategies from point-to-point channels to multiple-antenna systems, followed by generalizations to multiuser broadcast, multiple-access, interference, and relay networks. Secret-key generation and establishment protocols based on physical layer mechanisms are subsequently covered. Approaches for secrecy based on channel coding design are then examined, along with a description of inter-disciplinary approaches based on game theory and stochastic geometry. The associated problem of physical-layer message authentication is also introduced briefly. The survey concludes with observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials, 201

Green Wireless Internet Technology

YesIET Editorial: In the future communications will be pervasive in nature, allowing users access at the “touch of button” to attain any service, at any time, on any device. The future device design process requires both a reconfigurable RF front end and back end with high tuning speed, energy efficiency, excellent linearity and intelligence to maximise the “greenness” of the network. But energy efficiency and excellent linearity are the main topics that are driving the designs of future transceivers, including their efforts to minimise network contributions to climate changes such as the effect of CO2 emissions: the minimisation of these is a requirement for information and communication technology (ICT) as much as for other technologies. Recently, information and communication technologies were shown to account for 3% of global power consumption and 2% of global CO2 emissions, and hence far from insignificant. The approach towards energy conservation and CO2 reduction in future communications will require a gret deal of effort which should be targeted both at the design of energy efficient, low-complexity physical, MAC and network layers, while maintaining the required Quality of Service (QoS). There is also a need, in infrastructures, networks and user terminals, to take a more holistic approach to improving or achieving green communications, from radio operation, through functionality, up to implementation. The increasing demand for data and voice services is not the only cause for concern since energy management and conservation are now at the forefront of the political agenda. The vision of Europe 2020 is to become a smart, sustainable and inclusive economy, and as part of these priorities the EU have set forth the 20:20:20 targets, whereby greenhouse gas emissions and energy consumption should be reduced by 20% while energy from renewables should be increased by 20%

Multiple Access in Aerial Networks: From Orthogonal and Non-Orthogonal to Rate-Splitting

Recently, interest on the utilization of unmanned aerial vehicles (UAVs) has aroused. Specifically, UAVs can be used in cellular networks as aerial users for delivery, surveillance, rescue search, or as an aerial base station (aBS) for communication with ground users in remote uncovered areas or in dense environments requiring prompt high capacity. Aiming to satisfy the high requirements of wireless aerial networks, several multiple access techniques have been investigated. In particular, space-division multiple access(SDMA) and power-domain non-orthogonal multiple access (NOMA) present promising multiplexing gains for aerial downlink and uplink. Nevertheless, these gains are limited as they depend on the conditions of the environment. Hence, a generalized scheme has been recently proposed, called rate-splitting multiple access (RSMA), which is capable of achieving better spectral efficiency gains compared to SDMA and NOMA. In this paper, we present a comprehensive survey of key multiple access technologies adopted for aerial networks, where aBSs are deployed to serve ground users. Since there have been only sporadic results reported on the use of RSMA in aerial systems, we aim to extend the discussion on this topic by modelling and analyzing the weighted sum-rate performance of a two-user downlink network served by an RSMA-based aBS. Finally, related open issues and future research directions are exposed.Comment: 16 pages, 6 figures, submitted to IEEE Journa

noteEd - A web-based lecture capture system

Electronic capture and playback of lectures has long been the aim of many academic projects. Synote is an application developed under MACFoB (Multimedia Annotation and Community Folksonomy Building) project to synchronise the playback of lecture materials. However, Synote provides no functionality to capture such multimedia. This project involves the creation of a system called noteEd, which will capture a range of multimedia from lectures and make them available to Synote. This report describes the evolution of the noteEd project throughout the design and implementation of the proposed system. The performance of the system was checked in a user acceptance test with the customer, which is discussed after screenshots of our solution. Finally, the project management is presented containing a final project evaluation

Full-duplex wireless communications: challenges, solutions and future research directions

The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time-slots or frequency sub-bands. Hence the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyse the main impairments (e.g. phase noise, power amplifier nonlinearity as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD based Media Access Control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communication

Bandwidth management in live virtual machine migration

In this thesis I investigated the bandwidth management problem on live migration of virtual machine in different environment. First part of the thesis is dedicated to intra-data-center bandwidth optimization problem, while in the second part of the document I present the solution for wireless live migration in 5G and edge computing emerging technologies. Live virtual machine migration aims at enabling the dynamic balanced use of the networking/computing physical resources of virtualized data centers, so to lead to reduced energy consumption and improve data centers’ flexibility. However, the bandwidth consumption and latency of current state-of-the-art live VM migration techniques still reduce the experienced benefits to much less than their potential. Motivated by this consideration I analytically characterize and test the optimal bandwidth manager for intra-data-center live migration of VMs. The goal is to min- imize the migration-induced communication energy consumption under service level agreement (SLA)-induced hard constraints on the total migration time, downtime, slowdown of the migrating applications and overall available bandwidth