Variation-Aware Modeling and Design of Nanophotonic Interconnects

Optical interconnects have started to replace electrical interconnects in the communications between racks and circuit boards with potential benefits in bandwidth, delay, power efficiency, and crosstalk. Silicon photonics has emerged to be a highly promising enabling technology for the short-reach nanophotonic interconnects because it offers favorable CMOS compatibility and high integration level. The fast-growing complexity of photonic integrated circuit (PIC) and close electro-optical integration call for computer-aided design (CAD) for integrated photonics, and electronic-photonic design automation (EPDA) including accurate behavior models and efficient simulation methodologies for integrated electro-optical systems. Also, the nanophotonic devices are highly sensitive to fabrication process variation and thermal variation effects, which requires proper modeling, optimization, and management schemes. To address these problems, this thesis is dedicated to the following two tasks: (1) compact modeling and circuit-level simulation of nanophotonic interconnects, and (2) power-efficient management of the variation effects in nanophotonic interconnects.The first part of the thesis develops compact models for key components in nanophotonic interconnects including silicon microring modulators, diode lasers, electro-absorption modulators (EAM), photodetectors, etc. These compact models are developed based on their electrical and optical properties, and are then extensively validated by measurement data. The model parameters are extracted from common electrical and optical tests. Implemented in Verilog-A, the models are used in SPICE simulations of optical links, whose results again agree well with measurement data. The compact model library and the simulation methodology enable electro-optical co-simulations and optical device design explorations in the circuit-level.In the second part of the thesis, we propose modeling methods and power-efficient management schemes for the process and thermal variations in optical interconnects. The proposed adaptive tuning technique performs on-chip self-tests and adaptively allocates just enough power for link operations. The technique saves significant amount of power compared to worst-case based conservative designs, and scales well w.r.t. variations and network size. We also design power-efficient pairing algorithms for microring-based optical interconnects. Our algorithms optimally mix-and-match microring-based devices to minimize the power consumption for tuning. The algorithms are tested on both measured and synthetic data sets, demonstrating promising results of power reduction and scalability for handling a large number of devices. Lastly, we decompose and analyze wafer-scale spatial patterns of process variations in microring modulators. We further investigate the correlations between the spatial patterns and fabrication process steps, which is valuable for understanding process variation sources and improving fabrication processes for uniformity

Thermal Aware Design Method for VCSEL-Based On-Chip Optical Interconnect

Optical Network-on-Chip (ONoC) is an emerging technology considered as one of the key solutions for future generation on-chip interconnects. However, silicon photonic devices in ONoC are highly sensitive to temperature variation, which leads to a lower efficiency of Vertical-Cavity Surface-Emitting Lasers (VCSELs), a resonant wavelength shift of Microring Resonators (MR), and results in a lower Signal to Noise Ratio (SNR). In this paper, we propose a methodology enabling thermal-aware design for optical interconnects relying on CMOS-compatible VCSEL. Thermal simulations allow designing ONoC interfaces with low gradient temperature and analytical models allow evaluating the SNR.Comment: IEEE International Conference on Design Automation and Test in Europe (DATE 2015), Mar 2015, Grenoble, France. 201

Detection and Monitoring Intra/Inter Crosstalk in Optical Network on Chip

Multiprocessor system-on-chip (MPSoC) has become an attractive solution for improving the performance of single chip in objective to satisfy the performance growing exponentially of the computer applications as multimedia applications. However, the communication between the different processors’ cores presents the first challenge front the high performance of MPSoC. Besides, Network on Chip (NoC) is among the most prominent solution for handling the on-chip communication. Besides, NoC potential limited by physical limitation, power consumption, latency and bandwidth in the both case: increasing data exchange or scalability of Multicores. Optical communication offers a wider bandwidth and lower power consumption, based on, a new technology named Optical Network-on-Chip (ONoC) has been introduced in MPSoC. However, ONoC components induce the crosstalk noise in the network on both forms intra/inter crosstalk. This serious problem deteriorates the quality of signals and degrades network performance. As a result, detection and monitoring the impairments becoming a challenge to keep the performance in the ONoC. In this article, we propose a new system to detect and monitor the crosstalk noise in ONoC. Particularly, we present an analytic model of intra/inter crosstalk at the optical devices. Then, we evaluate these impairments in objective to present the motivation to detect and monitor crosstalk in ONoC, in which our system has the capability to detect, to localize, and to monitor the crosstalk noise in the whole network. This system offers high reliability, scalability and efficiency with time running time less than 20 ms

Open-access silicon photonics: current status and emerging initiatives

Silicon photonics is widely acknowledged as a game-changing technology driven by the needs of datacom and telecom. Silicon photonics builds on highly capital-intensive manufacturing infrastructure, and mature open-access silicon photonics platforms are translating the technology from research fabs to industrial manufacturing levels. To meet the current market demands for silicon photonics manufacturing, a variety of open-access platforms is offered by CMOS pilot lines, R&D institutes, and commercial foundries. This paper presents an overview of existing and upcoming commercial and noncommercial open-access silicon photonics technology platforms. We also discuss the diversity in these open-access platforms and their key differentiators

Energy-efficient electrical and silicon-photonic networks in many core systems

Thesis (Ph.D.)--Boston UniversityDuring the past decade, the very large scale integration (VLSI) community has migrated towards incorporating multiple cores on a single chip to sustain the historic performance improvement in computing systems. As the core count continuously increases, the performance of network-on-chip (NoC), which is responsible for the communication between cores, caches and memory controllers, is increasingly becoming critical for sustaining the performance improvement. In this dissertation, we propose several methods to improve the energy efficiency of both electrical and silicon-photonic NoCs. Firstly, for electrical NoC, we propose a flow control technique, Express Virtual Channel with Taps (EVC-T), to transmit both broadcast and data packets efficiently in a mesh network. A low-latency notification tree network is included to maintain t he order of broadcast packets. The EVC-T technique improves the NoC latency by 24% and the system energy efficiency in terms of energy-delay product (EDP) by 13%. In the near future, the silicon-photonic links are projected to replace the electrical links for global on-chip communication due to their lower data-dependent power and higher bandwidth density, but the high laser power can more than offset these advantages. Therefore, we propose a silicon-photonic multi-bus NoC architecture and a methodology that can reduce the laser power by 49% on average through bandwidth reconfiguration at runtime based on the variations in bandwidth requirements of applications. We also propose a technique to reduce the laser power by dynamically activating/deactivating the 12 cache banks and switching ON/ OFF the corresponding silicon-photonic links in a crossbar NoC. This cache-reconfiguration based technique can save laser power by 23.8% and improves system EDP by 5.52% on average. In addition, we propose a methodology for placing and sharing on-chip laser sources by jointly considering the bandwidth requirements, thermal constraints and physical layout constraints. Our proposed methodology for placing and sharing of on-chip laser sources reduces laser power. In addition to reducing the laser power to improve the energy efficiency of silicon-photonic NoCs, we propose to leverage the large bandwidth provided by silicon-photonic NoC to share computing resources. The global sharing of floating-point units can save system area by 13.75% and system power by 10%