A Tutorial on Environment-Aware Communications via Channel Knowledge Map for 6G

Sixth-generation (6G) mobile communication networks are expected to have dense infrastructures, large-dimensional channels, cost-effective hardware, diversified positioning methods, and enhanced intelligence. Such trends bring both new challenges and opportunities for the practical design of 6G. On one hand, acquiring channel state information (CSI) in real time for all wireless links becomes quite challenging in 6G. On the other hand, there would be numerous data sources in 6G containing high-quality location-tagged channel data, making it possible to better learn the local wireless environment. By exploiting such new opportunities and for tackling the CSI acquisition challenge, there is a promising paradigm shift from the conventional environment-unaware communications to the new environment-aware communications based on the novel approach of channel knowledge map (CKM). This article aims to provide a comprehensive tutorial overview on environment-aware communications enabled by CKM to fully harness its benefits for 6G. First, the basic concept of CKM is presented, and a comparison of CKM with various existing channel inference techniques is discussed. Next, the main techniques for CKM construction are discussed, including both the model-free and model-assisted approaches. Furthermore, a general framework is presented for the utilization of CKM to achieve environment-aware communications, followed by some typical CKM-aided communication scenarios. Finally, important open problems in CKM research are highlighted and potential solutions are discussed to inspire future work

Physical Layer Challenges and Solutions in Seamless Positioning via GNSS, Cellular and WLAN Systems

As different positioning applications have started to be a common part of our lives, positioning methods have to cope with increasing demands. Global Navigation Satellite System (GNSS) can offer accurate location estimate outdoors, but achieving seamless large-scale indoor localization remains still a challenging topic. The requirements for simple and cost-effective indoor positioning system have led to the utilization of wireless systems already available, such as cellular networks and Wireless Local Area Network (WLAN). One common approach with the advantage of a large-scale standard-independent implementation is based on the Received Signal Strength (RSS) measurements.This thesis addresses both GNSS and non-GNSS positioning algorithms and aims to offer a compact overview of the wireless localization issues, concentrating on some of the major challenges and solutions in GNSS and RSS-based positioning. The GNSS-related challenges addressed here refer to the channel modelling part for indoor GNSS and to the acquisition part in High Sensitivity (HS)-GNSS. The RSSrelated challenges addressed here refer to the data collection and calibration, channel effects such as path loss and shadowing, and three-dimensional indoor positioning estimation.This thesis presents a measurement-based analysis of indoor channel models for GNSS signals and of path loss and shadowing models for WLAN and cellular signals. Novel low-complexity acquisition algorithms are developed for HS-GNSS. In addition, a solution to transmitter topology evaluation and database reduction solutions for large-scale mobile-centric RSS-based positioning are proposed. This thesis also studies the effect of RSS offsets in the calibration phase and various floor estimators, and offers an extensive comparison of different RSS-based positioning algorithms

Fast Graph - organic 3D graph for unsupervised location and mapping

It is well-known that fingerprinting-based positioning requires an exhaustive calibration phase to create a radio map, which often requires recalibration. Model-based and geometric approaches try to mitigate this effort at the expense of a lower accuracy or high computational cost. This paper introduces FastGraph, where a 3D graph is used to rapidly model the radio propagation environment. By means of unsupervised techniques, FastGraph is able to operate shortly after its deployment without previous knowledge about the environment. The proposed solution uses a novel algorithm to automatically provide location while simultaneously updating the radio map; and learn the position of the Access Points (APs) and location-specific radio propagation parameters. FastGraph has been evaluated in two real-world environments, a factory-plant and a regular university building, with results comparable to those obtained by conventional radio map-based solutions.This work has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT – Fundação para a Ciência eTecnologia within the Project Scope: UID/CEC/00319/2013 and the PhD fellowship PD/BD/105865/201

A Framework for Indoor Positioning Including Building Topology

In many application domains, position information is of fundamental importance. However, unlike the case of outdoor positioning, producing an accurate position estimation in the indoor setting turns out to be quite difficult. One of the most common localisation strategies makes use of fingerprinting. Research in this area has been faced with a number of challenges, leading to the proposal of a number of localisation algorithms, sampling strategies, benchmark datasets, and representations of building information. This proliferation made the modeling of the indoor positioning domain quite hard from both a theoretical and a practical point of view. In this paper, we propose a general and extensible framework, based on a relational database, that pairs fingerprints with building information. We show how the proposed system successfully deals with a number of problems that affect indoor positioning, supporting a large set of relevant tasks. The source code of the framework is available online, as well as an implementation of it, that provides an interactive open repository of indoor positioning data

Autoencoder extreme learning machine for fingerprint-based positioning: A good weight initialization is decisive

Indoor positioning based on machine-learning (ML) models has attracted widespread interest in the last few years, given its high performance and usability. Supervised, semisupervised, and unsupervised models have thus been widely used in this field, not only to estimate the user position, but also to compress, clean, and denoise fingerprinting datasets. Some scholars have focused on developing, improving, and optimizing ML models to provide accurate solutions to the end user. This article introduces a novel method to initialize the input weights in autoencoder extreme learning machine (AE-ELM), namely factorized input data (FID), which is based on the normalized form of the orthogonal component of the input data. AE-ELM with FID weight initialization is used to efficiently reduce the radio map. Once the dimensionality of the dataset is reduced, we use k -nearest neighbors to perform the position estimation. This research work includes a comparative analysis with several traditional ways to initialize the input weights in AE-ELM, showing that FID provide a significantly better reconstruction error. Finally, we perform an assessment with 13 indoor positioning datasets collected from different buildings and in different countries. We show that the dimensionality of the datasets can be reduced more than 11 times on average, while the positioning error suffers only a small increment of 15% (on average) in comparison to the baseline

A Meta-Review of Indoor Positioning Systems

An accurate and reliable Indoor Positioning System (IPS) applicable to most indoor scenarios has been sought for many years. The number of technologies, techniques, and approaches in general used in IPS proposals is remarkable. Such diversity, coupled with the lack of strict and verifiable evaluations, leads to difficulties for appreciating the true value of most proposals. This paper provides a meta-review that performed a comprehensive compilation of 62 survey papers in the area of indoor positioning. The paper provides the reader with an introduction to IPS and the different technologies, techniques, and some methods commonly employed. The introduction is supported by consensus found in the selected surveys and referenced using them. Thus, the meta-review allows the reader to inspect the IPS current state at a glance and serve as a guide for the reader to easily find further details on each technology used in IPS. The analyses of the meta-review contributed with insights on the abundance and academic significance of published IPS proposals using the criterion of the number of citations. Moreover, 75 works are identified as relevant works in the research topic from a selection of about 4000 works cited in the analyzed surveys

EWOk: towards efficient multidimensional compression of indoor positioning datasets

Indoor positioning performed directly at the end-user device ensures reliability in case the network connection fails but is limited by the size of the RSS radio map necessary to match the measured array to the device’s location. Reducing the size of the RSS database enables faster processing, and saves storage space and radio resources necessary for the database transfer, thus cutting implementation and operation costs, and increasing the quality of service. In this work, we propose EWOk, an Element-Wise cOmpression using k-means, which reduces the size of the individual radio measurements within the fingerprinting radio map while sustaining or boosting the dataset’s positioning capabilities. We show that the 7-bit representation of measurements is sufficient in positioning scenarios, and reducing the data size further using EWOk results in higher compression and faster data transfer and processing. To eliminate the inherent uncertainty of k-means we propose a data-dependent, non-random initiation scheme to ensure stability and limit variance. We further combine EWOk with principal component analysis to show its applicability in combination with other methods, and to demonstrate the efficiency of the resulting multidimensional compression. We evaluate EWOk on 25 RSS fingerprinting datasets and show that it positively impacts compression efficiency, and positioning performance.This work was supported by the European Union’s Horizon 2020 Research and Innovation programme under the Marie Sklodowska Curie grant agreements No. 813278 (A-WEAR: A network for dynamic wearable applications with privacy constraints, http://www.a-wear.eu/) and No. 101023072 (ORIENTATE: Low-cost Reliable Indoor Positioning in Smart Factories, http://orientate.dsi.uminho.pt) and Academy of Finland (grants #319994, #323244)

Understanding mobile network quality and infrastructure with user-side measurements

Measurement collection is a primary step towards analyzing and optimizing performance of a telecommunication service. With an Mobile Broadband (MBB) network, the measurement process has not only to track the network’s Quality of Service (QoS) features but also to asses a user’s perspective about its service performance. The later requirement leads to “user-side measurements” which assist in discovery of performance issues that makes a user of a service unsatisfied and finally switch to another network. User-side measurements also serve as first-hand survey of the problem domain. In this thesis, we exhibit the potential in the measurements collected at network edge by considering two well-known approaches namely crowdsourced and distributed testbed-based measurements. Primary focus is on exploiting crowdsourced measurements while dealing with the challenges associated with it. These challenges consist of differences in sampling densities at different parts of the region, skewed and non-uniform measurement layouts, inaccuracy in sampling locations, differences in RSS readings due to device-diversity and other non-ideal measurement sampling characteristics. In presence of heterogeneous characteristics of the user-side measurements we propose how to accurately detect mobile coverage holes, to devise sample selection process so to generate a reliable radio map with reduced sample cost, and to identify cellular infrastructure at places where the information is not public. Finally, the thesis unveils potential of a distributed measurement test-bed in retrieving performance features from domains including user’s context, service content and network features, and understanding impact from these features upon the MBB service at the application layer. By taking web-browsing as a case study, it further presents an objective web-browsing Quality of Experience (QoE) model

Positioning in 5G and 6G Networks—A Survey

Determining the position of ourselves or our assets has always been important to humans. Technology has helped us, from sextants to outdoor global positioning systems, but real-time indoor positioning has been a challenge. Among the various solutions, network-based positioning became an option with the arrival of 5G mobile networks. The new radio technologies, minimized end-to-end latency, specialized control protocols, and booming computation capacities at the network edge offered the opportunity to leverage the overall capabilities of the 5G network for positioning—indoors and outdoors. This paper provides an overview of network-based positioning, from the basics to advanced, state-of-the-art machine-learning-supported solutions. One of the main contributions is the detailed comparison of machine learning techniques used for network-based positioning. Since new requirements are already in place for 6G networks, our paper makes a leap towards positioning with 6G networks. In order to also highlight the practical side of the topic, application examples from different domains are presented with a special focus on industrial and vehicular scenarios

Enabling generic wireless coexistence through technology-agnostic dynamic spectrum access

Every year that passes, new standardized and proprietary wireless communication technologies are introduced in the market that seeks to find its place within the already highly congested spectrum. Regulation bodies all around the globe are struggling to keep up with the continuously increasing demand for new bands to offer to specific technologies, some of them requiring by design an exclusive frequency band in order to operate efficiently. Even wireless bands offered for public or scientific usage like the ISM bands are becoming the natural habitat of multiple wireless technologies that seek to use or abuse them in order to provide even more bandwidth to their offered applications. Wireless research teams targeting heterogeneous wireless communication coexistence are developing techniques for enabling one-to-one coexistence between various wireless technologies. Can such an exhaustive approach be the solution for N wireless technologies that wish to operate in the same band? We believe that a one-to-one approach is inefficient and cannot lead to a generic coexistence paradigm, applicable to every existing or new wireless communication technology that will arise in the future. Can another approach provide a more generic solution in terms of frequency reuse and coexistence compared to the one-dimensional frequency separation approach commonly used in commercial deployments today. Can such a generic approach provide a simple and easily adoptable coexistence model for existing technologies? In this paper we present a new generic medium sharing model that solves the huge coexistence problems observed today in a simple and efficient way. Our approach is technology-agnostic and compatible with all existing wireless communication technologies and also has the capability to support emerging ones with minimum overhead